22:16

Temperature setpoint = 113k

Not observed noise burst again

Target density OK, S1 between 2E-8 and 3E-8mbar, E4 between 1E-9 and 1E-8 mbar.

Detector moving well, potentionmer between 23.1 mm and 67.43 mm, move in/move out counters the same. Correlation scalar on aida1

Ruthrford peak varies between 10^3 and 10^2 peak height depending on detector position, noise rate also varies with position.

Beam intensity ~1E8

Merger OK

Data rate ~ 1200 kb/sec

Temperatures OK

System checks OK - wr fails

         Base         Current     Difference
aida01 fault      0xab60 :      0xaba4 :      68  
aida02 fault      0x88d3 :      0x8915 :      66  
aida03 fault      0x23aa :      0x23ee :      68  
aida04 fault      0x15d7 :      0x161b :      68  
aida05 fault      0x2f03 :      0x2f20 :      29  
White Rabbit error counter test result: Passed 0, Failed 5

Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR

Ring pressure oscillation is 30 minute cycle on all areas of the ring.