To do (roughly in order):

•  Move shipped boxes down from Gabor's office to the experimental area. Check contents. Should include:
  • 3x 3Tb HDD
  • NIM floating HV supply
  • 2x Si detector boxes, containing MSL type BB18 detectors 3131-9 + 3131-11 and 3058-9 + 3058-25
  • flex circuit tester
  • misc items including Al plates, grub nuts etc.
• Put everything back into working positions @ F11.
• Put computer table back to normal. Turn on/check aidas1.
• Reconnect power to chiller. Check water levels, fill if needed. Turn on and check for leaks.
• Install PSUs, USB and network switches in new AIDA base.
• Set up Raspberry Pi.
• Check modified PSU voltages.
• Reconnect FEE64s (power/network/HDMI). Label everything.
• Power on. Check
  • Basic pusler test to check function and server. Confirm FWHMs are as expected.

Late Monday or on Tuesday:

• Talk to Shunji re. AIDA/BRIKEN + EURICA setup requirements.
• Install Al/Si accordingly.
• Complete AIDA build with snout, kaptons etc.
• Acquire sources (Am/Bi) for source test ------> Speak to Gabor first thing about this.