32x FEE64 re-programmed from version 7 to version 8 per instructions 

https://elog.ph.ed.ac.uk/AIDA/183

See attachments 1-3 

PJCS What is the significance of 125 / 126 in the response from each FEE64?

The latest (and greatest!) version of MIDASsort has been installed.

To use MIDASsort

aidas1> setenv PATH /MIDAS/bin_Linux64:$PATH
aidas1> MIDAS64-session

Select 'MIDAS Data Analysis' from the 'MIDAS Application Selection' pop-up
Select 'Sort Tool' from 'MIDAS Base Frame'

AIDA data is written in the GREAT format

http://npg.dl.ac.uk/documents/edoc504/edoc504.html
https://elog.ph.ed.ac.uk/AIDA/113

Select 'Settings' from 'MIDAS Sort (64 bit) Control Frame' window

Select 'Use Gfortran?'
Select 'Sunsort spectrum name convention?' 
Select 'Kill memsas server on Exit'

Select Input Data Format GREAT from 'MIDAS Sort (64 bit) Control Frame' window
Select 'Disk Info' from 'MIDAS Sort (64 bit) Control Frame'
        Select 'Block size' 65536 from 'MIDASsort: Disk Info' window

                                                   UP
                                       nnaida25
                                       nnaida26
                                       nnaida1  nnaida9   nnaida17
LEFT                                   nnaida2  nnaida10  nnaida18                                   RIGHT
nnaida31  nnaida23  nnaida15  nnaida7                               nnaida3   nnaida11  nnaida19  nnaida27
nnaida32  nnaida24  nnaida16  nnaida8                               nnaida4   nnaida12  nnaida20  nnaida28
                                       nnaida5  nnaida13  nnaida21
                                       nnaida6  nnaida14  nnaida22
                                       nnaida29
                                       nnaida30
                                                  DOWN

                                           <LOOKING UPSTREAM>

LEFT-RIGHT n+n ohmic strips
UP-DOWN    p+n junction strips

aidas1 /etc/dhcp/dhcpd.conf update

to install two scratch FEE modules assembled by PJCS April 2016

Previous version of configuration file saved to /etc/dhcp/dhcpd.conf.BAK-2May2016

#
# DHCP Server Configuration file.
#   see /usr/share/doc/dhcp*/dhcpd.conf.sample  
#

authoritative;

ddns-update-style none; ddns-updates off;

max-lease-time 691200;

option domain-search code 119 = string;

subnet 10.1.1.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.1.255;
   option routers 10.1.1.250;
   pool {
      range 10.1.1.100 10.1.1.249;
   }
}

subnet 10.1.2.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.2.255;
   option routers 10.1.2.250;
   pool {
      range 10.1.2.100 10.1.2.249;
   }
}

subnet 10.1.3.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.3.255;
   option routers 10.1.3.250;
   pool {
      range 10.1.3.100 10.1.3.249;
   }
}

subnet 10.1.4.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.4.255;
   option routers 10.1.4.250;
   pool {
      range 10.1.4.100 10.1.4.249;
   }
}

subnet 10.1.5.0 netmask 255.255.255.0 {
   option subnet-mask 255.255.255.0;
   option broadcast-address 10.1.5.255;
   option routers 10.1.5.250;
   pool {
      range 10.1.5.100 10.1.5.249;
   }
}

group {
   use-host-decl-names true;
   default-lease-time 3600;
   max-lease-time 14400;

   server-name "10.1.1.250";
   next-server 10.1.1.250;

