AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  DESPEC  ELOG logo
 List  |  New  |  Edit  |  Delete  |  Reply  |  Duplicate  |  Find  |  Config  |  Help 
Message ID: 280     Entry time: Sat Apr 24 15:28:17 2021
Author: TD 
Subject: aida05 crash - 11:08:07 Tuesday 20 April  
From ttyUSB7 system console log

20/09:59:30|get_ASICBlk : Blk=1 : bytes = 793600 : Blk_Status = 00000088 : Offset = 00100000 : Databuffer : 273090556 : 0 => C0017F1D : 1 => 0FAC4BAF
20/09:59:31|Last Data : Databuffer  273884152 : 0 => 80426EF4 : 1 => 0BD70000
20/09:59:31| C03E7F21 : 03FCCB77 | C03D7EF5 : 03FCEE9F | C0047DA3 : 03FCF5A7 | C0207E21 : 03FCF5A7
20/09:59:31| C0317E77 : 03FCF5A7 | C0087E6D : 03FCF66F | C0107E98 : 03FCF66F | C0217ED8 : 03FCF66F
20/09:59:31| C0327E19 : 03FCF66F | C00B7DF0 : 03FCF737 | C0117DD5 : 03FCF737 | C0227F27 : 03FCF737
20/09:59:31| C03C7F23 : 03FCF737 | C0137EF9 : 03FCF7FF | C0297EB7 : 03FCF7FF | C03E7EC7 : 03FCF7FF
20/09:59:31| C0167DFE : 03FCF8C7 | C02A7FC3 : 03FCF8C7 | C03F7E82 : 03FCF8C7 | C01B7E91 : 03FCF98F
20/09:59:31| C02F7E8F : 03FCF98F | C01D7DC4 : 03FCFA57 | C01E7D40 : 03FCFB1F | 80426EF3 : 03FD0000
20/09:59:32| 8050023F : 03FD0000 | C03D7F1A : 03FD303F | 80426EF3 : 03FD4000 | 8050023F : 03FD4000
20/09:59:32| C0317F2F : 03FD5047 | C0047DF2 : 03FD510F | C01B7EAD : 03FD54F7 | C03D7F09 : 03FD5D8F
20/09:59:32|SIGPIPE ERROR - Error in xfer ASIC procedures: location=0
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:37|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:39|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:40|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_bxaida: release:
20/10:00:41|loAIDAMEM: aidamem_release:
20/10:00:41|ck busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|xfer_block busy
20/10:00:41|SIGSEGV ERROR - Error in xfer ASIC procedures: location=0
20/10:00:41|xfer_block busy
20/10:00:41|do_GetState returned z=0 and 1
20/10:01:27|executing generic doStop
20/10:02:41|WriteRegister failed: Name=SigTask.EXEC.Usr1; Data=0; Code= POSIX ESRCH {no such process}; Info= sending signal SIGUSR1 to process 375 failed: no such 
process
20/10:02:42|StopC:
20/10:02:42|do_GetState returned z=0 and 6
20/10:02:47|do_GetState returned z=0 and 6
20/10:02:58|do_GetState returned z=0 and 6
20/10:03:10|do_GetState returned z=0 and 6
20/10:03:21|do_GetState returned z=0 and 6
20/10:03:33|do_GetState returned z=0 and 6
20/10:03:44|do_GetState returned z=0 and 6
20/10:03:56|do_GetState returned z=0 and 6
20/10:04:07|do_GetState returned z=0 and 6
20/10:04:19|do_GetState returned z=0 and 6
20/10:04:30|do_GetState returned z=0 and 6
20/10:04:42|do_GetState returned z=0 and 6
20/10:04:53|do_GetState returned z=0 and 6
20/10:05:04|do_GetState returned z=0 and 6
20/10:05:16|do_GetState returned z=0 and 6
20/10:05:27|do_GetState returned z=0 and 6
20/10:05:39|do_GetState returned z=0 and 6
20/10:05:50|do_GetState returned z=0 and 6
20/10:06:02|do_GetState returned z=0 and 6
20/10:06:12|executing generic doReset
20/10:06:21|WriteRegister failed: Name=SigTask.EXEC.Usr1; Data=0; Code= POSIX ESRCH {no such process}; Info= sending signal SIGUSR1 to process 375 failed: no such 
process
20/10:06:22|ResetC:
20/10:06:22|do_GetState returned z=0 and 6
20/10:06:22|do_GetState returned z=0 and 6
20/10:06:34|do_GetState returned z=0 and 6
20/10:06:45|do_GetState returned z=0 and 6
20/10:06:57|do_GetState returned z=0 and 6
INIT: Switching to runlevel: 6
INStarting killall:  Unmounting NFS filesystems:  umount: /MIDAS: not mounted
20/10:07:15|[  OK  ]
20/10:07:15|Stopping rpcbind: [  OK  ]
20/10:07:17|Shutting down kernel logger: [  OK  ]
20/10:07:19|Shutting down system logger: [  OK  ]
20/10:07:19|Stopping xinetd: [  OK  ]
20/10:07:19|[  OK  ]
20/10:07:19|Sending all processes the TERM signal...
