 Tue May 21 10:54:24 2019, A. Algora, Background
|
Start: 18:55
Stop: 20:01
Lmd: Background_201905211855_068.dlt |
|
Fri May 31 09:49:08 2019, A. Algora, Backgroun, beam on
|
Start: 17:49
Stop: 22:11
Root: 201905312211_background_AIDA_in.root |
|
Sat May 25 07:04:52 2019, A. Algora, Ancilliary card used channels until now
|
For the moment there are three channels connected.
Channel 5 is AIDA plastic,
Channel 10 is the anode of the Ref detector |
Wed Jun 19 05:10:15 2019, Alvaro, Aida plastic - gain change 
|
TAC AIDAPL - CryA changed
After increasing the gain, x2 peaks in TAC |
|
Wed May 29 09:08:11 2019, A. Algora, AIDA plastic setting changed
|
AIDA plastic changed.
HV was at 1000 V, it was changed to 1300 V
Coarse gain was changed to x5, Fg remains as it was. |
|
Sat Jun 8 04:22:39 2019, Jorge Alvaro, AIDA TAS correlation with 137Cs
|
Files at mars /home/briken/190607AidaTasTest137Cs
For this experiment TAS Signal is stored |
|
Fri Jun 14 16:22:25 2019, AT, OH, JA, CG, TD, AIDA Sync
|
Problem with the sync checker appeared AIDA was not its notmal 14us out from DTAS.
Check with source shows we are in sync still
|
|
Mon May 27 07:18:26 2019, A. Algora, AIDA Plastik
|
Nishimura san found the module used for the AIDA plastik in the last BRIKEN run. We put it instead of the TFA. It was kept in the same
setting conditions as in the earlier experiment.
AIDA plastic module configuration (Ortec 671 Amplifier) |
|
Fri May 24 10:57:37 2019, A. Algora, 60Co, AIDA out, possitioned 5 mm deeper
|
Start: 18:58
Stop: 20:20
Lmd: 60Co_source_201905241858_095.dlt ...60Co_source_201905241858_106.dlt |
|
Sat May 25 02:11:09 2019, A. Algora, 60Co source, red box, no sources around, No AIDA
|
Start: 10:27
Stop: 11:31
Root: 201905251131_60co.root |
|
Mon May 20 10:02:43 2019, A. Algora, 60Co again, with better threshold settings
|
Start: 18:06
Stop: 20:20
Rates: 14 kHz (Dynodes) 12.7 kHz (anodes) |
|
Wed May 22 09:01:43 2019, A. Algora, 60Co (source CD 395) with AIDA in
|
Start: 17:00
Stop: 17:40
Lmd: Co60_source_AIDA_201905221700_072.dlt ..Co60_source_AIDA_201905221700_074.dlt |
|
Tue May 21 07:07:36 2019, A. Algora, 22Na, source 700
|
Start: 15:08
Stop: 15:42
Rates: 19 kHz (Dynodes), 16 kHz (anodes) |
|
Tue May 21 08:55:20 2019, A. Algora, 152Eu, source ID 272
|
Start: 16:56
Stop: 17:46
Rates: 12.6 kHz (dynodes), 12 kHz (anodes) |
|
Fri May 24 09:43:49 2019, A. Algora, 137Cs source, AIDA out, to check assymetry
|
Start: 17:43
Stop: 18:51
Root: 201905241851_137Cs.root |
|
Thu May 23 02:48:29 2019, A. Algora, 137Cs short run with AIDA in
|
Start: 10:48
Stop: 10:58
Root: 201905231058_137Cs_with_Aida.root |
|
Mon May 27 07:15:06 2019, A. Algora, 137Cs run, AIDA out, source in the center
|
Start: 15:15
Stop: 15:31
Lmd: 137Cs_source_201905271514_187.dlt .. 137Cs_source_201905271514_195.dlt |
|
Wed May 22 06:31:54 2019, A. Algora, 137Cs quick test of alignment
|
Start: 14:32
Stop: 14:37
Source: 137Cs |
|
Wed May 15 11:50:04 2019, Algora, Nacher, 137Cs listmode, and rootfile
|
137Cs source in the center of the DTAS, with the IFIC holder
list mode files: Cs137_Source_20190515_000.dlt to Cs137_Source_20190515_005.dlt
Root file: 201905151942_137Cs.root |
|
Wed May 22 07:15:00 2019, A. Algora, 137Cs (4763) with AIDA in
|
Start: 15:15
Stop: 15:50
Lmd: Cs137_source_AIDA_201905221515_069.dlt ..Cs137_source_AIDA_201905221515_070.dlt |