| ID |
Date |
Author |
Subject |
|
460
|
Sun Nov 20 02:24:53 2016 |
CG | Sunday 20 November | 11.20 FEE temps and bias leakages ok (attachments 1-3).
However, stats screen shows no SYNCs being issued and no "Good Events" (attachment 4).
Stop and Go had no effect -> SYNCs output but SYNC related system checks failed (attachment 5+6).
Carried out Reset and Setup and returned to normal operation.
17.20 FEE temps and bias leakage currents ok (attachments 7+8).
DAQ still running ok.
BigRIPS tuning through ZDS for next expt.
15cm Pb upstream of BRIKEN. |
| Attachment 1: bias1.png
|
|
| Attachment 2: bias2.png
|
|
| Attachment 3: temps.png
|
|
| Attachment 4: DAQstop_sync.png
|
|
| Attachment 5: syncs_received.png
|
|
| Attachment 6: sync_errors.png
|
|
| Attachment 7: bias1.png
|
|
| Attachment 8: bias2.png
|
|
|
580
|
Sun May 21 02:54:22 2017 |
CB, TD, OH | Sunday 21 May | 10.54 DAQ continues OK
Current file May2017/R18_208
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases; leakage currents OK - see attachment 1
FEE64 Temperatures OK - see attachment 2
good events; statistics OK - see attachment 3
No warnings/errors reported by merger since DAQ GO - see attachment 4
*all* system wide checks OK *except* ADC calibration of nnaida7
10.58 E17/F11 ambient temperature +24.6 deg C, RH 40.5%, d.p. +10.3 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)
11.00 DAQ stops OK
Current file May2017/R18_208
Deleted R17*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
11.16 DAQ starts
File May2017/R19
Ras Pi system console logs for USB0 attached - see attachment 5
18.26 DAQ continues OK
Current file May2017/R19_77
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachment 6 & 7
FEE64 Temperatures OK - see attachment 8
good events statistics OK - see attachment 9
No warnings/errors reported by merger since DAQ GO - see attachment 10
*all* system wide checks OK *except* ADC calibration of nnaida7
18.30 E17/F11 ambient temperature +24.7 deg C, RH 38.9%, d.p. +9.8 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 60%) |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: ttyUSB0
|
Flash base address=FC000000
Set Flash to ASync Mode
XFLASH_PART_NOT_SUPPORTED
Finished copying zImage to RAM
Found 0 errors checking kernel image
VHDL version number 0X01900C1F
Bootloader version number 1.2.7 -- 22nd August 2012
Starting LMK 3200 setup
Setting LMK03200 to standard clock settings -- External Clock 23Nov15
.... SPI Base Address=0x81400000
clk_control_reg=0x4
Next step is SPIconfig
Control 32(0x81400000)=0x180
SlaveSel(0x81400000)=0x3
Ctrl(0x81400000)=0xE6
Ctrl(0x81400000)=0x86
SPIconfig done now to set up the LMK3200 registers
LMK #0 : regInit[0]=0x80000000
LMK #0 : regInit[1]=0x10070600
LMK #0 : regInit[2]=0x60601
LMK #0 : regInit[3]=0x60602
LMK #0 : regInit[4]=0x60603
LMK #0 : regInit[5]=0x70624
LMK #0 : regInit[6]=0x70605
LMK #0 : regInit[7]=0x70606
LMK #0 : regInit[8]=0x70627
LMK #0 : regInit[9]=0x10000908
LMK #0 : regInit[10]=0xA0022A09
LMK #0 : regInit[11]=0x82800B
LMK #0 : regInit[12]=0x28C800D
LMK #0 : regInit[13]=0x830020E
LMK #0 : regInit[14]=0xC800180F
Calibrate completed at 941 counts
Setting Clock Control =0x0000000B, to set GOE and sync bit
Ctrl @ SPIstop (0x81400000)=0x186
0 delay setup completed at 0 counts
Finished Clock setup LMK03200
completed LMK 3200 setup
Loaded all four ASICs with default settings
Setting the ADCs into calibration mode
Control 32(0x81400400)=0x180
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86
Init : Config of AD9252 SPI ok
Ctrl @ SPIstop (0x81400400)=0x186
ADCs initialised
waiting for 10 seconds
ADCs calibrated
Control 32(0x81400400)=0x186
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86Config of AD9252 SPI ok
Ctrl @ SPIstop (0x81400400)=0x186
ADCs set for PN-9
Jumping to kernel simpleboot...
zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0)
Allocating 0x3b78cc bytes for kernel ...
gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes
Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Finalizing device tree... flat tree at 0xbd1300
Probing IIC bus for MAC... MAC address = 0x0 0x4 0xa3 0x2b 0x9 0xe8
Using Xilinx Virtex440 machine description
Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011
Zone PFN ranges:
DMA 0x00000000 -> 0x00007000
Normal 0x00007000 -> 0x00007000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00007000
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448
Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init)
Kernel virtual memory layout:
* 0xffffe000..0xfffff000 : fixmap
* 0xfde00000..0xfe000000 : consistent mem
* 0xfde00000..0xfde00000 : early ioremap
* 0xd1000000..0xfde00000 : vmalloc & ioremap
NR_IRQS:512
clocksource: timebase mult[a00000] shift[22] registered
Console: colour dummy device 80x25
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 214
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
console [ttyS0] enabled
brd: module loaded
loop: module loaded
Device Tree Probing 'ethernet'
xilinx_lltemac 81c00000.ethernet: MAC address is now 0: 4:a3:2b: 9:e8
xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
XLlTemac: DCR address: 0x80
XLlTemac: buffer descriptor size: 32768 (0x8000)
XLlTemac: Allocating DMA descriptors with kmalloc
XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
XTemac: PHY detected at address 7.
xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17
fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 5 MTD partitions on "fc000000.flash":
0x000000000000-0x000000500000 : "golden_firmware"
0x000000500000-0x000000800000 : "golden_kernel"
0x000000800000-0x000000d00000 : "user_firmware"
0x000000d00000-0x000000fe0000 : "user_kernel"
0x000000fe0000-0x000001000000 : "env_variables"
xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
SPI: XIlinx spi: bus number now 32766
xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
SPI: XIlinx spi: bus number now 32765
mice: PS/2 mouse device common for all mice
Device Tree Probing 'i2c'
#0 at 0x81600000 mapped to 0xD1030000, irq=22
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
eth0: XLlTemac: Options: 0x3fa
eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
eth0: XLlTemac: speed set to 1000Mb/s
eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 193.62.115.15, my address is 193.62.115.227
IP-Config: Complete:
device=eth0, addr=193.62.115.227, mask=255.255.255.0, gw=193.62.115.1,
host=nnaida14, domain=dl.ac.uk, nis-domain=nuclear.physics,
bootserver=193.62.115.15, rootserver=193.62.115.15, rootpath=/MIDAS/XilinxLinux/ppc_4xx/rfs/nnaida14,tcp
Looking up port of RPC 100003/2 on 193.62.115.15
Looking up port of RPC 100005/1 on 193.62.115.15
VFS: Mounted root (nfs filesystem) on device 0:12.
Freeing unused kernel memory: 168k init
INIT: version 2.86 booting
Starting sysinit...
Welcome to DENX & STFC Daresbury Embedded Linux Environment
Press 'I' to enter interactive startup.
Setting clock (utc): Thu May 4 12:41:56 CEST 2017 [ OK ]
Building the cache [ OK ]
Setting hostname nnaida14: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Finishing sysinit...
INIT: Entering runlevel: 3
Entering non-interactive startup
FATAL: Module ipv6 not found.
Bringing up loopback interface: [ OK ]
FATAL: Module ipv6 not found.
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting rpcbind: [ OK ]
Mounting NFS filesystems: [ OK ]
Mounting other filesystems: [ OK ]
Starting xinetd: [ OK ]
Starting midas: Starting MIDAS Data Acquisition for nnaida14
xaida: device parameters: base=0x81000000 size=0x200000
Trying to free nonexistent resource <0000000081000000-00000000811fffff>
xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000
xaida: driver assigned major number 254
Trying to free nonexistent resource <0000000007000000-0000000007ffffff>
AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000
AIDAMEM: aidamem: driver assigned major number 253
System identified is CPU ppc; Platform is unix; OS is Linux and Version is 2.6.31
Environment selected is CPU ppc; Platform unix; OS Linux and Operating System linux-ppc_4xx
MIDASBASE = /MIDAS and MIDAS_LIBRARY = /MIDAS/TclHttpd/linux-ppc_4xx
PATH = /MIDAS/bin_linux-ppc_4xx:/MIDAS/TclHttpd/linux-ppc_4xx:/MIDAS/linux-ppc_4xx/bin:/MIDAS/linux-ppc_4xx/bin:/sbin:/usr/sbin:/bin:/usr/bin
Computer Name = nnaida14; Temp Directory = /tmp/tcl361
package limit is not available: can't find package limit
Running with default file descriptor limit
package setuid is not available: can't find package setuid
Running as user 0 group 0
xaida: open:
AIDAMEM: aidamem_open:
/debug user "debug" password "qqitfz2zn63a"
httpd started on port 8015
Cannot use /MIDAS/config/TclHttpd/nnaida14@8015/startup.tcl
Custom startup from /MIDAS/config/TclHttpd/nnaida14/startup.tcl
XAIDA Access package 1.0
/XAIDAAccessServer
XAD9252 Access package 1.0
/XAD9252AccessServer
/RshServer
/DataBaseAccessServer
/NetVarService
/SigTaskService
Use of SpectrumServer is depricated - use DiscSasServer or MemSasServer
Loaded MemSasAccess
/SpectrumService
loading tcl/AIDARunControl.tcl for namespace ::
/DataAcquisitionControlServer
DefineMessage unknown
Run Control Server Implementation for AIDA
RunControlServer loaded
loading Html/RunControl/implementation.tcl for namespace ::
RunControl loaded
loading Html/AIDA/RunControl/implementation.tcl for namespace ::
ReadRegister failed: Name=NetVar.EXEC.ID; Code= 0x10004; Info= Register name does not exist
created SigTask registers 0 0 0 0
Created UI registers
[ OK ]
DENX ELDK version 4.2 build 2008-04-01
Linux 2.6.31 on a ppc
nnaida14 login: AIDA RunControl loaded
Completed custom startup from /MIDAS/TclHttpd/Html/AIDA/RunControl/stats.defn.tcl
executing generic doStop
EXPERIMENTS/AIDA/Options/nnaida24 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
DataAcqCommand 1 Halt
Aida state now Stopped. AidaExecV8_52: Build 170816
Halt (1)
DataAcqCommand 1 disconnect xfer stream #0
disconnect xfer stream #0 (1)
completed generic doStop
executing generic doGo
EXPERIMENTS/AIDA/Options/nnaida24 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida24 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida24/CONTENTS": permission denied
... 1799 more lines ...
