09.13 DAQ run R3 ends OK (final file R3_9)
      
      ASIC settings 2017Mar27-16.12.39
      slow comparator 100 (dec)
      LEC/MEC fast comparator 255 (dec)
      BNC PB-4 pulser OFF

09.20 Biases & leakage currents OK - see attachments 1 & 2
      Ambient temperature +23.8 deg C, d.p. -3.5 deg C, RH 15.7%
      Julabo FL11006 set point +20 deg C actual +20.0 deg C

09.32 FEE64 temperatures OK - see attachment 3

09.39 System-wide checks OK except
      ADC calibration fails nnaida21 & 23
      SYNC errors not counted since baseline
      SYNC pulses received
      see attachments 4-8

13.36 PE16/R1

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate ~250Hz 
      delay MIN, tail pulse

      ASIC settings 2017Mar27-16.12.39

      see attachment 9

13.52 PE16/R2

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 10,000 - 2,000 @ 2,000 step

      see attachment 10

14.03 PE16/R3

      Pulser walkthough 

      BNC PB-4 settings 
      Amplitude 2,000 - 8,000 @ 2,000 step, 10,000 - 50,000 @ 10,000 step

      see attachment 11

20.30 System-wide checks
      All OK *except* clock status - nnaida1 global clocks failed 6 - see attachment 12

20.35 PE16/R4

      Background

      BNC PB-4 OFF

      ASIC settings 2017Mar27-16.12.39

      MACB master mode 5 (external 50MHz clock from Tektronix AFG3102C)

20.40 Biases & leakage currents OK - see attachments 13 & 14
      Ambient temperature +23.6 deg C, d.p. -3.2 deg C, RH 16.6%
      Julabo FL11006 set point +20 deg C actual +20.0 deg C
      FEE64 temperatures OK - see attachment 15

20.50 PE16/R4 ends OK