| ID |
Date |
Author |
Subject |
Text |
 |
|
133
|
Sat Dec 12 03:30:50 2015 |
Alfred, Chris, Phong | change configuration of NNAIDA modules in setup | We want to reduce the configuration of
the setup to 4 FEE cards (8 NNAIDA modules),
so we only have to isolate 4 of them from |
|
|
18
|
Fri Oct 24 16:02:26 2014 |
Alfredo Estrade | bench tests with pulser | Performed pulser measurements with test
setup at Daresbury lab, with main purpose
of remembering how to operate the system! |
|
|
908
|
Thu Oct 12 16:40:21 2023 |
TD | background alpha |
start 14.55 |
13x |
|
186
|
Tue Apr 26 06:13:00 2016 |
TD | aidas1: updated /etc/fstab file |
The aidas1 /etc/fstab file contained commented
out entries for 2 (of 3) WD 3Tb disks
|
|
|
295
|
Wed Jun 8 04:24:04 2016 |
TD | aidas1 disk statistics (without data compression) | aidas1> iostat -xn
Linux 2.6.32-504.8.1.el6.x86_64 (aidas1)
06/08/2016 _x86_64_ (16 CPU)
|
|
|
292
|
Wed Jun 8 02:31:20 2016 |
TD | aidas1 disk statistics |
DAQ running to disk at relatively low rate
(merger ~600k item/s, tapeserver ~4700kb/s)
|
|
|
194
|
Mon May 2 07:27:26 2016 |
TD | aidas1 /etc/dhcp/dhcpd.conf updated | aidas1 /etc/dhcp/dhcpd.conf update
to install two scratch FEE modules assembled |
|
|
876
|
Mon Jul 24 08:39:39 2023 |
TD | aida10 sys console output & aida10 options | Options and system cosnole disagree about
which version of the DataAcq program is in
use? |
|
|
336
|
Wed Aug 17 14:44:52 2016 |
Patrick Coleman-Smith | [HowTo] start acquisition using the new "Start ASIC Readout" button | Due to sometimes operating with very noisy
systems, both at Daresbury and RIKEN, I have
installed a change to the startup of the |
|
|
236
|
Wed May 25 18:51:54 2016 |
Patrick Coleman-Smith | [HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files | The attached firmware file, FEE_GF_Feb16_18.bin,
should be saved to /MIDAS/Aida and the FlashPgm.csh
file edited
|
|
|
237
|
Thu May 26 01:44:45 2016 |
Patrick Coleman-Smith | [HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files |
Done. Awaiting test. See attachments 1-2.
|
|
|
941
|
Tue Jan 30 14:18:16 2024 |
NH | [HowTo] Update MACB Firmware | https://elog.ph.ed.ac.uk/CARME/482 |
|
|
239
|
Thu May 26 10:03:11 2016 |
Patrick Coleman-Smith | [HowTo] Specification Document for MACB including suggested setup. | Attached is the specification for the MACB
with the settings currently available. |
|
|
234
|
Tue May 24 08:28:28 2016 |
Patrick Coleman-Smith | [HowTo] Save power if not using the Waveforms and restart the Waveforms | The USB controlled power Relays are near their
AC fuse operating limit which has caused
some Fuse failures.
|
|
|
268
|
Wed Jun 1 12:14:08 2016 |
Patrick Coleman-Smith | [HowTo] React to "Check Clock Status => FEE64 Failure" | If there are more than one failures then check
how they map to the MACB HDMI connections.
Are they all connected to the just one MACB |
|
|
559
|
Mon May 8 10:00:02 2017 |
Patrick Coleman-Smith | [HowTo] Operating document for the Pi_Monitor FEE64 console logging equipment | The operating proceedure for the Raspberry
Pi FEE64 console monitor is attached.
Please let me know if more detail |
|
|
575
|
Thu May 18 15:20:44 2017 |
Patrick Coleman-Smith | [HowTo] Connecting a USB console interface to the FEE64 | The three attachments show the orientation
of the console cable pcb relative to the
FEE64 connectors. |
|
|
942
|
Wed Mar 13 14:50:04 2024 |
NH | [HowTo] Backup and Restore Raspberry Pi SD Cards | Micro SD cards used by the raspberry pis are
cheap but prone to failing
|
|
|
331
|
Thu Jul 28 11:35:58 2016 |
Patrick Coleman-Smith | [HowTo] Apply Thermal paste to FPGA | |
|
|
240
|
Thu May 26 14:19:13 2016 |
Patrick Coleman-Smith | [HowTo] Access AIDA documentation | The latest version of the FEE64 software Interface
document ( May 2016 ) is available as a .pdf
from
|
|