|
| Attachment 6: 10.png
|
|
| Attachment 7: 11.png
|
|
| Attachment 8: 12.png
|
|
| Attachment 9: 13.png
|
|
| Attachment 10: 14.png
|
|
|
44
|
Sun Feb 22 06:47:23 2015 |
CG, AE, TD | Sunday 22 February 2015 | 22/02/15
am Testing various grounding configurations for the connection between the DSSSD and the FEE64 modules.
15.45 Obtaining error messages from Merger TTY console (see attachment 1)
1700: Summary of AM testing of grounding configurations.
Set up system as it was when we left last night to check reproducibility -> peak FWHMs all same to within 10%.
Throughout tests yesterday, nnaida8 was consistently worse than the other nnaida, why? Can it be improved?
Most obvious difference between 8 and the rest was that the nose was grounded through nnaida8.
Removed nose grounding cable and left to hang -> no appreciable difference in FWHMs.
It was then attached to the Cu piping using a croc clip -> no change.
Connected to nnaida6 -> no change.
The heavy duty Cu braiding was removed from all nnaida and the pulser FWHM in all nnaida increase significantly.
=> clearly the braiding is helping.
Put Cu braiding back in place and added shielding plates to nnaida1,3,8 (kapton in way on nnaida5/6, also useful as a reference point).
Each shield plate was fit onto the set screws with two spacers and sat over the kaptons, black tape was put over the vias to prevent them touching the plates.
No change with respect to the first measurements this morning.
=> the grounding changes implemented today have had no effect at the current noise level, but that is not to say they may not have an effect in combination with production detectors, new kaptons etc.
1715: Tested the new USB mains power switches for function (without load). All seem to function correctly and are controllable from the RPi.
|
| Attachment 1: Screenshot.png
|
|
|
679
|
Sun Oct 22 02:10:03 2017 |
OH | Sunday 22 October | 10:10 DAQ found crashed
Stopped writing to file at 05:31
System wide checks ok
Statistics - Attachment 1
FEE temperatures - Attachment 2
Error message when stopping the DAQ - Attachment 3
Bias and leakage currents ok - Attachment 4
10:18 Error when trying to reset and setup DAQ - Attachment 5
Followed by:
STATE for nnaida1 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida1:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida1:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida2 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida2:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida2:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida3 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida3:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida3:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida4 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida4:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida4:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida5 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida5:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida5:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida6 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida6:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida6:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida7 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida7:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida7:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
STATE for nnaida8 returned with an error
connect failed
NONE
connect failed
while executing
"::http::geturl http://nnaida8:8015/DataAcquisitionControlServer -headers {} -type text/xml -timeout 20000
-query {<?xml version="1.0" encoding="UTF-8"..."
("eval" body line 1)
invoked from within
"eval [list ::http::geturl $url] $args"
(procedure "::http::geturl_followRedirects" line 4)
invoked from within
"::http::geturl_followRedirects http://nnaida8:8015/DataAcquisitionControlServer -headers {} -type text/xml
-timeout 20000 -query {<?xml version="1.0" ..."
("eval" body line 1)
invoked from within
"eval ::http::geturl_followRedirects [list $url] -headers [list $local_headers] -type text/xml -timeout
$timeout -query [list $request] $local_pro..."
