bPlas has been mostly cabled in now

Reseat LAN cable (AIDA Switch -> AIDA-3) and reachieve 1 gbit/s speed as needed.

CHeck DAQ with MBS, working well (16 MB/s). Performance seems better than before on MBS side too

Note implant counts in aida05, observable in rate spectra (fig 1)
Also a few early channels in aida10 seem empty

ASIC check-loads didn't fix
Try powercycle... also didn't fix

Tomorrow will inspect adapter board and ribbon cable, perhaps it is loose.

Absolute rates otherwise seem OK (fig 2) aida01 and aida07 are both very hot.
aida01 is usually quieter but aida07 has always been observed running fast