10.11 R9 continues

      ASIC settings 2016Aug20-15.34.53
      Discriminator masks -> 0x0
      From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5

      BNC PB-4 Pulser
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns tau_d 50us 
      - polarity
      INT ref, delay MIN, tail pulse
      External (random) trigger from EG&G Ortec 462 Start output (Range 81.92us) - frequency c. 120Hz

      B2F/F11 temp +24.8 deg C, d.p. +12.9 deg C, RH 46.8%

      DSSSD bias/leakage current OK - see attachments 1-2
      FEE64 temperatures OK - see attachment 3

      Some error messages observed for merger - see attachment 4-12
      All related to Q5 (nnaida6)

      System-wide checks OK - see attachments 13-18

      AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6, nnaida5 & nnaida20
statistics - see attachments
19-28

      Analysis of R9_561 shows data synchronised - see attachmen

      FEE # versus timestamp (0.1ms / channel)
      Note nnaida19 not currently configured

10.49 R9 stops