   host nnrpi1 {
     hardware ethernet b8:27:eb:78:ee:44;
     fixed-address 10.1.1.251;
   }
   host nnaida1 {
     hardware ethernet 00:04:a3:2a:d0:1b;
     fixed-address 10.1.1.1;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida1,tcp";
   }
   host nnaida2 {
     hardware ethernet 00:04:a3:2a:d9:e1;
     fixed-address 10.1.1.2;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida2,tcp";
   } 
   host nnaida5 {
     hardware ethernet 00:04:a3:2a:d0:10;
     fixed-address 10.1.1.5;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida5,tcp";
   }
   host nnaida6 {
     hardware ethernet 00:04:a3:2a:d4:b7;
     fixed-address 10.1.1.6;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida6,tcp";
   }
   host nnaida9 {
     hardware ethernet 00:04:a3:2a:d9:ad;
     fixed-address 10.1.1.9;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida9,tcp";
   }
   host nnaida10 {
     hardware ethernet 00:04:a3:2a:f7:07;
     fixed-address 10.1.1.10;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida10,tcp";
   }
   host nnaida13 {
     hardware ethernet 00:04:a3:2b:11:b9;
     fixed-address 10.1.1.13;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida13,tcp";
   }
   host nnaida14 {
     hardware ethernet 00:04:a3:2b:11:b8;
     fixed-address 10.1.1.14;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida14,tcp";
   }
   host nnaida17 {
     hardware ethernet 00:04:a3:2a:d9:cc;
     fixed-address 10.1.1.17;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida17,tcp";
   }
   host nnaida18 {
     hardware ethernet 00:04:a3:2a:b2:b2;
     fixed-address 10.1.1.18;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida18,tcp";
   }
   host nnaida21 {
     hardware ethernet 00:04:a3:2b:27:23;
     fixed-address 10.1.1.21;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida21,tcp";
   }
   host nnaida22 {
     hardware ethernet 00:04:a3:2a:f6:e9;
     fixed-address 10.1.1.22;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida22,tcp";
   }
   host nnaida25 {
     hardware ethernet 00:04:a3:2a:d0:11;
     fixed-address 10.1.1.25;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida25,tcp";
   }
   host nnaida26 {
     hardware ethernet 00:04:a3:2b:27:54;
     fixed-address 10.1.1.26;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida26,tcp";
   }
   host nnaida29 {
     hardware ethernet 00:04:a3:2a:d0:06;
     fixed-address 10.1.1.29;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida29,tcp";
   }
   host nnaida30 {
     hardware ethernet 00:04:a3:2a:d9:b6;
     fixed-address 10.1.1.30;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida30,tcp";
   }


}


group {
   use-host-decl-names true;
   default-lease-time 3600;
   max-lease-time 14400;

   server-name "10.1.2.250";
   next-server 10.1.2.250;

   host nnaida3 {
     hardware ethernet 00:04:a3:2a:f7:06;
     fixed-address 10.1.2.3;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida3,tcp";
   }
   host nnaida4 {
     hardware ethernet 00:04:a3:2a:ed:b8;
     fixed-address 10.1.2.4;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida4,tcp";
   }
   host nnaida7 {
     hardware ethernet 00:04:a3:2a:b8:8d;
     fixed-address 10.1.2.7;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida7,tcp";
   }
   host nnaida8 {
     hardware ethernet 00:04:a3:2a:9c:07;
     fixed-address 10.1.2.8;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida8,tcp";
   }
   host nnaida11 {
     hardware ethernet 00:04:a3:2b:11:af;
     fixed-address 10.1.2.11;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida11,tcp";
   }
   host nnaida12 {
     hardware ethernet 00:04:a3:2a:d0:2f;
     fixed-address 10.1.2.12;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida12,tcp";
   }
   host nnaida15 {
     hardware ethernet 00:04:a3:2a:f3:ac;
     fixed-address 10.1.2.15;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida15,tcp";
   }
   host nnaida16 {
     hardware ethernet 00:04:a3:2a:9c:0e;
     fixed-address 10.1.2.16;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida16,tcp";
   }
# 1 of 2 scratch FEE modules assembled by PJCS April 2016
   host nnaida19 {
     hardware ethernet 00:04:a3:2b:09:e7;
     fixed-address 10.1.2.19;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida19,tcp";
   }
   host nnaida20 {
     hardware ethernet 00:04:a3:2b:22:55;
     fixed-address 10.1.2.20;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida20,tcp";
   }
   host nnaida23 {
     hardware ethernet 00:04:a3:2a:b8:90;
     fixed-address 10.1.2.23;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida23,tcp";
   }
   host nnaida24 {
     hardware ethernet 00:04:a3:2a:b6:45;
     fixed-address 10.1.2.24;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida24,tcp";
   }
# 2 of 2 scratch FEE modules assembled by PJCS April 2016
   host nnaida27 {
     hardware ethernet 00:04:a3:2a:ed:9a;
     fixed-address 10.1.2.27;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida27,tcp";
   }
   host nnaida28 {
     hardware ethernet 00:04:a3:2b:11:c5;
     fixed-address 10.1.2.28;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida28,tcp";
   }
   host nnaida31 {
     hardware ethernet 00:04:a3:2b:11:ae;
     fixed-address 10.1.2.31;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida31,tcp";
   }
   host nnaida32 {
     hardware ethernet 00:04:a3:2a:ed:b9;
     fixed-address 10.1.2.32;
     option root-path "/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida32,tcp";
   }
}


group {
# 8 days
   default-lease-time 691200;

