| |
ID |
Date |
Author |
Subject |
Text |
 |
|
|
747
|
Fri Jan 23 08:00:42 2026 |
MA, BA | Wed 12 May 00:00-08:00 |
|
|
|
|
746
|
Wed Jan 7 02:21:13 2026 |
BA, AA | Saturday 14 May |
|
|
|
|
745
|
Wed Nov 19 10:28:24 2025 |
JEL, JB | Analysis of AIDA from S100 experiment by JEL | Analysis done by JEL of the AIDA daq with
his own time-stitcher -- not the standard
one used by DESPEC. |
|
|
|
744
|
Thu Nov 13 10:14:50 2025 |
JB, MP | Noise conditions after removal of bPlast cabling | JB has removed unnecessary cables and items
from the snout and platform:
- the bPlast cables and booster |
11x |
|
|
743
|
Fri Nov 7 12:30:30 2025 |
JB, GB, MP | Pulser walkthrough for source tests. | 13:30 We are going to do the pulser walkthrough
for the the source tests.
|
|
|
|
742
|
Fri Nov 7 10:47:29 2025 |
MP | 207Bi source test - data taking | DAQ stopped at ~17.30 due to anydesk failure
|
|
|
|
741
|
Thu Nov 6 12:58:09 2025 |
NH | 207Bi source test - data taking | Restart AIDA
aida06 took three attempts to boot today |
6x |
|
|
740
|
Wed Nov 5 13:23:38 2025 |
JB, MP | 207Bi source test - FWHM tests | 14:10 started up the DAQ. HV and TEMPS OK.
Peak threshold with 1V pulser measured at |
8x |
|
|
739
|
Tue Nov 4 17:29:28 2025 |
MP | Bi207 source data, 700keV | Anydesk has crashed. I am not able to set
it up again. I switch off bias and fees
|
|
|
|
738
|
Tue Nov 4 16:34:47 2025 |
MP, NH | Bi207 source data, 700keV | Some FEES were not acquiring data for some
reason we could not understand. We lowered
the thresholds to 200 keV, then rose them |
|
|
|
737
|
Tue Nov 4 14:57:19 2025 |
MP | Bi207 source data, 700keV | - Bias and basic checks: the pulser FWHM
appears to be ~170, which is the same we
have obtained at the end of last week. |
|
|
|
736
|
Thu Oct 30 16:43:36 2025 |
MP, NH | Setup and data taking with 207Bi | Data taking and DAQ stopped now (17.40)
|
|