(procedure "::SOAP::Transport::http::xfer" line 61)
invoked from within
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControl
10:26 Unable to recover from crash by restarting the merger
FEEs turned off. Will leave off whilst changing the adapter boards
11.28 Power up all FEE64s - 20s between each relay
11.46 Pi Monitor Browser reports all FEE64s 'Finished OK', all FEE64s '0 panics'
15:12 Waveforms of FEEs 5,6,9,10,17,18,13,14 showing the change in Ibias LF feedback value
First attachment will be waveform with LF 0x8 and second will be 0xF
FEE13 has only one as was on the rails at anything above 0x8 - Attachments 6-20
Waveforms for FEEs 19 and 20 for comparisons - Attachments 21 & 22
Attachment FEE Change
6 5 default
7 5 LF 0xf
8 6 default
9 6 LF 0xf
10 9 default
11 9 LF 0xf
12 10 default
13 10 LF 0xf
14 17 default
15 17 LF 0xf
16 18 default
17 18 LF 0xf
18 13 default
19 14 default
20 14 LF 0xf
21 19 default
22 20 default
16:02 New ASIC settings folder 2017Oct22-15.59.25
Settings changed related to A and C FEEs in which Ibias LF Feedback has been changed to LF0x8 for all
with the exception of FEE 2 which is set to 0xC and 14 which is set to 0x8
ASIC 1 of nnaida14 has a SC threshold of 0x20
All of nnaida 13 has a SC threshold of 0xf
Stats running in these setting - Attachment 23
System wide checks ok
FEE temperatures ok - Attachment 24
Leakage and bias ok - Attachment 25
16.16 Start Oct17/R7
Background alpha activity
BNC PB-4 Pulser OFF
ASIC settings per 2017Oct22-15.59.25 |
| Attachment 1: 221017_1010_stats.png
|
|
| Attachment 2: 221017_1011_feetemp.png
|
|
| Attachment 3: 221017_1013_error.png
|
|
| Attachment 4: 221017_1015_bias.png
|
|
| Attachment 5: 221017_1018_errorsetup.png
|
|
| Attachment 6: 221017_1439_waveform5.png
|
|
| Attachment 7: 221017_1440_waveform5LF0xf.png
|
|
| Attachment 8: 221017_1441_waveform6.png
|
|
| Attachment 9: 221017_1442_waveform6LF0xf.png
|
|
| Attachment 10: 221017_1443_waveform9.png
|
|
| Attachment 11: 221017_1444_waveform9LF0xf.png
|
|
| Attachment 12: 221017_1445_waveform10.png
|
|
| Attachment 13: 221017_1447_waveform10LF0xf.png
|
|
| Attachment 14: 221017_1450_waveform17.png
|
|
| Attachment 15: 221017_1452_waveform17_LF0xf.png
|
|
| Attachment 16: 221017_1454_waveform18.png
|
|
| Attachment 17: 221017_1455_waveform18LF0xf.png
|
|
| Attachment 18: 221017_1457_waveform13.png
|
|
| Attachment 19: 221017_1503_waveform14lfx08.png
|
|
| Attachment 20: 221017_1504_waveform14LF0xf.png
|
|
| Attachment 21: 221017_1508_waveform19.png
|
|
| Attachment 22: 221017_1511_waveform20.png
|
|
| Attachment 23: 221017_1558_stats.png
|
|
| Attachment 24: 221017_1607_feetemp.png
|
|
| Attachment 25: 221017_1608_bias.png
|
|
|
875
|
Sun Jul 23 08:50:48 2023 |
TD | Sunday 23 July | 09.50 Cooknell HV2
2x + polarity, grounded HV channels
+ bias - core aida04, braid aida12, LK1 ( HV local ground ) fitted aida12, aida03, aida11
bias bonds aida01 and aida09 probably broken
aida03 LK3 ( DSSSD PCB ground ) fitted
AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV
DSSSD #1 - adaptor PCB ribbon cable drain wires connected to respective adaptor PCB ground
DSSSD #2 ( not installed ) adaptor PCB ribbon cable and ribbon cable drain wires floating
AIDA Half rev B adaptor PCBs DSSSD#1 - FEE64 cooling plate - adaptor PCB ground *not* connected
AIDA Half rev A adaptor PCBs aida06 & aida08 - not connected to ribbon cable/test/HV - FEE64 cooling plate - adaptor PCB ground fitted
ground to AIDA support frame *not* connected
test + / test - *not* connected
DSSSD#1 3208-3/-21/-22
bias +100V leakage current +8.7uA - attachments 1-11
per FEE64 1.8.W spectra 20us & 200us FSR
09.58 + bias - core aida04, braid aida12, LK1 ( HV local ground ) *not* fitted aida12 & fitted aida03, aida11