#    option dhcp-client-identifier "\0foo";

   host nndhcp052 {
# Analysis server
     hardware ethernet 00:22:19:50:02:40;
     fixed-address 10.1.1.252;
   }

}

UPSTREAM


Detector  Serial  Operating  CAEN N1519  CAEN N1519  Bias    FEE64                  Bias Config   
#         #       Bias (V)   Addr #      channel #   Cable                          Core      Braid

1         3058-2   +100       0           0          1       nnaida25, 27, 30 & 32  nnaida27  nnaida29 (LK5)
2         3058-3   +100       0           1          2       nnaida18, 20, 22 & 23  nnaida20  nnaida22 (LK1)
3         3058-4   +100       0           2          3       nnaida17, 19, 21 & 24  nnaida19  nnaida21 (LK5)
4         3058-5   +100       0           3          4       nnaida10, 12, 14 & 15  nnaida12  nnaida14 (LK1)
5         3058-6   +100       1           0          5       nnaida9, 11, 13 & 16   nnaida11  nnaida13 (LK5)
6         3058-7   +100       1           1          6       nnaida2, 4, 6 & 7      nnaida4   nnaida6 (LK1)
7         2977-15  +100       1           2          7       nnaida1, 3, 5 & 8      nnaida3   nnaida5 (LK5)
8                             1           3          8


DOWNSTREAM

Notes
_____

MSL type BB18 PCB ground links (LK3 & LK7) not fitted

To be checked

Attachments 1-4 MSL type 2977-2- adaptor PCB configurations (looking downstream) L, D, R, U

Attachments 5-6 MSL type 2977-20 illustrating polyethyelene 'bagging' of 3M 1345-wrapped
ribbon cables

MSL type BB18 serial # 2977-20 bias +100V I_L +12.45uA T=23 deg C
(biased by nnaida # 3 & 5 )

DSSSD - AIDA adaptor PCB cabling
 
4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (62cm p+n, 53cm n+n),
RH coupler(Kapton PCB, 10cm)
 + 3M 1245 1.4mil copper foil screen ribbon cables (i.e. not RH & LH couplers)
 + drain wires -> gold-plated Lemo-00 test input connectors

to FEE64s in 4x FEE module crates

3M 1245-wrapped cables enclosed by polyethyelene bags (supplied to deliver 90cm Printech Kapton PCBs)
to ensure no electrical contact with snout, DSSSD mounting tubes, snout base etc

Snout drain wire to FEE module Cu block

nnaida 3 & 8 AIDA adaptor PCB rev C
nnaida 5 & 9 AIDA adaptor PCB rev C (LK1 fitted) 
ground links LK3 & LK7 *not* fitted to nnaida3, 5, 8, & 9 AIDA adaptor PCBs
LK1 fitted to nnaida5 ( cf. https://elog.ph.ed.ac.uk/AIDA/190 )

Heavy duty copper cable connects copper front end frames of FEE modules
Nitto 5011N conductive gasket between FEE module and front end frames
 
Standard ASIC settings
 nnaida 3 & 8 - negative input
 nnaida 5 & 9 - positive input
 
Pulser BNC PB-4 
Fall time 1.0ms
Rate c.100Hz
Delay min
Amplitude 50,000
Polarity -
Pulse top Tail
Atten 10x
+ polarity via EG&G Ortec 433A Sum & Invert Amplifier

Standard ASIC settings

Shaping time 8us
LEC/MEC Slow com 32 (dec)
        Fast com 32 (dec)
HEC Fast com 2(dec)

Attachments 1-4 ASIC #1 waveforms from each FEE64
            5-8 ASIC #2 spectra + 2.0.L pulser peak width 

Pulser peak widths (ch FWHM) versus shaping time ( spectrum 2.4.L )

tau nnaida3 nnaida5 nnaida8 nnaida9
 8   68      60      70      62
 4   83      49      88      48
 2  100      47     109      43
 1  172      60     165      42
0.5 380      86     309      48  

