17.00 FEE64 41:a0:71 ASIC #2 u/s
      Replaced ASIC mezzanine with new ASIC mezzanine
      Installed as aida04

      Unable to boot nnrpi2 - manual/local control of BNC PB-5 and FEE64 PSU - no interlock

      Water temperature & pressure as measured outside S4 area - OK 

      Manually power FEE64s

      BNC PB-5 local control/ON
      Amplitude 1.0V
      Attenuation x10
      Polarity -
      tau_d 1ms
      Frequency 22Hz

      FEE64 temps OK - attachment 1

      All system wide checks OK

      WR timestamp OK - attachment 2

      aida04 ASIC settings - attachment 3

      ADC data item stats OK - attachment 4
   
      aida04 Rate spectrum - attachment 5

      aida04 *.*.L spectra - attachments 6-9
       1.8.L pulser peak width 15 ch FWHM

      aida04 1.8.W spectra - 20us FSR - attachment 10-11

      MIDAS configuration - attachment 12

      DHCP config - attachment 13



18.30 FEE64 41:f6:b7 ASIC #1 u/s
      Replaced ASIC mezzanine with new ASIC mezzanine
      Installed as aida02

      All system wide checks OK

      FEE64 temps - attachment 14
       aida02 ASIC temperature c. 512 deg C !
       PSU/Virtex temps OK
       Mezzanine ambient to touch - assume faulty sensor/poor connection?

      aida02 ASIC settings - attachment 15

      WR timestamp OK - attachment 16

      ADC data item stats OK - attachment 4

      aida04 Rate spectrum - attachment 18

      aida02 1.8.W spectra - 20us FSR - attachment 19-20

      aida02 *.*.L spectra - attachments 21-24
       1.8.L pulser peak width 16 ch FWHM


19.30 Power OFF