see attachments 12-14
17.00 aida04 *only* adaptor PCB connected to AIDA support frame
FEE64 ADC data item stats > 200k for all FEE64s
17.45 FEE64 spower cycled
CAEN N1419ET
Internal LK installed - all outputs grounded
bias +100V leakage current +12.2uA - attachments 15-19
+ bias - core aida04, braid aida12, LK1 ( HV local ground ) *not* fitted aida12 & fitted aida03, aida11 |
| Attachment 1: Screenshot_from_2023-07-23_09-52-37.png
|
|
| Attachment 2: Screenshot_from_2023-07-23_09-52-24.png
|
|
| Attachment 3: Screenshot_from_2023-07-23_09-52-13.png
|
|
| Attachment 4: Screenshot_from_2023-07-23_09-52-08.png
|
|
| Attachment 5: Screenshot_from_2023-07-23_09-52-04.png
|
|
| Attachment 6: Screenshot_from_2023-07-23_09-51-59.png
|
|
| Attachment 7: Screenshot_from_2023-07-23_09-47-59.png
|
|
| Attachment 8: Screenshot_from_2023-07-23_09-47-38.png
|
|
| Attachment 9: Screenshot_from_2023-07-23_09-47-00.png
|
|
| Attachment 10: Screenshot_from_2023-07-23_09-46-35.png
|
|
| Attachment 11: Screenshot_from_2023-07-23_09-45-59.png
|
|
| Attachment 12: Screenshot_from_2023-07-23_09-58-06.png
|
|
| Attachment 13: Screenshot_from_2023-07-23_09-57-30.png
|
|
| Attachment 14: Screenshot_from_2023-07-23_09-57-15.png
|
|
| Attachment 15: Screenshot_from_2023-07-23_17-44-45.png
|
|
| Attachment 16: Screenshot_from_2023-07-23_17-43-57.png
|
|
| Attachment 17: Screenshot_from_2023-07-23_17-43-46.png
|
|
| Attachment 18: Screenshot_from_2023-07-23_17-43-25.png
|
|
| Attachment 19: Screenshot_from_2023-07-23_18-01-34.png
|
|
|
399
|
Sun Oct 23 02:34:12 2016 |
TD | Sunday 23 October | 10.34 DAQ found stopped, no merger error messages
Most recent file R74_296, last accessed 06.31
R70_315 ADC data synchronised
DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
Some merger errors - see attachment 4
Restart merger OK
DAQ STOP OK
DAQ RESET & SETUP OK
ReSYNC OK
System-wide checks OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
10.42 DAQ start (R75)
nnaida11 drops data transfer #1 tag at SAQ GO
DAQ STOP OK
DAQ RESET & SETUP OK
ReSYNC OK
System-wide checks OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
10.46 DAQ start (R76)
18.18 DAQ found stopped
Most recent file R76_29 last accessed 11.52
Merger crashed - see attachment 5
aidas1> ./analyser /TapeData//Sept2016/R76_29
*** GREAT format 3.2.2 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 24384
ADC data format: 197754460 ( 1539809.2 Hz)
Other data format: 1194596 ( 9301.7 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 74 ( 0.6 Hz)
RESUME: 74 ( 0.6 Hz)
SYNC100: 1172671 ( 9131.0 Hz)
FEE64 disc: 18000 ( 140.2 Hz)
MBS info: 3777 ( 29.4 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 190 ( 1.5 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 128.428 s
FEE elapsed dead time(s)
1 0.000
2 0.007
3 0.000
4 0.000
5 0.674
6 2.583
7 0.000
8 0.000
9 0.000
10 0.000
11 0.000
12 0.000
13 0.000
14 0.000
15 0.276
16 0.124
17 0.435
18 0.050
19 0.622
20 0.009
21 0.000
22 0.000
23 0.352
24 0.000
25 0.000
26 0.000
27 0.000
28 0.000
29 0.000
30 0.000
31 0.000
32 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS
Other HEC Data
0 0 0 0 0 0 0 0 0 0
0 0
1 566974 49807 0 0 0 0 48983 824 0
0 62
2 5617753 50240 0 0 2 2 48984 1252 0
0 0
3 4298949 49615 0 0 0 0 48983 632 0
0 0
4 1980475 48985 0 0 0 0 48985 0 0
0 0
5 31381665 53750 0 0 12 12 48726 5000 0
0 0
6 35397222 52131 0 0 12 12 48004 326 3777
0 0
7 3679182 48987 0 0 0 0 48987 0 0
0 0
8 3893833 49613 0 0 0 0 48983 630 0
0 0
9 4909194 49313 0 0 0 0 48987 326 0
0 0
10 4099868 50957 0 0 0 0 48984 1973 0
0 0
11 1590517 49623 0 0 0 0 48987 636 0
0 0
12 2103665 48985 0 0 0 0 48985 0 0
0 0
13 3909540 50385 0 0 0 0 48990 1395 0
0 0
14 5011678 49344 0 0 0 0 48988 356 0