Note: n+n ohmic strips spectra > 100 ch FWHM display non-gaussian peaks/double peaking 

15.45 Attempted to increase detector bias from +100V to +150V
      Leakage current increased ~0.5uA/V for bias > 115V
      Detector bias supply trips (20uA) at +120V
      Remain at detector bias +100V

16.17 Switch polarity of detector bias from + to -
      Move LK1 from nnaida5 to nnaida3

tau nnaida3 nnaida5 nnaida8 nnaida9
 8   61      64      65      61

n+n ohmic strips ~10% improvement, p+n junction strips no significant change

16.30 Fit LK3/LK7 jumpers to connect adaptor PCB ground to detector PCB ground
 
tau nnaida3 nnaida5 nnaida8 nnaida9
 8   61      64      62      60

No significant change to cf. previous test

18.30 Install second DSSSD

Upstream   3058-6  bias +100V I_L 4.15uA
Downstream 2977-20 bias +100V I_L 11.8uA
+ 207Bi source ~3cm upstream of 3058-6

Standard ASIC settings
shaping time 6us
slow comp 8(dec)
HEC fast comp 2(dec)
LEC/MEC fast comp 16(dec)

Pulser peak widths ~60 ch FWHM per previous tests today

Discriminator masks TBD

22.27 R2 to disk (directory /data20/TapeData/May2016)
      MERGE data links 2-9

Run data to disk overnight. Add two more DSSSDs tomorrow.

09.21 R2 stopped

MSL type BB18 serial # 2977-20 bias +100V I_L +12.0uA T=23 deg C
(biased by nnaida # 3 & 5 )

DSSSD - AIDA adaptor PCB cabling
 
4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (62cm p+n, 53cm n+n),
RH coupler(Kapton PCB, 10cm)
 + 3M 1245 1.4mil copper foil screen ribbon cables (i.e. not RH & LH couplers)
 + drain wires -> gold-plated Lemo-00 test input connectors

to FEE64s in 4x FEE module crates

Snout drain wire to FEE module Cu block

nnaida 3 & 8 AIDA adaptor PCB rev C
nnaida 5 & 9 AIDA adaptor PCB rev C (LK1 fitted) 
ground links LK3 & LK7 fitted to nnaida3, 5, 8, & 9 AIDA adaptor PCBs

*** Note added 11.58 sat 30 Apr 2016
Detector bias cable to nnaida3 & 5 adaptor PCBs *but* LK1 fitted to nnaida9 *not* nnaida5.
This has been set this way since start of current series of tests Wed 27 April. Connecting
via a different adaptor PCB to that connected to the CAEN N1419 bias supply causes significant
noise issues presumably due to high resistance path via 2x adaptor PCB to DSSSD cables
and the DSSSD bias bus line on the DSSSD.

Heavy duty copper cable connects copper front end frames of FEE modules
Nitto 5011N conductive gasket between FEE module and front end frames
 
Standard ASIC settings
 nnaida 3 & 8 - negative input
 nnaida 5 & 9 - positive input
 
Pulser BNC PB-4 
Fall time 1.0ms
Rate c.100Hz
Delay min
Amplitude 50,000
Polarity -
Pulse top Tail
Atten 10x
+ polarity via EG&G Ortec 433A Sum & Invert Amplifier

Pulser peak widths broad, structured, non gaussian c. 200ch FWHM

attachments 1-4 ASIC # 1 waveforms for each acqserver with all acqservers connected to same PSU

attachments 5-6 for comparison, from yesterday, with acqservers from two different PSUs - note
absence of HF noise in attachments 1-4 cf. attachments 5-6. 

Edit the file /MIDAS/config/TclHttpd/aidas1/startup.tcl and change the definition of variables
PACQSERVERS, NACQSERVERS, ACQSERVERS (respectively p+n junction strip FEE64s, n+n ohmic strip
FEE64s, and all FEE64s) for example,
     
    variable PACQSERVERS; set PACQSERVERS { nnaida5 nnaida6 nnaida9 nnaida10}
    variable NACQSERVERS; set NACQSERVERS { nnaida3 nnaida4 nnaida7 nnaida8}
    
    lappend ACQSERVERS nnaida3
    lappend ACQSERVERS nnaida4
    lappend ACQSERVERS nnaida5
    lappend ACQSERVERS nnaida6
    lappend ACQSERVERS nnaida7
    lappend ACQSERVERS nnaida8
    lappend ACQSERVERS nnaida9
    lappend ACQSERVERS nnaida10

You will need to close the web browser running MIDAS, restart the 'Httpd for Acquisition' server,
restart the web browser and start the MIDAS DAQ session.

