System checks: all ok
Attatchment 1: Rates ok
Attatchment 2: Temperatures ok
Attatchment 3: Waveform layout 7
Attatchment 4: Waveform layout 8
Attatchment 5: Waveform layout 1
Attatchment 6: Waveform layout 2
Attatchment 7: Leakage current ok
Moved pneumatic / servo for right / left arms in /out
Attachment 8: left servo fully in
9: left pneumatic in (beam is clipped)
10: left pneumatic & servo in (beam is clipped)
11: right servo in
12: right pneumatic in
13: right pneumatic & serve in
Some clear issues with strip mapping persist.
Strip map
#map strip: 01:00 left/top side, 02:00 right/bottom side (from beam view)
stripMap 1 2
stripMap 2 1
stripMap 3 2
stripMap 4 1
stripMap 5 2
stripMap 6 1
stripMap 7 2
stripMap 8 1
stripMap 9 1
stripMap 10 2
stripMap 11 1
stripMap 12 2
stripMap 13 1
stripMap 14 2
stripMap 15 1
stripMap 16 2
/////// UPDATE /////////
System checks: all ok - except waveform for AIDA 15 in layout 2, it has a low rate compared to others
Attatchment 14: Rates ok
Attatchment 15: Temperatures ok
Attatchment 16: Waveform layout 7
Attatchment 17: Waveform layout 8
Attatchment 18: Waveform layout 2
Attatchment 19: Waveform layout 1
Attatchment 20: Leakage current ok
/////// UPDATE //////
After beam stiring - layout of xy histograms are updated
DSSD0 and DSSD3 have the correct orientation,
DSSD1 needs to be flipped mirrored on the yaxis (i.e. right needs to be left, and left needs to be right but up and down are correct)
DSSD2 needs to be flipped on the xaxis (i.e. up needs to be down and down needs to be up but left and right are correct)
Horizontal offset in YR3 target = 9mm
Horizontal offset in YR7 target = 9mm
Horizontan offset in YR9 target = -9mm
Vertial offset in YR9 target = -8mm
Attatchment 21: Beam profile before stiring
Attatchment 22: Beam profile after stiritng - much better, hitting detectors less.
/// UPDATE ///
Mapping for the sort code has been fixed so that detectors are orientated correctly as if looking at the detectors downstream.We was missing dssdPNisX command which lets the sort code know if the PN FEEs correspond to X or Y. Correct mapping is now;
stripMap 1 1
stripMap 2 2
stripMap 3 1
stripMap 4 2
stripMap 5 1
stripMap 6 2
stripMap 7 2
stripMap 8 1
stripMap 9 2
stripMap 10 1
stripMap 11 1
stripMap 12 2
stripMap 13 1
stripMap 14 2
stripMap 15 1
stripMap 16 2
|