20/10:07:20|xaida: release:
20/10:07:20|Sending all processes the KILL signal...
20/10:07:25|Saving random seed:
20/10:07:25|Syncing hardware clock to system time xaida: open:
20/10:07:25|xaida: release:
20/10:07:25|xaida: open:
20/10:07:25|xaida: ioctl: called with command 536899587
20/10:07:25|xaida: ioctl: called with command 1076129801
20/10:07:25|RTCxaida: release:
20/10:07:25|_RD_TIME: Inappropriate ioctl for device
20/10:07:25|ioctl() to /dev/rtc to read the time failed.
20/10:07:25|
20/10:07:25|Please stand by while rebooting the system...
Sj�5õÅ07:27|Restarting system.
20/10:07:29|ÉU�×®­Ë
                   R�   $T,W¤']Z�¥anuary 2017
Flash base address=FC000000
Set Flash to ASync Mode
XST_SUCCESS|
Finished copying zImage to RAM
20/10:07:29|
Found 0 errors checking kernel image
20/10:07:30|VHDL version number 0X03350706
Based on AIDA Bootloader version number 1.2.0 -- 16th August 2012
Starting LMK 3200 setup
20/10:07:30|
Setting LMK03200 to standard clock settings -- External Clock 23Nov15
.... SPI Base Address=0x81400000
clk_control_reg=0x4
20/10:07:31|Next step is SPIconfig
Control 32(0x81400000)=0x180
SlaveSel(0x81400000)=0x3
Ctrl(0x81400000)=0xE6
Ctrl(0x81400000)=0x86
20/10:07:31|SPIconfig done now to set up the LMK3200 registers
20/10:07:31|LMK #0 : regInit[0]=0x80000000
20/10:07:31|LMK #0 : regInit[1]=0x10070600
20/10:07:31|LMK #0 : regInit[2]=0x60601
20/10:07:31|LMK #0 : regInit[3]=0x60602
20/10:07:31|LMK #0 : regInit[4]=0x60603
20/10:07:31|LMK #0 : regInit[5]=0x70624
20/10:07:31|LMK #0 : regInit[6]=0x70605
20/10:07:31|LMK #0 : regInit[7]=0x70606
20/10:07:31|LMK #0 : regInit[8]=0x70627
20/10:07:31|LMK #0 : regInit[9]=0x10000908
20/10:07:31|LMK #0 : regInit[10]=0xA0022A09
20/10:07:31|LMK #0 : regInit[11]=0x82800B
20/10:07:31|LMK #0 : regInit[12]=0x28C800D
20/10:07:31|LMK #0 : regInit[13]=0x830020E
20/10:07:31|LMK #0 : regInit[14]=0xC800180F
Calibrate completed at 943 counts
Setting Clock Control =0x0000000B, to set GOE and sync bit
Ctrl @ SPIstop (0x81400000)=0x186
Timeout waiting for Lock detect Stage 2 (Zero Delay), PWR_DWN=0x00000004
20/10:07:32|
Finished Clock setup LMK03200
completed LMK 3200 setup
Loaded all four ASICs with default settings
Setting the ADCs into calibration mode
20/10:07:32|
Control 32(0x81400400)=0x180
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86
Init : Config of AD9252 SPI ok
20/10:07:32|
Ctrl @ SPIstop (0x81400400)=0x186ADCs initialised
Cal DCMs not locked
ADC calibrate failed
Jumping to kernel simpleboot...