On the 'Run Control' page, toggle 'Act on ALL Data Acquisition Servers' and select 'Reload' - the
revised acquisition server list should now be shown.

2 (of 3) WD 3Tb ATA disk drives are not currently mounted on aidas1.
Attempted to mount them but found device names changed at each boot.
See https://elog.ph.ed.ac.uk/AIDA/186

Mounted Seagate Backup Plus 8Tb USB disk drive - currently /dev/sda2 mounted
as /ntfs
See https://elog.ph.ed.ac.uk/AIDA/187

Started Raspberry Pi nnrpi1 - USB controlled ac mains relay OK

Startup AIDA and test with pulser and no external load.
Typical pulser peak widths ~12-14 ch FWHM as expected. 

I have installed a Seagate Backup Plus 8Tb (nominal) USB disk for data backup and
transfer to the UK

As superuser

mount -t ntfs-3g /dev/sda2 /ntfs

[root@aidas1 npg]# df -h /ntfs
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda2       7.3T  167G  7.2T   3% /ntfs

The device name will probably wander at each boot but can be obtained by using

Applications -> System Utilities -> Disk Utility

and selecting device from the menu of Storage Devices.

The aidas1 /etc/fstab file contained commented out entries for 2 (of 3) WD 3Tb disks
(slot # 3, 4 & 5). The entries are also incorrect - /dev/sdg1 does not exist and
/dev/sdc1 is already used by the OS. This file was most recently changed 8 June 2015.

*** Added note *** 
The device list (/dev/sda etc) changes at each boot - at a subsequent reboot the
WD 3Tb disks moved from /dev/sdb, e & f to /dev/sdc, f & g.



cat /etc/fstab.ORIG

#
# /etc/fstab
# Created by anaconda on Tue Jan  7 13:48:12 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_aidas1-lv_root /                       ext4    defaults        1 1
UUID=23874852-9e28-4e64-8857-2fb66e38e877 /boot                   ext4    defaults        1 2
/dev/mapper/vg_aidas1-lv_home /home                   ext4    defaults        1 2
/dev/mapper/VolGroup00-LogVol01 swap                    swap    defaults        0 0
/dev/mapper/vg_aidas1-lv_swap swap                    swap    defaults        0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
/dev/Data1/data10		/data10		ext3	defaults	1 2
/dev/sdf1          /data20   ext4    defaults  1 3
#/dev/sdg1          /data30   ext4    defaults  1 4

#/dev/sdc1          /data40   ext4    defaults  1 5



The new /etc/fstab file enables all 3 (of 3) WD 3Tb disks



aidas1> cat /etc/fstab

#
# /etc/fstab
# Created by anaconda on Tue Jan  7 13:48:12 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_aidas1-lv_root /                       ext4    defaults        1 1
UUID=23874852-9e28-4e64-8857-2fb66e38e877 /boot                   ext4    defaults        1 2
/dev/mapper/vg_aidas1-lv_home /home                   ext4    defaults        1 2
/dev/mapper/VolGroup00-LogVol01 swap                    swap    defaults        0 0
/dev/mapper/vg_aidas1-lv_swap swap                    swap    defaults        0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
/dev/Data1/data10	/data10		ext3	defaults	1 2
/dev/sdf1		/data20		ext4	defaults	1 3
/dev/sdb1		/data30		ext4	defaults	1 4
/dev/sde1		/data40		ext4	defaults	1 5

aidas1> df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_aidas1-lv_root
                       50G   27G   20G  58% /
tmpfs                 3.9G  136K  3.9G   1% /dev/shm
/dev/sda1             477M   77M  376M  17% /boot
/dev/mapper/vg_aidas1-lv_home
                      860G  106M  816G   1% /home
/dev/mapper/Data1-data10
                      1.8T  1.6T  128G  93% /data10
/dev/sdf1             2.0T   32G  1.9T   2% /data20
/dev/sdb1             2.0T   71M  1.9T   1% /data30
/dev/sde1             2.0T  1.8T  140G  93% /data40


aidas1> ls /data10/TapeData
AIDA1    expt101  Feb2015  NULL    R202_0  TAPE1
expt100  expt201  May2015  R200_0  R6      test1
aidas1> ls /data20/TapeData
Dec2015  Mar2016
aidas1> ls /data30/TapeData
ls: cannot access /data30/TapeData: No such file or directory
aidas1> ls /data40/TapeData
May2015

