00:00 ASIC settings 2019Dec19-16.19.51
      DSSSD#1 slow comparator 0xa
      DSSSD#2 slow comparator 0xa
      DSSSD#3 slow comparator 0xd

      BNC PB-5 Pulser 
      Amplitude1.0V
      Attenuation x1
      Frequency 2Hz
      tau_d 1ms
      - polarity
      Delay 250ns, tail pulse


00:14 All system wide checks ok *except aida06 fails clock status 6*
      Statistics - attachment 1
      FEE Temperatures - attachment 2
      Bias and leakage currents ok - attachment 3

01:20 Can see now that we are writing to a separate drive the compression is going much faster - attachment 4

02:15 All system wide checks ok *except aida06 fails clock status 6*
      Statistics - attachment 5
      FEE Temperatures - attachment 6
      Bias and leakage currents ok - attachment 7

03:43 Beam has been lost. Not and FRS fault. Several powersupplies have tripped

04:00 Noticed more bad merge events
      System wide checks has also noted an FPGA error.
      All other system wide checks same results as previous

			 Base 		Current 		Difference
aida12 fault 	 0x0 : 	 0x1 : 	 1  
FPGA Timestamp error counter test result: Passed 11, Failed 1
If any of these counts are reported as in error
The ASIC readout system has detected a timeslip.
That is the timestamp read from the time FIFO is not younger than the last

The following are timestamp values from each of the FEEs taken in sequence
If time does not increase in a reasonable manner run the system wide checks

aida01 : White Rabbit=>  166A3F29 BA0DF4D2 , WR/10=>   23DD31DC5CE3215, Readout Time =>   23DD31DC6F34000 
aida02 : White Rabbit=>  166A3F29 CC49ECD7 , WR/10=>   23DD31DC7A0FE15, Readout Time =>   23DD31DC8428000 
aida03 : White Rabbit=>  166A3F29 DF55B7E8 , WR/10=>   23DD31DC9889264, Readout Time =>   23DD31DCA85C000 
aida04 : White Rabbit=>  166A3F29 EECF82B7 , WR/10=>   23DD31DCB14C045, Readout Time =>   23DD31DCC2B8000 
aida05 : White Rabbit=>  166A3F29 FED2EFD2 , WR/10=>   23DD31DCCAEB195, Readout Time =>   23DD31DCDC14000 
aida06 : White Rabbit=>  166A3F2A 0EDC023D , WR/10=>   23DD31DCE49336C, Readout Time =>   23DD31DCF204000 
aida07 : White Rabbit=>  166A3F2A 1E8170D3 , WR/10=>   23DD31DCFD9BE7B, Readout Time =>   23DD31DD10A0000 
aida08 : White Rabbit=>  166A3F2A 30448F76 , WR/10=>   23DD31DD1A074BF, Readout Time =>   23DD31DD2A34000 
aida09 : White Rabbit=>  166A3F2A 3FE36E61 , WR/10=>   23DD31DD33057D6, Readout Time =>   23DD31DD3B94000 
aida10 : White Rabbit=>  166A3F2A 4E83A1F7 , WR/10=>   23DD31DD4A6C365, Readout Time =>   23DD31DD46A8000 
aida11 : White Rabbit=>  166A3F2A 5FD19086 , WR/10=>   23DD31DD661C1A7, Readout Time =>   23DD31DD7664000 
aida12 : White Rabbit=>  166A3F2A 6FE06F3D , WR/10=>   23DD31DD7FCD7EC, Readout Time =>   23DD31DD9684000 

04:07 Beam is back AIDA on file R6_815
      Statistics - attachment 8
      FEE Temperatures - attachment 9
      Bias and leakage currents ok - attachment 10
      ASIC check ok

      Multiple merge data error events observed

06:04 All system wide checks ok *except aida06 fails clock status 6*
      Statistics - attachment 11
      FEE Temperatures - attachment 12
      Bias and leakage currents ok - attachment 13

07:22 Beam noticed dropped but back quickly