Header: CH2 target in, Laser #2 off, 4.0 MeV/u
Ender: Stopped run to modify DAQ trigger 
====================================================
Run number			: 97
Date				: 11 / 11 / 2017
Start time			: 18:48
Stop time			: 18.55
Trigger rate (MIDAS)	        : 
Blocks written		        : 1
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Run Scalars (approx rates)
0- Ungated                      : 0
1- Gated                        : 0
2- dE                           : 142k
3- E                            : 60
4- HI                           : 43
5- Pulser                       : 24
6- Clock			: 976
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Beam energy (MeV/u)		: 4.0 MeV/u nominal
Beam intensity (epA)	        : 0.05 to 0.06
Target				: CH_2 30+25
Ladder position	(mm)	        : 67.26
HI Degrader foil (um)		: 10 um Al
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
del_E voltage (V)		: -40
del_E leakage (uA)		: 0.67
E voltage (V)			: -350
E leakage (uA)		        : 2.10
E_hi voltage (V)		: -14
E_hi leakage (uA)		: 2.67
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
PA power (Up, positive)	(A)	: 1.5
PA power (Up, negative) (A)     : .55
PA power (Down, positive) (A)	: .25
PA power (Down, negative) (A)   : .8
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Pressure (IMG1)	(mbar)	        : 6.9 x 10^-6
Pressure (old gauge) (mbar)     : 1.95 x 10^-5
Pressure (SEC)	(mbar)         	: 3.9 x 10^-6
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Temp (Chiller)	deg	        : -10.1
Temp (chamber)	deg	        : 5.8
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Comments: Increased pulser rate to 250 Hz, to flush the previous buffer in the Tape Server.  
See https://elog.ph.ed.ac.uk/ISOLDE/106 with "0 blocks written"
====================================================