ELOG CARME

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

CARME, Page 22 of 34

Full | Summary | Threaded | Hide attachments

662 Entries

Goto page Previous 1, 2, 3 ... 21, 22, 23 ... 32, 33, 34 Next

Selected entries:

	ID	Date	Author	Subject
	246	Wed Feb 23 00:54:17 2022	Jordan, George	Current status
02:04 Temps OK Data Rate - ~1.1Mb/s System Check OK White rabbit diff - 83 Leakage Current - ~3.475uA YR09 AVG: 7.51E-10mbar YR10AVG: 1.21E-10mbar YR07AVG: 1.67E-9mbar YR08AVG: 1.91E-9mbar
Attachment 1: 2022-02-23_02-02-53extotal.png

Attachment 2: 2022-02-23_02-02-00lowEnergyXYtot.png

Attachment 3: 2022-02-23_01-59-14exRate.png

	245	Tue Feb 22 21:57:13 2022	George, Jordan	Current status
23:53 Temperatures OK System checks OK - white rabbit fail diff ~ 80 Pressures stable Cryo temp = 129.2 K setpoint Data rate ~1.2 MB/s Leakage current ~ 3.47 uA 00:53 YR10 avg = 1.29E-10 mbar YR09 avg = 8.7E-10 mbar YR04 avg = 1.13E-11 mbar YR07 avg = 1.76E-10 mbar YR08 avg = 2.18E-9 mbar Data rate ~ 1.1 Mb/s Temperatures OK system checks OK - white rabbit fail diff ~ 80 Pressure stable, cryostat temp setpoint = 129.2k Leakage current = 3.47 uA Beam intensity reads ~ 2.6-3E7
Attachment 1: 2022-02-22_23-53-38-lowenergy-xytotal.png

Attachment 2: 2022-02-22_23-50-45-Ex-rate-hist.png

Attachment 3: 2022-02-22_23-49-20-Ex-total-hist.png

Attachment 4: 20220223_002946.jpg

	244	Tue Feb 22 21:09:39 2022	David, Yuri	Current status
Pressure seems as before 19:10. Merger, Tape server (WS3) checks: DONE, writing ~1 MB/s, refreshing is fine Leakage current (WS4): 3.47 uA , stable current DAQ (WS2): temperature checked, clock status:ok, adc calibration:ok, white rabbit check:ok DAQ (WS2): everything ok Online monitoring (WS 5): done
Attachment 1: 2022-02-22_22-12-55xytotal.png

Attachment 2: 2022-02-22_22-12-21exrate.png

Attachment 3: 2022-02-22_22-12-00extotal.png

	243	Tue Feb 22 20:08:40 2022	David, Yuri	Current status
Recently the pressure started to raise a bit, we have increased the temperature from 129.1 K to 129.2 K. Current pressure at S1 2.10e-7. Merger, Tape server (WS3) checks: DONE, writing ~1 MB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, clock status:ok, adc calibration:ok, white rabbit check:ok DAQ (WS2): everything ok Online monitoring (WS 5): done
Attachment 1: 2022-02-22_21-14-23exrate.png

Attachment 2: 2022-02-22_21-14-01xytotal.png

Attachment 3: 2022-02-22_21-13-11extotal.png

	242	Tue Feb 22 19:28:35 2022	David, Yuri	vacuum
At 19:10 Frank called us that vacuum in sections 08 and 10 got worse by about 1.5 times. There is a possible danger that vacuum valves can get closed if rest gas pressure is above the set treshhold. Nikos warmed the cryostat by 0.5 degrees from 129.0 K to 129.5 K and the pressure became better than before. We cooled the system in steps of 0.1 degress down to 129.1 K and again observed the pressure rise. We think we can stay with the present conditions. However, the pressure shall be monitored not to hit the treshhold.
	241	Tue Feb 22 19:11:18 2022	David	Current status
Still trying to recover previous pressures, more details in the next entry. Merger, Tape server (WS3) checks: DONE, writing ~1030 kB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, DAQ (WS2): everything ok Online monitoring (WS 5): done;
Attachment 1: 2022-02-22_20-16-26eyrate.png

