Extra FEE information:

HV braid (0 V) goes into FEE10 (beam left) with LK1 jumper
HV core (-160 V) goes into FEE09 (top)

Could be related to noise in FEE09?
Both these FEEs have higher rates too

Other setup information:
According to the switch in S4, the AIDA workstation is only connected via 100Mbps rather than 1Gbps. (Fig 1)

Plastic is inside the snout, but is not yet connected to the electronics yet
Figures 2-4 Show the DSSD & Plastic in the Snout. Plastic is far upstream solely to ensure plenty of ribbon cable