Done. Awaiting test. See attachments 1-2.

> The attached firmware file, FEE_GF_Feb16_18.bin, should be saved to /MIDAS/Aida and the FlashPgm.csh file edited
> to load "FEE_GF_Feb16_18.bin"
> 
> Use the Run Control Expert command to update the firmware on all the FEE64s.
> 
> Power cycle the FEE64s to load the new firmware.
> 
> Make a backup copy of the files in the directory /MIDAS/TclHttpd/Html/AIDA/DISC.
> 
> Unzip the files from DISC_25May16.zip and copy them into /MIDAS/TclHttpd/Html/AIDA/DISC to replace the existing
> ones.
> 
> Make a backup copy of the file /MIDAS/TclHttpd/Html/AIDA/LOCAL.tml
> 
> Unzip the file from LOCAL_tml_25May16.zip and copy into /MIDAS/TclHttpd/Html/AIDA/LOCAL to replace the existing
> file.
> 
> 'RESET' and browser refresh the two updated control windows to load the new software.
> -----------------------------------------------------
> 
> To use the Multiplicity Trigger:-
> In the Local Controls select option 5 for the Trigger.
> 
> In the Discriminator window.
> 
> Set the 'Upper Limit'
> Set the 'Lower Limit' ( always greater than 0 ..... or the Trigger will always be present )
> Set the 'Time window'. The number of 10nS clocks. So 4 => 40nS. Register is 0 to 255.
> 
> -----------------------------------------------------
> 
> These registers are not in the Save/Restore set yet.
> 
> Tested on the T9 system using the pulser and setting/clearing Mask bits.
> 
> Please let me know how this works for you.