 Sat Jun 17 11:00:55 2017, TD, Report - high - 'zero all histograms' doesn't
|
The DAQ Run Control 'zero all histograms' function appears to have stopped working
- an issue related to the new RunControl/sys.tcl ... ?
|
 Mon Jun 19 08:52:40 2017, TD, Report - high - 'zero all histograms' doesn't
|
>
> The DAQ Run Control 'zero all histograms' function appears to have stopped working
> - an issue related to the new RunControl/sys.tcl ... ?
|
|
Mon Jun 19 08:58:00 2017, TD, Patrick, Report - high - 'zero all histograms' doesn't
|
>
> The DAQ Run Control 'zero all histograms' function appears to have stopped working
> - an issue related to the new RunControl/sys.tcl ... ?
|
|
Wed Jan 20 16:44:02 2016, TD, Report - LOW - spectrum browser x/y expand
|
Spectrum Browser
|
|
Wed Nov 22 13:44:36 2023, NH, Report - Cannot change per-ASIC Settings
|
On ASIC settings page trynig to change the settings for one ASIC (e.g. ASIC1 of aida09) seems to cause all 4 ASIC settings to change
1. Ensure act on all FEEs and act on all ASICs unticked
|
Thu Nov 23 10:00:16 2023, NH, Report - Cannot change per-ASIC Settings 
|
> On ASIC settings page trynig to change the settings for one ASIC (e.g. ASIC1 of aida09) seems to cause all 4 ASIC settings to change
>
> 1. Ensure act on all FEEs and act on all ASICs unticked
|
|
Wed Dec 6 16:32:03 2023, NH, Replacement of faulty Honeywell HSS-DPS sensor
|
Honeywell HSS-DPS sensor is faulty - attachments 1 & 2
|
|
Wed Jan 18 14:16:47 2017, Patrick Coleman-Smith, Repaired Modules returning to RIKEN
|
Five modules are being returned to RIKEN after repair.
The MAC addresses are :-
00:04:a3:2a:ED:8f |
|
Thu Sep 25 11:35:18 2014, Patrick Coleman-Smith, Removing the MACB from the system
|
I have been wondering if the 0v path from the FEE64s to the MACB where they are joined is a possible problem.
I have been contemplating an isolated LVDS interface for the 50Mhz clock to test the idea.
Fortunately i recalled the 50Mhz internal oscillator in each FEE64. |
|
Mon Jun 6 11:17:30 2016, TD, ML & YS, Re-configure merger to ignore nnaida19
|
19.00 Power-cycled and rebooted AIDA FEE64s
|
|
Mon Apr 20 07:39:49 2015, CG, TD, Rasberry Pi : USB ac mains switch + USB serial link to FEE64 console
|
It would appear that you cannot reliably startup the Raspberry Pi (nnrpi1)
connected to both the USB ac mains switch *and* the USB-serial link to FEE64
|
|
Thu May 18 03:07:47 2017, TD, OH, CB, RasPi system console diagnostics
|
Connecting monitor to RasPi system console diagnostics
May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
|
|
Thu May 18 09:29:50 2017, TD, OH, CB, RasPi system console diagnostics
|
> Connecting monitor to RasPi system console diagnostics
>
> May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
|
|
Thu May 18 09:46:36 2017, TD, OH, CB, RasPi system console diagnostics
|
> Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
> If there is nothing to log from the consoles then the Pi won't have made a log file.
|
|
Tue Apr 28 11:22:25 2015, VP, RPI
|
replace RPI with model B+. 4 USB ports + 4 port switch
The RPI system has been replaced by a model B+ which has 4 internal USB ports |
|
Thu Dec 10 04:56:08 2015, CG, AE, RIKEN progress - first day and a half
|
08/12/15 - Day 0.5
Test fitted new snout to snout base
- the holes in the base of the just-shipped section all line up with those in the corresponding part just taken off. |
|
Thu Jan 7 13:55:24 2016, CG, RIKEN progress - 15/12/15 (late)
|
Tues 15/12/15
Swapped previously tripped detector (3131-11) on to kaptons already in place for (working) 2977-15 and attempted to bias
- i.e. made no changes (FEEs, or jumpers etc) to the known working setup of 2977-15, just replaced the detector with 3131-11 |
|
Sat Dec 12 02:12:17 2015, CG, AE, VH, RIKEN progress 9x
|
Stripped down contents of AIDA NIM bins to only what is required by AIDA.
Now have BNC PB-5 pulser, sum and invert module, single and quad Caen HV supplies in the top crate and the MACBs in the bottom crate.
Removed were FIFO, leading edge discriminator and a quad coincidence module, all used in the DAQ integration. |
|
Mon Dec 14 07:56:27 2015, CG, RIKEN progress 10x
|
13/12/15
Current jumper setup:
- detector 2977-15 connected to nnaida1,3,5,8 with GND kapton to nnaida1 |
|
Tue Mar 8 06:00:45 2016, CG, AE, RIKEN maintenance progress
|
07/03/16
The new snout doesn't fit due to the screw holes being misaligned. I am going to try modifying the old one (that was in conflict with some material
in the base) over the next couple of days. It is too long by 11mm, so if I can remove that it should then fit.. |