0 0
15 8074527 48904 0 0 10 10 48883 1 0
0 2
16 8822855 48949 0 0 5 5 48939 0 0
0 0
17 11581998 49241 0 0 10 10 48820 401 0
0 0
18 17158740 50227 0 0 1 1 48968 1257 0
0 0
19 14684270 49399 0 0 11 11 48747 630 0
0 0
20 6793305 47946 0 0 1 1 47944 0 0
0 0
21 4052765 50377 0 0 0 0 48986 1391 0
0 126
22 1773964 49339 0 0 0 0 48988 351 0
0 0
23 10790840 48872 0 0 10 10 48852 0 0
0 0
24 5580681 49607 0 0 0 0 48988 619 0
0 0
25 0 0 0 0 0 0 0 0 0
0 0
26 0 0 0 0 0 0 0 0 0
0 0
27 0 0 0 0 0 0 0 0 0
0 0
28 0 0 0 0 0 0 0 0 0
0 0
29 0 0 0 0 0 0 0 0 0
0 0
30 0 0 0 0 0 0 0 0 0
0 0
31 0 0 0 0 0 0 0 0 0
0 0
32 0 0 0 0 0 0 0 0 0
0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undef-d Samples
0 0 0 0 0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0 0
*** Program elapsed time: 3.586s ( 6799.896 blocks/s, 424.993 Mb/s)
Restart merger OK
DAQ STOP OK
DAQ RESET & SETUP OK
ReSYNC OK
System-wide checks OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
18.50 DAQ starts (R77)
19.17 DAQ stalled due to disk housekeeping
Restart merger OK
DAQ STOP fails - nnaida1 timeout
Power cycle FEE64s
19.47 DAQ starts (R78) |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
|
722
|
Sun Jun 24 01:40:08 2018 |
OH, TD | Sunday 24 June 2018 |
09.38 DAQ continues OK
DAQ stop June18/R5_8
Detector biases & leakage currents OK - see attachments 1 & 2
Ambient temperature +25.3 deg C, d.p. +9.4 deg C, RH 36.4%
FEE64 temperatures OK - see attachment 3
System-wide checks OK *except*
nnaida25 failed global clock check code 6
failed ADC calibration
Analysis June18/R5_8 - see attachment 4
10.00 *all* slow comparator thresholds 0x64 -> 0xa
BNC PB-4 pulser ON
per FEE64 1.8.W spectra - 20us & 200us range - see attachments 5-8
14:16 FEE Module nnaida25 & nnaida26 replaced
nnaida25 2b:09:da -> 2b:09;e7
nnaida26 2b:11:c5 -> 2b:22:55
System-wide checks OK *except*
nnaida21 failed global clock check code 6
failed ADC calibration
nnaida28 failed global clock check code 6
failed ADC calibration
511
Since replacing histograming has begun working for all FEE64s and rates across detectors seem lower
Waveforms of FEEs attachments 10 & 11
ADC Rates - attachment 12
Good event statistics - attachment 13
14.28 per FEE64 1.8.W spectra - 200us range - see attachments 14 & 15
17:06 Thresholds at 0x64 across all FEEs
Alpha run started R8 |
| Attachment 1: 30.png
|
|
| Attachment 2: 31.png
|
|
| Attachment 3: 32.png
|
|
| Attachment 4: R5_8
|
*** TDR format 3.3.0 analyser - TD - June 2017
*** ERROR: READ I/O error: 5002
blocks: 11240
ADC data format: 64983208 ( 29683.2 Hz)
Other data format: 26720938 ( 12205.6 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 26720732 ( 12205.6 Hz)
FEE64 disc: 206 ( 0.1 Hz)
MBS info: 0 ( 0.0 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 57137171 ( 26099.2 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 2189.228 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.000 0.000
2 0.000 0.000
3 0.000 0.000
4 0.000 0.000
5 0.000 0.000
6 0.000 0.000
7 0.000 0.000
8 0.000 0.000
9 0.000 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.000 0.000
15 0.000 0.000
16 0.000 0.000
17 0.000 0.000
18 0.000 0.000
19 0.000 0.000
20 0.000 0.000
21 0.000 0.000
22 0.000 0.000
23 0.000 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 28 835068 0 0 0 0 835044 24 0 0 0
2 28 835030 0 0 0 0 835030 0 0 0 0
3 3 835029 0 0 0 0 835026 3 0 0 0
4 1 835008 0 0 0 0 835008 0 0 0 0
5 22 835047 0 0 0 0 835044 3 0 0 0
6 17 835039 0 0 0 0 835022 17 0 0 0
7 7 835013 0 0 0 0 835011 2 0 0 0
8 7 835005 0 0 0 0 835000 5 0 0 0
9 22 835055 0 0 0 0 835024 31 0 0 0
10 23 835051 0 0 0 0 835026 25 0 0 0
11 2 835037 0 0 0 0 835037 0 0 0 0
12 13 835036 0 0 0 0 835030 6 0 0 0
13 24 835036 0 0 0 0 835032 4 0 0 0