Attachment 2: 2022-02-22_20-15-34.eytotal.png

	240	Tue Feb 22 18:23:02 2022	David. Yury	Vacuum problem
At 19:10 the vacuum has increased suddenly everywhere in the ring, roughly a factor 1.5.
	239	Tue Feb 22 17:32:38 2022	David	Current status
Michael is modifying the settings of the electron cooler --> changed beam from bunched to coasting Merger, Tape server (WS3) checks: DONE, writing ~1036 kB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, - clock status: Clock status test result: Passed 5, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable - adc calibration: Calibration test result: Passed 5, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module - white rabbit check: Base Current Difference aida01 fault 0xc228 : 0xc274 : 76 aida02 fault 0x5e98 : 0x5ee0 : 72 aida03 fault 0x92d3 : 0x931f : 76 aida04 fault 0x7a92 : 0x7ade : 76 aida05 fault 0xedc0 : 0xedcc : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR DAQ (WS2): everything ok Online monitoring (WS 5): done;
Attachment 1: 2022-02-22_18-45-21eytotal.png

Attachment 2: 2022-02-22_18-44-53extotal.png

Attachment 3: 2022-02-22_18-42-59xytotal.png

Attachment 4: 2022-02-22_18-42-41xyrate.png

Attachment 5: 2022-02-22_18-42-00spect.png

Attachment 6: 2022-02-22_18-41-22correl.png

Attachment 7: 2022-02-22_18-40-55adc.png

Attachment 8: 2022-02-22_18-40-23goodeve.png

Attachment 9: 2022-02-22_18-38-15moretem.png

Attachment 10: 2022-02-22_18-37-35temp.png

Attachment 11: 2022-02-22_18-34-55tapservice.png

Attachment 12: 2022-02-22_18-34-21merger.png

	238	Tue Feb 22 16:09:08 2022	David, Yury	Current status
Merger, Tape server (WS3) checks: DONE, writing ~1 1273kB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, - clock status: Clock status test result: Passed 5, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable - adc calibration: Calibration test result: Passed 5, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module - white rabbit check: Base Current Difference aida01 fault 0xc228 : 0xc272 : 74 aida02 fault 0x5e98 : 0x5edf : 71 aida03 fault 0x92d3 : 0x931d : 74 aida04 fault 0x7a92 : 0x7adc : 74 aida05 fault 0xedc0 : 0xedcc : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR DAQ (WS2): everything ok Online monitoring (WS 5): done
Attachment 1: 2022-02-22_17-13-41tape.png

Attachment 2: 2022-02-22_17-13-17mantab.png

Attachment 3: 2022-02-22_17-11-46temp.png

Attachment 4: 2022-02-22_17-21-39xytotal.png

Attachment 5: 2022-02-22_17-21-09xyrate.png

Attachment 6: 2022-02-22_17-20-33extotl.png

Attachment 7: 2022-02-22_17-20-10eytotl.png

Attachment 8: 2022-02-22_17-19-29spect.png

Attachment 9: 2022-02-22_17-18-46good.png

Attachment 10: 2022-02-22_17-18-24adc.png

Attachment 11: 2022-02-22_17-17-53aidacorrel.png

Attachment 12: 2022-02-22_17-16-50moretempt.png

	237	Tue Feb 22 14:32:04 2022	David, Yury	Current status
Merger, Tape server (WS3) checks: DONE, writing ~1 MB/s, refreshing is fine Leakage current (WS4): 3.48 uA , stable current DAQ (WS2): temperature checked, - clock status: Clock status test result: Passed 5, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable - adc calibration: Calibration test result: Passed 5, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module - white rabbit check: Base Current Difference aida01 fault 0xc228 : 0xc272 : 74 aida02 fault 0x5e98 : 0x5edf : 71 aida03 fault 0x92d3 : 0x931d : 74 aida04 fault 0x7a92 : 0x7adc : 74 aida05 fault 0xedc0 : 0xedcc : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR DAQ (WS2): everything ok Online monitoring (WS 5): done; first shots with something?
Attachment 1: merger15.png

Attachment 2: 2022-02-22_15-35-14-tape.png

Attachment 3: 2022-02-22_15-39-40c.png

Attachment 4: 2022-02-22_15-42-27t.png

Attachment 5: 2022-02-22_15-52-35-goodevents.png

Attachment 6: 2022-02-22_15-57-02adc.png

Attachment 7: 2022-02-22_16-11-21correla.png

Attachment 8: 2022-02-22_16-17-33spect.png

Attachment 9: 2022-02-22_16-26-36xytot.png

Attachment 10: 2022-02-22_16-26-12xyrate.png

Attachment 11: 2022-02-22_16-25-03loweeytot.png

Attachment 12: 2022-02-22_16-24-17-lowexto.png

	236	Tue Feb 22 12:23:23 2022	CB	Slow comparator thresholds lowered - test run
13:20 Stopped run. Slow comp thresh 0x64 -> 0x32 on all FEEs Checkload x2 New run - R55 Restarted Data Spy code Zerod histograms Data rate acceptable. Dead channels seem to come back online Please check for deadtime/idle time once we collect enough stats.
	235	Tue Feb 22 12:01:46 2022	RSS, OF, ML, CB	Beam OFF, Target ON Run 54
01:00 Beam optimisation since 09:25. Target ON and open to the ring YR09xxx ETarget ~1.9e-10 (saturated) Target E4 inlet pressure ~8.8E-9 mbar Dump S3 ~ 6.8E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted. Beam optimization will be done until 3 pm and will be then give for the experiment.
Attachment 1: 12-ex-2022-02-22_13-00-14.png

Attachment 2: 12-ey-2022-02-22_13-00-40.png

Attachment 3: 12-xy-2022-02-22_13-01-10.png

Attachment 4: 12-adc-2022-02-22_12-59-08.png

Attachment 5: 12-good-2022-02-22_12-58-48.png

Attachment 6: 12-temp-2022-02-22_12-57-28.png

Attachment 7: 12-leakage-2022-02-22_12-59-32.png

Attachment 8: 12-spectrum-2022-02-22_12-58-02.png

Attachment 9: 12-correlation-2022-02-22_12-58-25.png

	234	Tue Feb 22 10:30:00 2022	RSS, OF, ML	Beam OFF, Target ON Run 54
11:30 Beam optimisation. No beam since 09:25. Target ON and open to the ring YR09xxx ETarget ~1.9e-10 (saturated) Target E4 inlet pressure ~8.8E-9 mbar Dump S3 ~ 6.8E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted. Beam optimization will be done until 3 pm and will be then give for the experiment.
Attachment 1: 11-ex-2022-02-22_11-30-44.png