20/10:07:32|
zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0)
Allocating 0x3b78cc bytes for kernel ...
gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes
20/10:07:35|
Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Finalizing device tree... flat tree at 0xbd1300
Probing IIC bus for MAC... MAC address = 0xd8 0x80 0x39 0x41 0xd7 0xcc
20/10:07:42|Using Xilinx Virtex440 machine description
20/10:07:42|Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011
20/10:07:42|Zone PFN ranges:
20/10:07:42|  DMA      0x00000000 -> 0x00007000
20/10:07:42|  Normal   0x00007000 -> 0x00007000
20/10:07:42|Movable zone start PFN for each node
20/10:07:42|early_node_map[1] active PFN ranges
20/10:07:43|    0: 0x00000000 -> 0x00007000
20/10:07:43|MMU: Allocated 1088 bytes of context maps for 255 contexts
20/10:07:43|Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 28448
20/10:07:43|Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
20/10:07:43|PID hash table entries: 512 (order: 9, 2048 bytes)
20/10:07:43|Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
20/10:07:43|Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
20/10:07:43|Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init)
20/10:07:43|Kernel virtual memory layout:
20/10:07:43|  * 0xffffe000..0xfffff000  : fixmap
20/10:07:43|  * 0xfde00000..0xfe000000  : consistent mem
20/10:07:43|  * 0xfde00000..0xfde00000  : early ioremap
20/10:07:43|  * 0xd1000000..0xfde00000  : vmalloc & ioremap
20/10:07:43|NR_IRQS:512
20/10:07:43|clocksource: timebase mult[a00000] shift[22] registered
20/10:07:43|Console: colour dummy device 80x25
20/10:07:43|Mount-cache hash table entries: 512
20/10:07:43|NET: Registered protocol family 16
20/10:07:43|PCI: Probing PCI hardware
20/10:07:43|bio: create slab <bio-0> at 0
20/10:07:44|NET: Registered protocol family 2
20/10:07:44|IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
20/10:07:44|TCP established hash table entries: 4096 (order: 3, 32768 bytes)
20/10:07:44|TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
20/10:07:44|TCP: Hash tables configured (established 4096 bind 4096)
20/10:07:44|TCP reno registered
20/10:07:44|NET: Registered protocol family 1
20/10:07:44|ROMFS MTD (C) 2007 Red Hat, Inc.
20/10:07:44|msgmni has been set to 214
20/10:07:44|io scheduler noop registered
20/10:07:44|io scheduler anticipatory registered
20/10:07:44|io scheduler deadline registered
20/10:07:44|io scheduler cfq registered (default)
20/10:07:44|Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
20/10:07:44|83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
20/10:07:44|console [ttyS0] enabled
20/10:07:44|brd: module loaded
20/10:07:44|loop: module loaded
20/10:07:44|Device Tree Probing 'ethernet'
20/10:07:44|xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:d7:cc
20/10:07:44|xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
20/10:07:44|XLlTemac: DCR address: 0x80
20/10:07:44|XLlTemac: buffer descriptor size: 32768 (0x8000)
20/10:07:45|XLlTemac: Allocating DMA descriptors with kmalloc
20/10:07:45|XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
20/10:07:45|XTemac: PHY detected at address 7.
20/10:07:45|xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17
20/10:07:45|fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
20/10:07:45| Intel/Sharp Extended Query Table at 0x010A
20/10:07:45| Intel/Sharp Extended Query Table at 0x010A
20/10:07:45| Intel/Sharp Extended Query Table at 0x010A
20/10:07:45| Intel/Sharp Extended Query Table at 0x010A
20/10:07:45| Intel/Sharp Extended Query Table at 0x010A
20/10:07:45| Intel/Sharp Extended Query Table at 0x010A
20/10:07:45|Using buffer write method
20/10:07:45|cfi_cmdset_0001: Erase suspend on write enabled
20/10:07:45|cmdlinepart partition parsing not available
20/10:07:45|RedBoot partition parsing not available
20/10:07:45|Creating 5 MTD partitions on "fc000000.flash":
20/10:07:45|0x000000000000-0x000000500000 : "golden_firmware"
20/10:07:45|0x000000500000-0x000000800000 : "golden_kernel"
20/10:07:45|0x000000800000-0x000000d00000 : "user_firmware"
20/10:07:46|0x000000d00000-0x000000fe0000 : "user_kernel"
20/10:07:46|0x000000fe0000-0x000001000000 : "env_variables"
20/10:07:46|xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
20/10:07:46|SPI: XIlinx spi: bus number now 32766
20/10:07:46|xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
20/10:07:46|SPI: XIlinx spi: bus number now 32765
20/10:07:46|mice: PS/2 mouse device common for all mice
20/10:07:46|Device Tree Probing 'i2c'
20/10:07:46| #0 at 0x81600000 mapped to 0xD1030000, irq=22
20/10:07:46|at24 0-0050: 1024 byte 24c08 EEPROM (writable)
20/10:07:46|TCP cubic registered
20/10:07:46|NET: Registered protocol family 17
20/10:07:46|RPC: Registered udp transport module.
