 Thu Oct 6 14:58:29 2022, Nikolay Sosnin, Change of Pulser Delay
|
Still using pulser triggered from protons. 12 microsecond delay from protons to gamma-flash + 1.75 microsecond delay from gamma flash to pulser. 20 mV
pulser output into 50 ohm impedance (10 mV final output) of both polarities (using two pulsers, one NE pulser and one BNC PB5 pulser). Changed pulser setting
to run with 5 microsecond delay for approx. 1 hour, then change to 10 microsecond delay. |
Thu Oct 6 11:45:39 2022, Nikolay Sosnin, Assembly Setup Days 1 and 2 25x
|
| Photographs of assembly up to the first pulser test with LiF3. |
|
Thu Oct 6 11:07:47 2022, Nikolay Sosnin, Change of sample/Addition of pulser
|
Changed from LiF 4 to LiF 3 after running with LiF 4 overnight (run title on n_TOF DAQ was not updated to refelect the change, and still says LiF 4,
but the material setting of the run states correctly that hte run is with LiF 3).
Added pulser triggered from protons. 12 microsecond delay from protons to gamma-flash + 1.75 microsecond delay from gamma flash to pulser. 20 |
|
Thu Oct 6 09:34:30 2022, Claudia, Test setup Photos and cabling
|
Setup 5.10.22
dE 20 um (ID 2837-33) and 494 um double sided (ID 1194-9)
46 channels (2 connectors missing) |
|
Thu Oct 6 09:28:33 2022, Claudia, Items to be replaced for next run
|
Missing/broken items identified
- long rails for fixing chamber on support
- vacuum valve (ours is broken) |
|
Thu May 26 09:20:32 2022, Nick / Claudia, Inventory of Items at n_TOF for (n,cp) experiments
|
Detectors currently in the boxes:
2x MSL type W1(SS)-50, 2902-4 (53um), 2940-6 (55um)
1x MSL type W1(SS)-20 2837-33 (20um) |
|
Fri Sep 9 10:01:18 2016, Sarah, Leakage currents 09.09.16
|
EFED 0.04uA
DEED 0.05uA
PHDI 0.13uA |
|
Fri Sep 2 12:03:40 2016, Sarah, SPD card changed
|
| 14 bit card replaced for DEED 9-12, to prevent issue with pulser arriving before gamma flash. |
|
Fri Sep 2 12:01:57 2016, Sarah, Leakage currents 02.09.16
|
E 0.03
dE 0.05
PHDI 0.12 |
|
Tue Aug 23 15:34:38 2016, Claudia, Leakage currents 23.08.16
|
E = 0.03uA
dE = 0.04uA
PHDI = 0.09uA |
|
Wed Aug 17 15:10:05 2016, Sarah, Leakage currents 12.08.16
|
E = 0.03uA
dE = 0.04uA
PHDI = 0.06uA |
|
Thu Aug 11 08:19:37 2016, Sarah, Leakage currents 10.8.16
|
At lunchtime (12.45)
E = 0.03 uA
dE = 0.04 uA |
|
Tue Aug 9 15:57:52 2016, Sarah, Leakage currents 09.08.16
|
Morning - 9am
E= 0.03uA
dE= 0.04uA |
|
Mon Aug 8 11:02:13 2016, Sarah, Leakage currents 08.08.16
|
E 0.03 uA
dE 0.04 uA
PHDI 0.05 uA |
|
Wed Aug 3 14:48:09 2016, Sarah, Leakage currents 02.08 - 03.08
|
02.08:
dE = 0.03 uA
E = 0.03 uA |
|
Wed Aug 3 09:48:31 2016, Sarah, EFED10 alpha calibration checks
|
|
|
Tue Aug 2 08:14:26 2016, Sarah, Leakage currents spreadsheet (26/07- 01/08)
|
| Steady for dE, E. Possibly rising on PHDI- monitor closely. |
|
Sun Jul 31 15:56:32 2016, Sarah, DEED16 Alpha calibration checks (205169)
|
***note that DEED 16 was on old sampling rate for 205168- so use next run, also DEED 9-12 not plugged in***
|
|
Sun Jul 31 15:02:57 2016, Sarah, DEED6 Alpha calibration checks (205168)
|
DEED6: (1 bin = 2 ch)
Pulser (DAQ):
- Centroid = 5145.6(6) ch |
|
Sun Jul 31 14:32:34 2016, Sarah, DEED1 Alpha calibration checks (205168)
|
DEED1: (rebin x2 -> 1 bin = 4 ch)
Pulser (DAQ):
- Centroid = 5000(1) ch |