Attachment 2: 11-ey-2022-02-22_11-30-12.png

Attachment 3: 11-xy-2022-02-22_11-31-13.png

Attachment 4: 11-adc-2022-02-22_11-27-37.png

Attachment 5: 11-good-2022-02-22_11-28-00.png

Attachment 6: 11-temp-2022-02-22_11-26-26.png

Attachment 7: 11-merger-2022-02-22_11-28-52.png

Attachment 8: 11-leakage-2022-02-22_11-29-09.png

Attachment 9: 11-spectrum-2022-02-22_11-27-12.png

Attachment 10: 11-correlation-2022-02-22_11-28-26.png

	233	Tue Feb 22 10:06:50 2022	RSS, OF, ML	PMT channel
YR00DA1ZB is the channel for PMT rate.
	232	Tue Feb 22 09:10:48 2022	OH	Analysis of R54_14
Results of the fortran analyser programs for R54_14 No timewarps observed in the data No dead time observed either. Lots of idle time but expected with high thresholds and low noise
Attachment 1: R54_14_analyser.txt
* TDR format 3.3.0 analyser - TD - May 2021 * ERROR: READ I/O error: 5002 blocks: 32000 ADC data format: 41363625 ( 7503.5 Hz) Other data format: 220556385 ( 40009.7 Hz) Sample trace data format: 0 ( 0.0 Hz) Undefined format: 0 ( 0.0 Hz) Other data format type: PAUSE: 42 ( 0.0 Hz) RESUME: 42 ( 0.0 Hz) SYNC100: 52536 ( 9.5 Hz) WR48-63: 52536 ( 9.5 Hz) FEE64 disc: 12893198 ( 2338.9 Hz) MBS info: 207558031 ( 37651.8 Hz) Other info: 0 ( 0.0 Hz) ADC data range bit set: 226 ( 0.0 Hz) Timewarps: ADC: 0 ( 0.0 Hz) PAUSE: 0 ( 0.0 Hz) RESUME: 0 ( 0.0 Hz) SYNC100: 0 ( 0.0 Hz) WR48-63: 0 ( 0.0 Hz) FEE64 disc: 0 ( 0.0 Hz) MBS info: 0 ( 0.0 Hz) Undefined: 0 ( 0.0 Hz) Sample trace: 0 ( 0.0 Hz) * Timestamp elapsed time: 5512.571 s FEE elapsed dead time(s) elapsed idle time(s) 0 0.000 5402.413 1 0.056 314.107 2 0.000 657.608 3 0.000 2532.514 4 0.320 0.000 5 0.000 0.000 6 0.000 0.000 7 0.000 0.000 8 0.000 0.000 9 0.000 0.000 10 0.000 0.000 11 0.000 0.000 12 0.000 0.000 13 0.000 0.000 14 0.000 0.000 15 0.000 0.000 16 0.000 0.000 17 0.000 0.000 18 0.000 0.000 19 0.000 0.000 20 0.000 0.000 21 0.000 0.000 22 0.000 0.000 23 0.000 0.000 24 0.000 0.000 25 0.000 0.000 26 0.000 0.000 27 0.000 0.000 28 0.000 0.000 29 0.000 0.000 30 0.000 0.000 31 0.000 0.000 32 0.000 0.000 * Statistics FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 WR48-63 Disc MBS Other HEC Data 0 162443 555 0 0 0 0 37 37 481 0 0 98 1 38970 87977556 0 0 8 8 15077 15077 328 87947058 0 67 2 18930381 14268602 0 0 0 0 8127 8127 12891950 1360398 0 0 3 31507 254 0 0 0 0 4 4 246 0 0 0 4 22200324 118309418 0 0 34 34 29291 29291 193 118250575 0 61 5 0 0 0 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 0 0 0 9 0 0 0 0 0 0 0 0 0 0 0 0 10 0 0 0 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 0 0 0 12 0 0 0 0 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 0 0 0 14 0 0 0 0 0 0 0 0 0 0 0 0 15 0 0 0 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 0 0 0 * Timewarps FEE ADC Pause Resume SYNC100 WR48-63 Disc MBS Undefined Samples 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 9 0 0 0 0 0 0 0 0 0 10 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 12 0 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 14 0 0 0 0 0 0 0 0 0 15 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 20 0 0 0 0 0 0 0 0 0 21 0 0 0 0 0 0 0 0 0 22 0 0 0 0 0 0 0 0 0 23 0 0 0 0 0 0 0 0 0 24 0 0 0 0 0 0 0 0 0 25 0 0 0 0 0 0 0 0 0 26 0 0 0 0 0 0 0 0 0 27 0 0 0 0 0 0 0 0 0 28 0 0 0 0 0 0 0 0 0 29 0 0 0 0 0 0 0 0 0 30 0 0 0 0 0 0 0 0 0 31 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 0 0 0 0 * Program elapsed time: 24.984s ( 1280.801 blocks/s, 80.050 Mb/s)
	231	Tue Feb 22 08:31:25 2022	RSS, OF, ML	Beam OFF, Target ON Run 54
09:30 Beam optimisation. No beam since 09:25. Target ON and open to the ring YR09xxx ETarget ~1.9e-10 (saturated) Target E4 inlet pressure ~8.8E-9 mbar Dump S3 ~ 6.8E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted. FH and ML are optimising the beam.
Attachment 1: 9-ex-2022-02-22_09-29-46.png

Attachment 2: 9-ey-2022-02-22_09-30-12.png

Attachment 3: 9-xy-2022-02-22_09-31-36.png

Attachment 4: 9-adc-2022-02-22_09-28-36.png

Attachment 5: 9-temp-2022-02-22_09-26-47.png

Attachment 6: 9-merger-2022-02-22_09-28-56.png

Attachment 7: 9-leakage-2022-02-22_09-29-14.png

Attachment 8: 9-spectrum-2022-02-22_09-27-11.png

Attachment 9: 9-correlation-2022-02-22_09-27-37.png

Attachment 10: 9-good-events-2022-02-22_09-28-07.png

	230	Tue Feb 22 07:27:28 2022	RSS, OF, ML	Beam ON, Target ON Run 54
08:30 Beam ON ~1.0E7 pps Target ON and open to the ring YR09xxx ETarget ~1.9e-10 (saturated) Target E4 inlet pressure ~8.8E-9 mbar Dump S3 ~ 6.8E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted. FH and ML are optimising the beam.
Attachment 1: 8-merger-2022-02-22_08-30-27.png

Attachment 2: 8-leakage-2022-02-22_08-30-44.png

Attachment 3: 8-adc-data-2022-02-22_08-28-58.png

Attachment 4: 8-spectrum-2022-02-22_08-28-34.png

Attachment 5: 8-xy-total-2022-02-22_08-32-04.png

Attachment 6: 8-ex-energy-2022-02-22_08-31-08.png

Attachment 7: 8-ey-energy-2022-02-22_08-31-32.png

Attachment 8: 8-correlation-2022-02-22_08-30-00.png

Attachment 9: 8-good-events-2022-02-22_08-29-33.png

Attachment 10: 8-temp-2022-02-22_08-28-09.png

	229	Tue Feb 22 06:30:09 2022	RSS, OF	Beam ON, Target ON Run 54
07:30 Beam ON ~8.0E6 pps Target ON and open to the ring YR09xxx ETarget ~1.9e-10 (saturated) Target E4 inlet pressure ~8.8E-9 mbar Dump S3 ~ 6.8E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted. 08:00 The beam is electron cooled by FH and the orbit of the beam is slighty changed.
Attachment 1: temp-2022-02-22_07-36-13.png

Attachment 2: merger-2022-02-22_07-38-15.png

Attachment 3: leakage-2022-02-22_07-38-32.png

Attachment 4: adc-data-2022-02-22_07-37-51.png

Attachment 5: spectrum-2022-02-22_07-36-41.png

Attachment 6: ex-energy-2022-02-22_07-39-00.png

Attachment 7: ey-energy-2022-02-22_07-39-20.png

Attachment 8: xy-energy-2022-02-22_07-40-26.png

Attachment 9: correlation-2022-02-22_07-37-00.png

Attachment 10: good-events-2022-02-22_07-37-21.png

	228	Tue Feb 22 05:47:18 2022	JM, CB, LV, PM, AK	Beam ON, Target ON Run 54 - 2 events at 10MeV!
06:47 Beam ON ~2.0E6 pps, still fluctates between 1e6 and 6e6 (like a step function) Target ON and open to the ring YR09xxx ETarget ~1.8e-10 (saturated) Target E4 inlet pressure 8.0E-9 mbar Dump S3 ~ 6.6E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted.
Attachment 1: Screenshot_from_2022-02-22_06-43-36.png

Attachment 2: Screenshot_from_2022-02-22_06-43-20.png

Attachment 3: Screenshot_from_2022-02-22_06-42-48.png

Attachment 4: Screenshot_from_2022-02-22_06-42-27.png

Attachment 5: Screenshot_from_2022-02-22_06-42-00.png

Attachment 6: Screenshot_from_2022-02-22_06-46-02.png

Attachment 7: Screenshot_from_2022-02-22_06-45-48.png

Attachment 8: Screenshot_from_2022-02-22_06-45-30.png

Attachment 9: Screenshot_from_2022-02-22_06-44-28.png

Attachment 10: Screenshot_from_2022-02-22_06-43-54.png

Attachment 11: Screenshot_from_2022-02-22_06-46-32.png

	227	Tue Feb 22 05:12:38 2022	JM, CB, LV, PM, AK	Beam ON, Target ON Run 54
06:00 Beam ON ~1.5E6 pps, still fluctates between 1e6 and 6e6 (like a step function) Target ON and open to the ring YR09xxx ETarget ~1.8e-10 Target E4 inlet pressure 8.2E-9 mbar Dump S3 ~ 6.5E-10 mbar Nozzle temperature 150 K Run 54 started, monitoring code restarted.
Attachment 1: Screenshot_from_2022-02-22_06-11-18.png

Attachment 2: Screenshot_from_2022-02-22_06-10-59.png

Attachment 3: Screenshot_from_2022-02-22_06-10-22.png

Attachment 4: Screenshot_from_2022-02-22_06-10-09.png

Attachment 5: Screenshot_from_2022-02-22_06-09-54.png

Attachment 6: Screenshot_from_2022-02-22_06-09-31.png

Attachment 7: Screenshot_from_2022-02-22_06-09-12.png

Attachment 8: Screenshot_from_2022-02-22_06-08-58.png

Attachment 9: Screenshot_from_2022-02-22_06-08-22.png

Attachment 10: Screenshot_from_2022-02-22_06-07-57.png

Attachment 11: Screenshot_from_2022-02-22_06-07-46.png

Goto page Previous 1, 2, 3 ... 21, 22, 23 ... 32, 33, 34 Next

ELOG V3.1.4-unknown