16.44 DAQ continues OK - AIDA file RIBF148/R5_432
      165Pm BigRIPS setting + 2.8mm Al degrader

      ASIC settings 2018Oct03-13.26.58
       from c. 09.00 13.11.18
       n+n FEE64s Ibias LF feedback 0xb -> 0xd
       HEC fast comparator threshold 0x20 -> 0xff

      BNC PB-4 pulser 
      Amplitude 90,000, x5 attenuator IN
      t_r 50ns tau_d 1ms
      Frequency min
      Delay min
      
16.45 BigRIPS and BRIKEN stop
      AIDA on File R5_432

16.48 BigRIPS starts run 1047
      BRIKEN starts run 62
      AIDA on file R5_433

16.57 online MIDASsort

      m_p versus m_n (LEC) - attachment 1
      x versus y (LEC) - attachment 2
      E_p versus E_n (LEC) - attachment 3
      m_p versus m_n (HEC) - attachment 4
      x versus y (LEC) - attachment 5
      E_p versus E_n (LEC) - attachment 6

      all MIDASsort spectra zero'd

17.17 file RIBF128/R5_436 ADC data synchronised - attachment 7
      analysis of RIBF148/R5_436 - attachment 8
       max dead time nnaida19 ~0.25%

17.48 BigRIPS and BRIKEN stop
      AIDA on File R5_443

17.48 BigRIPS starts run 1048
      BRIKEN starts run 63
      AIDA on file R5_443

18.45 BigRIPS and BRIKEN stop
      AIDA on File R5_452

18.47 BigRIPS starts run 1049
      BRIKEN starts run 64
      AIDA on file R5_453

19.45 BigRIPS and BRIKEN stop
      AIDA on File R5_463

19.46 BigRIPS starts run 1050
      BRIKEN starts run 65
      AIDA on file R5_463

20.49 BigRIPS and BRIKEN stop
      AIDA on File R5_473

20.49 BigRIPS starts run 1051
      BRIKEN starts run 66
      AIDA on file R5_473

21.49 BigRIPS and BRIKEN stop
      AIDA on File R5_483

      ASIC check load

21.50 BigRIPS starts run 1052
      BRIKEN starts run 67
      AIDA on file R5_484

22.00 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 9 & 10

      FEE64 temperatures OK - see attachment 11
      good event statistics OK - see attachments 12

      Merger OK - see attachment 13
      TapeServer OK - see attachment 14
      1x merger error message reported - trying to add items to Q index 12 (Link 12) but queue alreday full

      per FEE64 Rate spectra - attachment 15

      1.8.L spectra - attachments 16 & 17
       nnaida1 pulser peak width 73 ch FWHM
      1.8.H spectra - attachments 18 & 19
      1.8.W spectra 20ms FSR - attachments 20 & 21


22.48 BigRIPS and BRIKEN stop
      AIDA on File R5_493

22.50 BigRIPS starts run 1053
      BRIKEN starts run 68
      AIDA on file R5_493

23.24 BRIKEN DAQ found stopped - no sync check data - BigRIPS DAQ stopped and restarted
      AIDA on File R5_499

23.26 BigRIPS starts run 1054
      BRIKEN starts run 69
      AIDA on file R5_499