14 15 835035 0 0 0 0 835034 1 0 0 0
15 7 835026 0 0 0 0 835017 9 0 0 0
16 12 835030 0 0 0 0 835021 9 0 0 0
17 23 835036 0 0 0 0 835026 10 0 0 0
18 6751123 835027 0 0 0 0 835022 5 0 0 0
19 8 835021 0 0 0 0 835009 12 0 0 0
20 14 835016 0 0 0 0 835015 1 0 0 0
21 21 835012 0 0 0 0 834999 13 0 0 0
22 15 835033 0 0 0 0 835029 4 0 0 0
23 7 835036 0 0 0 0 835020 16 0 0 0
24 3 835027 0 0 0 0 835021 6 0 0 0
25 57526389 835023 0 0 0 0 835023 0 0 0 57137171
26 705304 835034 0 0 0 0 835034 0 0 0 0
27 6 835020 0 0 0 0 835020 0 0 0 0
28 4 835037 0 0 0 0 835037 0 0 0 0
29 12 835015 0 0 0 0 835015 0 0 0 0
30 21 835018 0 0 0 0 835018 0 0 0 0
31 21 835018 0 0 0 0 835018 0 0 0 0
32 6 835020 0 0 0 0 835020 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** MBS Timewarps
FEE
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
11 0
12 0
13 0
14 0
15 0
16 0
17 0
18 0
19 0
20 0
21 0
22 0
23 0
24 0
25 0
26 0
27 0
28 0
29 0
30 0
31 0
32 0
*** Program elapsed time: 1.969s ( 5709.207 blocks/s, 356.825 Mb/s)
|
| Attachment 5: 40.png
|
|
| Attachment 6: 41.png
|
|
| Attachment 7: 42.png
|
|
| Attachment 8: 43.png
|
|
| Attachment 9: 50.png
|
|
| Attachment 10: 60.png
|
|
| Attachment 11: 61.png
|
|
| Attachment 12: 62.png
|
|
| Attachment 13: 63.png
|
|
| Attachment 14: 70.png
|
|
| Attachment 15: 71.png
|
|
|
72
|
Sun Apr 26 02:28:59 2015 |
JA, LHB, TD, AE & CG | Sunday 26 April 2015 |
Upstream, 207Bi source
DSSSD #1 nnaida 6 & 9 (p+n), nnaida 11 & 16 (n+n)
DSSSD #2 nnaida 2 & 5 (p+n), nnaida 4 & 7 (n+n)
DSSSD #3 nnaida 1 & 14 (p+n), nnaida 3 & 8 (n+n)
N/C nnaida 10 & 13 (p+n), nnaida 12 & 15 (n+n)
3x MSL type BB18(DS)-1000 DSSSDs connected via 12x flexible Kapton PCB cables to 8x adaptor PCBs
Hit patterns show attachments 1-16
Default ASIC parameters *except* slow comparator 0x10 -> 0x20
Example ASIC configuration attachment 17
Example 'Good Events' statistics attachment 18
ASIC #1 waveforms of nnaida 1 - 16 enabled
Example waveform for p+n and n+n strips of each DSSSD attachments 19-24
Parameters saved to: /MIDAS/DB/EXPERIMENTS/AIDA/2015Apr26-10.56.40
12.10 Removing bias gnd jumper from p+n adaptor PCBs increases amplitude of ~100kHz RFI/EMI
(attachment 25)
15.20 Reduce DSSSD configuration to 1x DSSSD using 4x adaptor PCBs + heavy duty copper braid
DSSSD #2 nnaida 2 & 14 (p+n), nnaida 4 & 7 (n+n)
attachments 26-33 show example preamp traces and ASIC#1 spectra
similar stability/performance to previous tests with a single DSSSD, typical pulser
peak widths ~130-200 ch FWHM
AIDA snout drain wire - no obvious difference if connected, or not (as before)
15.40 DSSSD configuration 2x DSSSD using 8x adaptor PCBs
DSSSD #2 nnaida 2 & 14 (p+n), nnaida 4 & 7 (n+n) + heavy duty copper braid
DSSSD #1 nnaida 6 & 10 (p+n), nnaida 11 & 16 (n+n) + black jumper cables from above adaptor PCBs
to these adaptor PCBs
Detector bias from N1419 and N1419B, i.e. separate NIM modules => separate floating grounds
similar or improved performance to 1x DSSSD test, typical pulser peak widths ~115-250 ch FWHM
16.15 CG smartphone camera pictures of front end config
16.30 data to disk - file /Tapedata/May2015/R3_0.gz (BNC Pb-4 25Hz + 207Bi source)
17.30 Detector bias from N1419, i.e. both detector biases from same NIM module => same floating ground
for both DSSSDs
Similar performance to case above (separate NIM modules)
17.46 data to disk - file /Tapedata/May2015/R4_0.gz (BNC Pb-4 25Hz + 207Bi source) |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: 6.png
|
|
| Attachment 7: 7.png
|
|
| Attachment 8: 8.png
|
|
| Attachment 9: 9.png
|
|
| Attachment 10: 10.png
|
|
| Attachment 11: 11.png
|
|
| Attachment 12: 12.png
|
|
| Attachment 13: 13.png
|
|
| Attachment 14: 14.png
|
|
| Attachment 15: 15.png
