 Sat Jul 9 21:26:25 2016, J.L. Tain, EDACQ 
|
| Electronics and DACQ for July 2016 assembly: hardware and connections |
|
Mon Jul 18 19:01:36 2016, J.L. Tain, 3He tubes
|
Adjustment of HV and PA gain
We adjust the HV for each tube type and the gain of the preamplifier (PA) in order
|
|
Wed Jul 20 11:16:18 2016, J.L. Tain, Electronics
|
Pulser settings
We use two pulsers, Pulser1 for RIKEN, ORNL1 and ORNL2 tubes (7 PA)
|
|
Fri Jul 22 12:50:29 2016, J.L. Tain, END
|
20/JUL/2016 20:00
End of the test measurements |
|
Mon May 4 15:03:47 2015, J.Agramunt J.L.Tain K.Gabor , New detector placed under the beam line
|
New detector placed under the beam line, below MUSIC chamber
This detector replace the USA tubes in the DACQ because we need the preamp to plug it.
|
|
Mon May 4 02:26:14 2015, J.Agramunt J.L.Tain K.Gabor, F11 trigger plugged in Mod2 Ch16 of Briken daq
|
| |
|
Mon May 4 02:36:16 2015, J.Agramunt J.L.Tain K.Gabor, Maki trigger plugged in Mod2 Ch9
|
| |
|
Mon May 4 04:14:18 2015, J.Agramunt J.L.Tain K.Gabor, AIDA trigger plugged in Mod2 Ch12
|
| AIDA trigger plugged in Mod2 Ch12 |
|
Fri May 8 03:20:48 2015, J.Agramunt J.L.Tain K.Gabor, BnCorrelation
|
| We run all the night until the end of beam time, and the Bn correlations are more clear now. |
|
Thu Mar 30 01:46:30 2017, J.Agramunt, 40Mg Run 009
|
Date: 30/03/2017
Start: 09:47
|
|
Tue Feb 24 09:34:54 2015, J. Agramunt, H. Baba, A. Estrade, [DAQ] DAQ correlation test
|
We have performed a successful test of the integration of independent DAQ systems based on a correlation
scalar counted from a common clock signal. The principles of the integration method are described in the
|
|
Wed Jul 20 17:21:59 2016, J. Agramunt, A. Tolosa, DACQ
|
DACQ configuration parameters
The last configuration file used was: 160718Conf_BrikenFull_cal5.xlsx
|
|
Wed May 6 11:41:24 2015, J. Agramunt, A. Estrade, First online combined analysis
|
Screen shot of the rudimentary on-line
analysis of the combined data:
BRIKEN-AIDA-BigRIPS
|
|
Mon Oct 31 23:56:37 2016, J. Agramunt, First AIDA BRIKEN correlation plot
|
| From the 252Cf data. |
|
Wed Mar 29 03:02:02 2017, J. Agramunt, Synchronization test procedure (update)
|
To Launch the processes:
Open 4 terminals:
|
|
Wed Mar 29 07:34:16 2017, J. Agramunt, BrikenTools repository installed at d05
|
The last version of Briken tools repository has ben installed at d05, this repository includes the Merger and the BrikenOffline codes, as well as a CommonTools
folder to share scripts and code.
For update versions, just type in the desired directory "svn update". |
|
Wed Mar 29 22:53:58 2017, J. Agramunt, 40Mg Run007
|
Date: 30/03/2017
|
|
Thu Mar 30 00:47:04 2017, J. Agramunt, 40Mg Run 008
|
Date: 30/03/2017
Start: 08:41
|
|
Thu Mar 30 03:55:42 2017, J. Agramunt, 40Mg Run 10
|
Date: 30/03/2017
Start: 11:52
|
|
Fri May 26 09:07:46 2017, J. Agramunt, Synchronization Monitoring
|
We started the synchronization monitoring programs to check that
it is OK as can be seen in the figure below
|