Run number changed 09:44 - Now run 23
Moving motors with the injection
Ring signal very weird, moving in for short time and staying out for 15+ seconds.
R24
Right arm FULLY in (70.49 mm)
Left arm SERVOS ONLY in (36.54)
No appreciable effect on beam (not clipping beam at injection / during circulation)
ML fixed signal cycle. It's now 8 seconds in, 5 seconds out. Motors still not moving. Acquiring more stats in the current conditions.
11:07 - Temps & System wide checks good
Stats as before.
Leakage currents & pressure good.
11:44
Leakage current ok. pressure good. Temperatures ok. Merger ok. System wide checks ok.
In with the left 36.5
In with the right 70.5
Attatchment 1: Rates
Attatchment 2: Temperatures
Attatchment 3: Waveforms layout 7
Attatchment 4: Waveforms layout 8
Attatchment 5: Waveforms layout 1
Attatchment 6: Waveforms layout 2
Attatchment 7: Leakage current
Attatchment 8: lowenergyXYtotal all 4 dets
Attatchment 9: lowenergyExEy all dets
Attatchment 10: loveenergyvExEy
Attachment 11: screenshot from the Shottky
14:00 Run 24 stopped to allow access to the cave.
Helium and liquid nitrogen re-filled in the target.
Pulser walkthrough performed R25.
Turned CARME turbo ON, pressure in the ring with target on is reduced by a factor 2.
Tried to find electron cooler voltages to determine the beam energy. We were unable to do this. Hopefully we find out tomorrow.
|