AIDA stand, Julabo FL11006 recirculating chiller (with 110VAC/50Hz - 240VAC/50Hz 3ph transformer)
moved from F11 downstream wall to ~2m downstream of EURICA

Julabo FL11006 recirculating chiller emptied, re-filled and tested OK

Completed installation of non-grounded, cat 6 network cables between Netgear Gbit network switches
and AIDA FEE mdoules

During a reboot of aidas1 the message 

Binding NIS service FAILED

was observed during the services startup sequence. Is this an issue?

I can ping/ssh w29.ph.ed.ac.uk (Edinburgh NP group Sun server).

/var/log/messages appended

To update the FEE64 firmware:-

1. Power-up the FEE64 modules that you wish to update.
2. Identify the file to be used ( FEE_GF_Feb16_15.bin  at 14/4/2016 )
3. This file should be in the Server ( e.g. aidas1 ) at /MIDAS/Aida.
4. Edit the file /MIDAS/Aida/FlashPgm.csh and change the file name at the "flashcp" command line to be the file you wish to update the FEE64s with.
5. To run the file, and hence update the firmware, open the RunControl page and select "Program Flash Memories" from the menu of System Functions.
6. Each of the FEE64 cards in the system at the time will update their firmware using the commands from the  /MIDAS/Aida/FlashPgm.csh file.
7. Once complete a log window will be displayed with a report about each FEE64.
8. Power-cycle the FEE64s to load and run the new firmware.
9. Use the "FEE Temperatures" page to check that all the FEE64 cards have the same version of the firmware loaded as expected. ( 0x10300C12 at 14/4/2016 )
10.  

MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +=5.515uA, ambient temperature +19.8 deg C
 
DSSSD - AIDA adaptor PCB cabling
 
4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm)
 + 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler)
 + drain wires -> gold-plated Lemo-00 test input connectors 
 
nnaida 11 & 12 AIDA adaptor PCB rev B
nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted) 
ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs

Heavy duty copper cable connects copper front end frames of FEE modules
Nitto 5011N conductive gasket between FEE module and front end frames
 
Standard ASIC settings
 nnaida 11 & 12 - negative input
 nnaida 13 & 14 - positive input
 
Pulser BNC PB-5 
Fall time 1.0ms
Rate 100Hz
Delay 250ns
Ampl 5.00000V
Polarity +
Pulse top Tail
Atten 10x
Clamp ON
- polarity via Cooknell SA1 Summing Amplifier
 
207Bi source, approx centred on DSSSD, approx 3cm from DSSSD

AIDA FEE firmware version 8
  + sync 500kHz ASIC clock

File R53
shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 16 (dec)
start: 10.50 stop: 13.30 23.3.16
spectra saved to disk 14.30 (BST) (sic)
Pulser OFF
nnaida 11 disc # 55 disabled
       12 disc # 2 & 55 disabled
       13 & 14 *no* discs disabled

nnaida14 sampling ADCs not calibrated for previous run *but* no wavfeform data streams enabled so not a 
problem

new PCS diagnostics indicate FEE ASIC clocks aligned & synchronised - check!

File R53
shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 10 (dec)
start: 14.30 23.3.16 stop:
spectra saved to disk

Pulser OFF

nnaida 11 disc # 55 disabled
       12 disc # 2 & 55 disabled
       13 & 14 *no* discs disabled

nnaida11, 12, 13 & 14 waveforms & verniers enabled - see attachments 1-7
           (data queue for nnaida12 waveforms & verniers disabled to avoid problems merger even though nnaida
produces WAVE SYNCs)

R54 stopped at 16:54. disc full.

Here is a document about the FEE64 waveform Vernier Timing.

Please comment/criticise/offer advice.

