The attached firmware file, FEE_GF_Feb16_18.bin, should be saved to /MIDAS/Aida and the FlashPgm.csh file edited
to load "FEE_GF_Feb16_18.bin"

Use the Run Control Expert command to update the firmware on all the FEE64s.

Power cycle the FEE64s to load the new firmware.

Make a backup copy of the files in the directory /MIDAS/TclHttpd/Html/AIDA/DISC.

Unzip the files from DISC_25May16.zip and copy them into /MIDAS/TclHttpd/Html/AIDA/DISC to replace the existing
ones.

Make a backup copy of the file /MIDAS/TclHttpd/Html/AIDA/LOCAL.tml

Unzip the file from LOCAL_tml_25May16.zip and copy into /MIDAS/TclHttpd/Html/AIDA/LOCAL to replace the existing
file.

'RESET' and browser refresh the two updated control windows to load the new software.
-----------------------------------------------------

To use the Multiplicity Trigger:-
In the Local Controls select option 5 for the Trigger.

In the Discriminator window.

Set the 'Upper Limit'
Set the 'Lower Limit' ( always greater than 0 ..... or the Trigger will always be present )
Set the 'Time window'. The number of 10nS clocks. So 4 => 40nS. Register is 0 to 255.

-----------------------------------------------------

These registers are not in the Save/Restore set yet.

Tested on the T9 system using the pulser and setting/clearing Mask bits.

Please let me know how this works for you.