01:37 Over the past hour the degrader settings have been checked by impinging 209Pb onto the detectors.
      That is now complete.
      Will find optimum thresholds for n+n side and then leave DAQ running with n+n at optimum and p+n at 0xc

      R16 slow comp 0x19 (250keV) 2 and 4 low deadtime 6 and 8 high deadtime. - attachment1
      Will lower 2 and 4 to 200 and raise 6 and 8 to 300

      R17 2 good, 4 shakey 6 and 8 poor - attachment 2

      R18 2 and 4 at 220 and 6 and 7 at 350
      2 and 8 low deadtime, 4 and 6 could be better. - attachment 3


      Will run with p+n at 0xc 2+4 at 0x16 and 6 and 8 at 0x23
      Statistics at this rate - attachment 4




02:18 Statistics - attachment 7
      Temperatures - attachment 6
      Bias & leakage current - attachment 5

      Clock Status - OK
      White Rabbit - OK
      The other 3 checks currently aren't working




04:11 Statistics - attachment 10
      Temperatures - attachment 9
      Bias & leakage current - attachment 8

      Clock Status - OK
      White Rabbit - OK




06:05 Statistics - attachment 13
      Temperatures - attachment 12
      Bias & leakage current - attachment 11

      Clock Status - OK
      White Rabbit - OK