AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  CARME  ELOG logo
Message ID: 156     Entry time: Wed Nov 17 07:12:22 2021
Author: RSS CB + ML (remotely) 
Subject: CARME baking with tape continues 17 Nov 

CARME baking with heating tape continues

Left overnight at -

Ch1-3: 140 degrees

Ch5-6: 150 degrees

Ch8:    100 degrees

 

07:50 - Increased channels 1-3 to 150, channels 5 and 6 to 160, and channel 8 remain at 100. For the gas jet target, channel 2 increased to 150.

12:39 - Increased channels 5 and 6 to 170 C. All of CARME is >100 C except "Magnet Pipe" that is at 95 (probably OK given proximity to gate valve). 

13:40 - Decreased channel 5 to 160 C. Bottom back of CARME was going up, but rest of chamber was not following along. Thermal gradients were getting excessive.

15:10 - Checked Kapton wire specs from Allectra. Max temperature of 311-KAPM-060 is 260 C in a vacuum not 160 C as erroneously remembered. Increased Ch 1 2 3 to 160 and channel 5 to 170. Planning on leaving until weekend.


 

Progress can be followed on

http://web-docs.gsi.de/~lestinsk/baking.php

http://web-docs.gsi.de/~lestinsk/vacplot.php

Attachment 1: IMG_5600.JPG  2.129 MB  | Hide | Hide all
IMG_5600.JPG
Attachment 2: IMG_5602.JPG  2.413 MB  | Hide | Hide all
IMG_5602.JPG
Attachment 3: 20211117_122601.jpg  2.182 MB  Uploaded Wed Nov 17 11:43:26 2021  | Hide | Hide all
20211117_122601.jpg
Attachment 4: 20211117_151041.jpg  2.603 MB  Uploaded Wed Nov 17 14:14:52 2021  | Hide | Hide all
20211117_151041.jpg
Attachment 5: 20211117_151500.jpg  2.725 MB  Uploaded Wed Nov 17 14:15:26 2021  | Hide | Hide all
20211117_151500.jpg
Attachment 6: Kaptonwires-overview.pdf  155 kB  Uploaded Wed Nov 17 14:27:23 2021  | Hide | Hide all
Kaptonwires-overview.pdf Kaptonwires-overview.pdf Kaptonwires-overview.pdf Kaptonwires-overview.pdf
Attachment 7: CARMEtemps.png  126 kB  Uploaded Wed Nov 17 14:34:49 2021  | Hide | Hide all
CARMEtemps.png
ELOG V3.1.4-unknown