Used thermocamera provided by GSI beam diagnostic division to take some pictures of YR09. See attached.

Due to aluminium outer wrapping some reflections are inevitable, but tried to only take pictures of heat spots that did not disapper from different angles.

Temperature calibration may be not perfectly reliable as well.

1. Gap close to CARME outside motors

2. CARME top valve

3. CARME top valve

4. CARME turbo

5. Interaction chamber looking downstream from outside of ring. Note flexible hose pumping Be window.

6. As 5, from inside the ring.

7. Interaction chamber detail (see top left in picture above)

8. IE514 sensor on interaction chamber bottom

9. YR09 from inside the ring. Note electron target

10. As above, looking further upstream

11. YR09 from inside the ring, looking downstream towards CARME

12. Electron target from inside the ring

13. Electron target from outside the ring. Biggest flange.

14. Interaction chamber from inside the ring