11.11 DAQ found stopped
      Most recent file May2017/R11_245 (last accessed 06:09)

      Detector biases & leakage currents OK - see attachments 1 & 2
      FEE64 Temperatures OK - see attachment 3
      'good events' statistics zero - see attachment 4
      Merger and Tapeserver terminal server windows are gone - see attachment 5

      *all* system wide checks OK

      No relevant system log messages (/var/log/messages) c. 06.00

      DAQ STOP attempt #1  did not stop
                       #2  timeout nnaida1, nnaida2-24 did not stop
                       #3  timeout nnaida1, nnaida2-24 did not stop

      Restart, configure and setup/go merger terminal server
      Restart TapeServer terminal server

      DAQ STOP attempt #3 all stop OK

11.24 Analysis of data file R11_245 - see attachment 6
      dead-time/idle-time < 0.5%
      AIDA SYNC100 variations ~160/78000

11.34 E17/F11 ambient temperature +24.5 deg C, RH 37.0%, d.p. +9.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)

13.06 Check ASIC Control x2
      Zero all spectra

      Restart terminal servers for Httpd for Merger/TapeServer, Merger & TapeServer
      Restart browser for Merger & TapeServer
      N.B. *no FEE64 power cycle, no DAQ RESET, SETUP etc*

11.30 DAQ starts
      File May2017/R12

13.10 DAQ GO - data transfer links for nnaida11 & nnaida12 dropped

      DAQ STOP
      Disable all data transfer links
      Restart terminal servers for Httpd for Merger/TapeServer, Merger & TapeServer
      Restart browser for Merger & TapeServer
      Enable all data transfer links

      DAQ GO OK
      File May2017/R13

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff