 Thu Sep 27 11:14:34 2018, CBH, Photos and Measurements from August CERN Trip 
|
Chamber frame width=65cm
Chamber frame height=146cm
Chamber frame length=230cm
|
|
Mon Sep 24 14:44:48 2018, DK, ISOLDE vacuum schematic
|
Attached. PDF is produced with Gnome Dia -- source file attached as well.
Bellow near GV is not depicted. None of SEC components are depicted (as they would be irrelevant with the GV in place).
|
|
Thu Aug 30 15:14:50 2018, DK, Gate Valve
|
| Some notes on the broken gate valve that should go between SEC and our chamber at XT03. |
|
Thu Aug 23 18:57:15 2018, DK, What daid is taking from ISOLDE to Edinburgh
|
1 bolt for chamber stand structure, for reference for new struts.
2 target ladders: spare 1/2 style ladder, ladder from inside chamber, including the bits to connect to actuator
|
|
Thu Aug 23 18:23:27 2018, DK, Where to find (our) stuff at ISOLDE
|
=Overview=
Shoes, hard hats, 'underpants', spiders, etc: Cardboard box "R", Garage entry of ISOLDE, shelf opposite turnstyle.
|
|
Thu Nov 23 13:16:56 2017, CLW, Beam energies
|
Beam energy measurements can be found in the electronic logbook for ISO-REX-HIE
https://op-webtools.web.cern.ch/elogbook/
measurements for all energies were: |
|
Thu Nov 16 16:24:29 2017, RG CLW MD, Run 173 Pulse Walkthrough HI n-side
|
Header: Pulser walkthrough, HI n-side, trigger on HI detector this time
Ender: Change to digital pulser to check as non-linearity was observed at low amplitudes.
====================================================
|
|
Thu Nov 16 16:14:04 2017, RG CLW MD, Run 172 Pulse Walkthrough HI n-side
|
Header: Pulser walkthrough, HI n-side
Ender: Change to digital pulser to check as non-linearity was observed at low amplitudes.
====================================================
|
|
Thu Nov 16 16:06:07 2017, RG CLW MD, Run 171 Pulse Walkthrough HI n-side
|
Header: Pulser walkthrough, HI n-side
Ender: negative pulser, rise time 0.05 us, fall time 1ms, delay .5 us,ref INT, width 0.5 us, Amplitude: 9 on
dial, no attenuation, in steps of 1 , 250 Hz
|
|
Thu Nov 16 15:57:29 2017, RG CLW MD, Run 170 Pulse Walkthrough HI p-side
|
Header: Pulser walkthrough, HI p-side
Ender: positive pulser, fall time 1ms, delay 250 ns, 10 V in steps of 1, 250 Hz
====================================================
|
|
Thu Nov 16 15:43:48 2017, RG CLW MD, Run 169 Pulse Walkthrough E n-side
|
Header: Pulser walkthrough, E n-side
Ender: negative pulser, rise time 0.05 us, fall time 1ms, delay .5 us,ref INT, width 0.5 us, Amplitude: 6 on
dial, no attenuation, in steps of 1 , 250 Hz
|
|
Thu Nov 16 15:37:35 2017, RG, MD, CLW, Run 167 JUNK
|
| |
|
Thu Nov 16 15:33:24 2017, RG CLW MD, Run 168 Pulse Walkthrough E p-side
|
Header: Pulser walkthrough, E p-side
Ender: positive pulser, fall time 1ms, delay 250 ns, 6 V in steps of 0.5, 250 Hz
====================================================
|
|
Thu Nov 16 15:24:42 2017, RG CLW MD, Run 166 Pulse Walkthrough dE n-side
|
Header: Pulser walkthrough, dE n-side
Ender: negative pulser, rise time 0.05 us, fall time 1ms, delay .5 us,ref INT, width 0.5 us, Amplitude: 7 on
dial, att. 5, in steps of 1 , 250 Hz
|
|
Thu Nov 16 15:14:39 2017, RG CLW MD, Run 165 Pulse Walkthrough dE p-side
|
Header: Pulser walkthrough, dE p-side
Ender: positive pulser, fall time 1ms, delay 250 ns, 1.6 V in steps of 0.2, 250 Hz
====================================================
|
|
Thu Nov 16 11:20:51 2017, RG CLW MD, Run 162 -HI det calibration
|
Header: 4alpha source - Heavy Ion detector calibration
Ender:
====================================================
|
|
Wed Nov 15 16:24:35 2017, RG CLW, Run 160 - strip numbering E detector
|
Header: 4alpha source off center (to the top)
Ender:
====================================================
|
|
Wed Nov 15 16:05:25 2017, RG CLW, Run 159 - E detector calibration
|
Header: 4alpha source run for E det calubration
Ender:
====================================================
|
|
Wed Nov 15 15:41:41 2017, RG CLW, Run 157 - EJunk
|
Header: 4alpha source
Ender:
====================================================
|
|
Wed Nov 15 14:18:30 2017, DK, Issues and problems encountered
|
Objective log on perceived issues. (As a benchmark, I enumerated 17 such issues on my previous RIB experiment March 2017.)
In no particular order...
|