 Mon Nov 7 09:04:10 2016, Phong,Liu,Ale,Jose, New AIDA plastic calibration 
|
To have a range of about 200 MeV
Ortec671 Gain from x20 to x5 (fine gain : x0.5)
|
|
Mon Nov 7 04:37:33 2016, Phong,Liu,..., Si de and AIDA plastic calibration
|
60Co source placed close to the detectors:
ROOT files:
|
|
Mon Oct 17 05:21:46 2016, Phong, Liu J J, dE detector position and output signal from preamplifier
|
dE detector is mounted onto the back side of the shielding (attached photo: dE_position.JPG)
The detector consists of 26 strips. In this setup, the detector is devided into 2 parts corresponding to 2 readout channels. Each part consists of 13 strips |
|
Sun Nov 27 10:47:20 2016, PV,TD,GK, 40Mg. Run 32
|
======= START =======
Date 2016/11/27
Start time : 16:20
|
|
Tue Nov 29 00:30:42 2016, PV,SN, Sillicon dE bias voltage increased
|
We increase the bias voltage of the dE detector from 20 V to 100 V
Leakage current:
Before: ~0.590 uA |
|
Sat Apr 1 11:13:42 2017, PV,OH,JLT, 37Na run 62
|
Date: 1/04/2017
Start:19:09
BRIKEN run: 62
|
|
Mon Mar 27 11:53:15 2017, PV,Liu, Turn on dE detector
|
We applied a bias voltage of 100 V to the dE detector
Current read = 0.660 uA
compare with https://elog.ph.ed.ac.uk/BRIKEN/190. it is slighly lower. |
|
Sat Apr 1 12:15:21 2017, PV, OH, JLT, ID, JA, 37Na run 63
|
Date: 1/04/2017
Start:20:15
BRIKEN run: 63
|
|
Tue Mar 28 06:56:15 2017, PV, Liu, JA, JLT, F11 Plastic
|
Calibration of new F11 plastic
(see photo)
|
|
Wed Mar 29 11:02:40 2017, PV, Liu, JA, JLT, F11 plastic
|
New calibration of F11 plastic
We decided to have both a low gain and a high gain
|
|
Tue Nov 8 02:49:19 2016, PV, Liu, Specification of the dE silicon detector
|
The specification and picture of the dE silicon detector is shown in the attached photos.
The detector has an effective area of 134 x 123 mm and 320 micrometer thick
There are 26 vertical strips. They are combined into 2 readout channels (top and bottom which respect to the orientation of the detector in BRIKEN) |
|
Tue Nov 22 10:22:07 2016, PV, Liu, No current observed when turning on the HV for the D4 Clover
|
19:00
We've turned on the High Voltage for the D4 Clover up to ~ 1.5 kV.
There is no current (0.0 uA) observed in all the channels (crystals) of this clover while the High Voltage is
|
|
Sun Nov 27 11:15:42 2016, PV, GK, AE, TD , 40Mg. Run 34
|
======= START =======
Date 2016/11/27
Start time : 17:29
|
|
Sun Nov 27 11:07:02 2016, PV, GK, AE, TD, 40Mg. Run 33 - junk
|
======= START =======
Date 2016/11/27
Start time : 17:17
|
|
Sat Apr 1 14:21:31 2017, PV OH Liu JLT, 37Na run 65
|
Date: 1/04/2017
Start:22:12
BRIKEN run: 65
|
|
Fri Mar 31 10:35:22 2017, PV CG JA, Run 40
|
Date: 31/03/2017
Start:
BRIKEN run: 40
|
|
Thu Dec 8 04:17:49 2016, PV, Installing BRIKEN ELOG 2016 in RIBF local network to a personal computer
|
All the RIBF123 elog website (including Takechi and Fallon experiment) can be downloaded and installed from the following link:
https://drive.google.com/file/d/0B5rBCXKaAWNARVViSTBNSE80RzQ/view?usp=sharing
To run and view the elog website in your local computer (tested with Centos 7, it may work with Ubuntu or any other linux distro) |
|
Fri Dec 9 05:25:26 2016, PV, Photo and schematic drawing of the Pb shielding in front of BRIKEN during Fallon experiment
|
| This Pb shielding structure is right behind the variable degrader |
|
Tue Jun 13 05:18:07 2017, PV, How to install ELOG for BRIKEN campaign 2017a
|
Get ELOG software including entries for BRIKEN campaign 2017a from mars computer:
briken@mars:/data01/2017data/briken/ur17a/elogBRIKEN2017a.tar.gz
|
|
Mon Jun 12 22:28:02 2017, Oscar, The SUSHIRO app guide
|
| It's here...it's rough...but it hopefully gets the job done |