08:36 DAQ still running
      Not writing data to disk

      Bias and leakage currents ok - attachment 1
      System wide checks all ok
      FEE Temperatures ok - attachment 2
      Statistics - attachment 3
      Check ASIC Control done

08:56 Pulser peaks are ok and similar to what has been observed over the past two weeks
      Layout 4 and 5 - attachments 4 and 5

11.55 Lost connection to FEE64 1-16 - fuse blown
      stopped DAQ
      switched all FEE64 off
      Replaced 20A fuse
      switched FEE64 back on individually
      system wide checks ok, except nnaida7 failure in ADC calibration
      DAQ start (not writing to file)
      FEE64 temperatures ok (attachment 6)
      Bias/Leakage currents ok (attachment 7)
      good event statistics ok (attachment 8)

17.08 all system wide checks OK *except* nnaida7 fails ADC calibration
      detector biases & leakage currents OK - see attachments 9 & 10

      FEE64 temperatures OK - see attachment 11
      good event statistics OK - see attachment 12

      per FEE64 rate spectra - see attcahment 13

      1.8.L spectra - see attachments 14 & 15
       nnaida1 pulser peak width 72 ch FWHM

      1.8.W spectra 20us FSR - see attachments 16 & 20
      1.8.W spectra 200us FSR - see attachments 17 & 21
      1.8.W spectra 2ms FSR - see attachments 18 & 22
      1.8.W spectra 20ms FSR - see attachments 19 & 23