20/10:07:46|RPC: Registered tcp transport module.
20/10:07:46|eth0: XLlTemac: Options: 0x3fa
20/10:07:47|eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
20/10:07:47|eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
20/10:07:47|eth0: XLlTemac: speed set to 1000Mb/s
20/10:07:49|eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
20/10:07:49|eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
20/10:07:49|Sending DHCP requests ., OK
20/10:07:50|IP-Config: Got DHCP answer from 192.168.11.99, my address is 192.168.11.5
20/10:07:50|IP-Config: Complete:
20/10:07:50|     device=eth0, addr=192.168.11.5, mask=255.255.255.0, gw=255.255.255.255,
20/10:07:50|     host=aida05, domain=dl.ac.uk, nis-domain=nuclear.physics,
20/10:07:50|     bootserver=192.168.11.99, rootserver=192.168.11.99, rootpath=/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida05
20/10:07:50|Looking up port of RPC 100003/2 on 192.168.11.99
20/10:07:51|Looking up port of RPC 100005/1 on 192.168.11.99
20/10:07:51|VFS: Mounted root (nfs filesystem) on device 0:12.
20/10:07:51|Freeing unused kernel memory: 168k init
INIT: version 2.86 booting
20/10:07:51|Starting sysinit...
20/10:07:51|            Welcome to DENX & STFC Daresbury Embedded Linux Environment
20/10:07:52|            Press 'I' to enter interactive startup.
20/10:07:52|Setting clock  (utc): Tue Apr 20 10:07:52 BST 2021 [  OK  ]
20/10:07:53|Building the cache [  OK  ]
20/10:07:53|Setting hostname aida05:  [  OK  ]
20/10:07:54|Mounting local filesystems:  [  OK  ]
20/10:07:55|Enabling /etc/fstab swaps:  [  OK  ]
20/10:07:57|Finishing sysinit...
INIT: Entering runlevel: 3
20/10:08:00|Entering non-interactive startup
20/10:08:01|FATAL: Module ipv6 not found.
20/10:08:02|Bringing up loopback interface:  [  OK  ]
20/10:08:04|FATAL: Module ipv6 not found.
20/10:08:04|Starting system logger: [  OK  ]
20/10:08:05|Starting kernel logger: [  OK  ]
20/10:08:05|Starting rpcbind: [  OK  ]
20/10:08:06|Mounting NFS filesystems:  [  OK  ]
20/10:08:07|Mounting other filesystems:  [  OK  ]
20/10:08:07|Starting xinetd: [  OK  ]
20/10:08:08|Starting midas:  Starting MIDAS Data Acquisition for aida05
20/10:08:08|xaida: device parameters: base=0x81000000 size=0x200000
20/10:08:14|Trying to free nonexistent resource <0000000081000000-00000000811fffff>
20/10:08:14|xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
20/10:08:14|xaida: driver assigned major number 254
20/10:08:14|Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
20/10:08:20|AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
20/10:08:20|AIDAMEM: aidamem: driver assigned major number 253
20/10:08:20|System identified is CPU ppc; Platform is unix; OS is Linux and Version is 2.6.31
20/10:08:26|Environment selected is CPU ppc; Platform unix; OS Linux and Operating System linux-ppc_4xx
20/10:08:27|MIDASBASE = /MIDAS and MIDAS_LIBRARY = /MIDAS/TclHttpd/linux-ppc_4xx
20/10:08:27|PATH = /MIDAS/bin_linux-ppc_4xx:/MIDAS/TclHttpd/linux-ppc_4xx:/MIDAS/linux-ppc_4xx/bin:/MIDAS/linux-ppc_4xx/bin:/sbin:/usr/sbin:/bin:/usr/bin
20/10:08:27|Computer Name = aida05; Temp Directory = /tmp/tcl356
20/10:08:30|package limit is not available: can't find package limit
20/10:08:33|Running with default file descriptor limit
20/10:08:33|package setuid is not available: can't find package setuid
20/10:08:35|Running as user 0 group 0
20/10:08:35|
20/10:08:36|AIDA Data Acquisition Program Release 9_10.Apr  3 2019_11:34:31 starting
ELOG V3.1.4-unknown