10.57 DSSSD bias & leakage current OK - attachment 1

      FEE64 temps OK - attachment 2

      ADC, MBS correlation scaler data item stats - attachments 3-4
       ADC 9x < 20k, max 243k aida08

      ASIC settings aida01 & aida02 - attachments 5-6

      ALL system wide checks OK *except* attachments 7-8

      WR timestamps OK - attachment 9

      BNC PB-5 settings - attachment 10

      per FEE64 Rate spectra - attachment 11

      per p+n FEE64 1.8.L spectra - attachment 12
       aida09 pulser peak width 57 ch FWHM

      per FEE64 1.8.H spectra - attachments 13-14

      per FEE64 1.8.W spectra - 20us FSR - attachments 15-16
       no p+n FEE64 wavefroms - reason unknown

      Merger, TapeServer etc - attachments 17-18

11.25 Lost control of aida-gsi window system 
      All command terminals lost, could not start new command terminals

      aida-gsi restart

      FEE64 power cycle
      DSSSD bias cycle

      Note file manager, calculator apps now working as expected

12.11 DAQ starts 
      data file S181/R6

      ASIC settings 2024Apr19-15.22.49

      BNC PB-5 Pulser
      Amplitude 10.0V
      Attenuation x10
      Fall time 1ms
      Frequency 2Hz
      Polarity + (connected to test + signal daisy chain to all p+n FEE64s)

      Sync ASIC clocks OK
      All system wide checks OK *except* aida02 FPGA/WR decoder - attachments 19-20

      per FEE64 1.8.W spectra - 20us FSR - attachments 21-22

12.29 analysis data file S181/R6_9 - attachment 23
      max dead time c. 2% (aida08)

15:34 For some reason the AIDA MBS wasn't connecting to the time sorter (or a check stream) [NH]
      Try to reset the AIDA MBS 
      Due to confusion the AIDA Merger was rebooted too, while the DAQ was running, this broke all the FEEs -> Powecycled
      Synced ASIC clocks, fixed all waveforms
      Masked all discriminators
      All looks ok -> Sending back to MBS and back in DESPEC DAQ