11.40 R8 continues

      B2F/FF temp +25 deg C, d.p. +14 deg C, RH 51%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3
      System-wide checks OK - see attachments 4-9

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics - see attachments
10-16

      Some error messages observed for merger - see attachment 17-18
      All related to Q5 (nnaida6)

      Analysis of R8_231 shows data synchronised 

18.07 R8 stops

      At end of run (file R8_310) BNC PB-4 pulser ref switch INT -> EXT to check for possible skew in data
synchronisation

      Analysis of R8_310 shows no evidence of skew, i.e. all FEE64s are observed to stop producing pulser events
at same time

19.21 R9 starts

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      ASIC Control -> Check ASIC Control required after DAQ GO

      BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      System-wide checks OK - see attachments 19-24
      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics x2 - see attachments
25-32