See https://elog.ph.ed.ac.uk/AIDA/179

207Bi source, no pulser

Shaping time 8us
Slow comparator 0xa
Fast comparator 0xa

Re-order ASIC <-> MSL type BB18 adaptor PCB J1 connector mapping - see below

C----67---------------------------------------------------------------72------80

      FUNCTION bb18order( channel )

      INTEGER array( 0:63 ), bb18order, channel

C     ASIC # 0 channel # 0 = array(0)
C     ASIC # 1 channel # 0 = array(16)
C     ASIC # 2 channel # 0 = array(32)
C     ASIC # 3 channel # 0 = array(48)
C     Array contents correspond to the MSL type BB18 adaptor J1 connector
C     strip sequence # 0-63
 
      DATA array /
     +  62, 63, 59, 60, 61, 56, 57, 58, 52, 53, 54, 55, 49, 50, 51, 45,
     +  46, 47, 48, 42, 43, 44, 38, 39, 40, 41, 35, 36, 37, 31, 32, 33,
     +  34, 28, 29, 30, 24, 25, 26, 27, 21, 22, 23, 17, 18, 19, 20, 14,
     +  15, 16, 10, 11, 12,  7,  3,  0,  8,  4,  1,  9,  5,  2, 13,  6 /
  
      bb18order = array( channel )

      RETURN

C----67---------------------------------------------------------------72------80

      END

C----67---------------------------------------------------------------72------80

Which can be used, for example, as follows:

       channel = bb18order( channel )
       ch = channel + ( module - 1 ) * 64 + ( range * 2048 )

where channel (ASIC channels # 0-63), module (FEE #) and range (0=LEC/MEC, 1=HEC)
are supplied by the GREAT format data item.

Attachments 1-7 - 2D hit pattern showing which (if any) other channels j are active
( hit(j) = .true. ) in an event (< 410 clock cycles) in addition to channel i

      DO i = 640, 767
       IF ( hit( i ) ) THEN
        DO j = i, 767
         IF ( hit( j ) ) THEN
          CALL inc2d( 4014, i - 640, j - 640 )
         ENDIF
        ENDDO
       ENDIF
      ENDDO

      DO i = 768, 895
       IF ( hit( i ) ) THEN
        DO j = i, 895
         IF ( hit( j ) ) THEN
          CALL inc2d( 4014, i - 640, j - 640 )
         ENDIF
        ENDDO
       ENDIF
      ENDDO

Attachments 1-7 should be compared with the same spectrum shown in https://elog.ph.ed.ac.uk/AIDA/177

MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +=5.845uA, ambient temperature +19.8 deg C
 
DSSSD - AIDA adaptor PCB cabling
 
4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm)
 + 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler)
 + drain wires -> gold-plated Lemo-00 test input connectors 
 
nnaida 11 & 12 AIDA adaptor PCB rev B
nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted) 
ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs

Heavy duty copper cable connects copper front end frames of FEE modules
Nitto 5011N conductive gasket between FEE module and front end frames
 
Standard ASIC settings
 nnaida 11 & 12 - negative input
 nnaida 13 & 14 - positive input
 
Pulser BNC PB-5 
Fall time 1.0ms
Rate 100Hz
Delay 250ns
Ampl 5.00000V
Polarity +
Pulse top Tail
Atten 10x
Clamp ON
- polarity via Cooknell SA1 Summing Amplifier
 
207Bi source, approx centred on DSSSD, approx 3cm from DSSSD

AIDA FEE firmware version 8
  + sync 500kHz ASIC clock

File R45
shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 10 (dec)
start: 12.08 stop: 10.24 16.3.16
spectra saved to disk 11.26 BST (sic)
Pulser OFF
nnaida 11 disc # 55 disabled
       12 disc # 2 & 55 disabled
       13 & 14 *no* discs disabled

16.3.16 12.10 Bias +200V, I_L +=6.900uA, ambient temperature +19.8 deg C

See attachments 1-5


File R48
shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 255 (dec)
start: 13.45 stop:
spectra saved to disk 1BST (sic)

Pulser walkthrough

Pulser BNC PB-5 
Fall time 1.0ms
Rate 100Hz
Delay 250ns
Ampl 10.00000-1.00000V
Polarity +
Pulse top Tail
Atten 5x
Clamp ON
- polarity via Cooknell SA1 Summing Amplifier

file R52

shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 10 (dec)
start:  stop: 15.46
spectra saved to disk 16.49 BST (sic)

Pulser walkthrough

Pulser BNC PB-5 
Fall time 1.0ms
Rate 100Hz
Delay 250ns
Ampl 1.00000-0.10000V
Polarity +
Pulse top Tail
Atten 5x
Clamp ON
- polarity via Cooknell SA1 Summing Amplifier