Header: 4.7 MeV/u and CH2_30+25.
Ender: beam stop at PS (6 hour interruption)
====================================================
Run number			: 80
Date				: 10/11
Start time			: 08:00:49
Stop time			: 08:35:05
Trigger rate (MIDAS)            : 8 
Blocks written                  : 202
——————————————————————————————
Run Scalars (approx rates)
0- Ungated                      :  9
1- Gated                        :  8
2- dE                           :  42
3- E                            :  8
4- HI                           :  482
5- Pulser                       :  2
6- Clock                        :  967
——————————————————————————————
Beam energy			: 4.7 MeV/u
Beam intensity		        : not checked this run (should be around 1.5pA)
Target				: CH2_30+25  (Pos#6; 490-520 ug/cm2)
Ladder position		        : 67.26
HI Degrader foil (um)           : 15 um Al
——————————————————————————————
del_E voltage (V)		: -32 
del_E leakage (uA)		: 0.8 
E voltage (V)			: -350 
E leakage (uA)	                : 1.745
E_hi voltage (V)		: -13.5 to -14 
E_hi leakage (uA)		: 0.905 
——————————————————————————————
PA power (upstream, positive)   : 1.55 A 
PA power (upstream, negative)   : -0.55 A
PA power (downstream, positive) : 0.8 A
PA power (downstream, negative) : -0.28 A 
——————————————————————————————
Pressure (IMG1)		        : 6.75E-06
Pressure (old gauge)	        : 1.9E-05
Pressure (SEC)	           	: 3.9E-06
——————————————————————————————
Temp (Chiller)		        : -10.0 
Temp (chamber)		        : 5.5
——————————————————————————————
Comments: 
- since 6:20 RF problem on ring2 (although 3 full inj are shown) : ~1.6E+14 protons only
- 8.21 comment on PS: 6 hours of no beam
- 08:35 stop run, because no beam


====================================================