|
|
| Attachment 16: 16.png
|
|
| Attachment 17: 17.png
|
|
| Attachment 18: 18.png
|
|
| Attachment 19: 1w.png
|
|
| Attachment 20: 4w.png
|
|
| Attachment 21: 5w.png
|
|
| Attachment 22: 8w.png
|
|
| Attachment 23: 9w.png
|
|
| Attachment 24: 11w.png
|
|
| Attachment 25: 9w-bias-jumper.png
|
|
| Attachment 26: 2w-1.png
|
|
| Attachment 27: 4w-1.png
|
|
| Attachment 28: 7w-1.png
|
|
| Attachment 29: 14w-1.png
|
|
| Attachment 30: 2-1.png
|
|
| Attachment 31: 4-1.png
|
|
| Attachment 32: 7-1.png
|
|
| Attachment 33: 14-1.png
|
|
|
813
|
Sun May 26 04:14:27 2019 |
TD | Sunday 26 May | 12.14 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
Water level c. 60% M-H markers
Temperature +25.8 deg C dew point +6.7 deg C RH 29.6%
DAQ continues OK to file May19/R11_5
alpha background
ASIC settings 2019May19-17.54.03
slow comparator 0x64
BNC PB-4 Pulser OFF
all system wide checks OK *except* nnaida7 fails ADC calibration
detector biases & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
good event statistics OK - see attachments 4
Merger OK - see attachment 5
TapeServer OK - see attachment 6
1.8.L spectra - see attachments 7 & 8
p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
n+n FEE64s 1.8.W spectra 20us FSR - attachment 10
12.26 analysis of May19/R11_5 - see attachments 11
deadtime OK
ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104)
Also observed at a much lower rate for nnaida1 & nnaida2
Check ASIC Control *all* ASICs & FEE64s |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: 6.png
|
|
| Attachment 7: 7.png
|
|
| Attachment 8: 8.png
|
|
| Attachment 9: 9.png
|
|
| Attachment 10: 10.png
|
|
| Attachment 11: R11_5
|
*** MIDAS TDR format 3.3.0 AIDA data analyser - TD - May 2019
*** ERROR: READ I/O error: 5002
blocks: 26244
ADC data format: 2012471 ( 87.3 Hz)
Other data format: 212138569 ( 9207.3 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 210939364 ( 9155.3 Hz)
FEE64 disc: 508005 ( 22.0 Hz)
MBS info: 691200 ( 30.0 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 56 ( 0.0 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 23040.203 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.000 0.000
2 0.000 0.000
3 0.000 0.000
4 0.000 0.000
5 0.000 0.000
6 0.000 0.000
7 0.000 0.000
8 0.000 0.000
9 0.000 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.000 0.000
15 0.000 0.000
16 0.000 0.000
17 0.000 0.000
18 0.000 0.000
19 0.000 0.000
20 0.000 0.000
21 0.000 0.000
22 0.000 0.000
23 0.000 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS Other HEC Data
0 0 0 0 0 0 0 0 0 0 0 0
1 85016 9295255 0 0 0 0 8789140 506115 0 0 55
2 142243 8789316 0 0 0 0 8789140 176 0 0 0
3 85 8789194 0 0 0 0 8789140 54 0 0 0
4 70 8789204 0 0 0 0 8789140 64 0 0 0
5 1483572 8789207 0 0 0 0 8789140 67 0 0 0
6 298562 9480383 0 0 0 0 8789140 43 691200 0 0
7 89 8789185 0 0 0 0 8789140 45 0 0 0
8 73 8789199 0 0 0 0 8789141 58 0 0 0
9 237 8789317 0 0 0 0 8789141 176 0 0 0
10 235 8789435 0 0 0 0 8789141 294 0 0 0
11 87 8789207 0 0 0 0 8789141 66 0 0 0
12 91 8789233 0 0 0 0 8789140 93 0 0 0
13 223 8789179 0 0 0 0 8789140 39 0 0 0
14 236 8789209 0 0 0 0 8789140 69 0 0 0
15 84 8789140 0 0 0 0 8789140 0 0 0 0
16 72 8789229 0 0 0 0 8789140 89 0 0 0
17 261 8789218 0 0 0 0 8789140 78 0 0 0
18 245 8789178 0 0 0 0 8789140 38 0 0 1
19 84 8789170 0 0 0 0 8789140 30 0 0 0
20 157 8789276 0 0 0 0 8789140 136 0 0 0
21 222 8789201 0 0 0 0 8789140 61 0 0 0
22 303 8789244 0 0 0 0 8789140 104 0 0 0
23 145 8789212 0 0 0 0 8789140 72 0 0 0
24 79 8789178 0 0 0 0 8789140 38 0 0 0
25 0 0 0 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0 0 0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** MBS Timewarps
FEE
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
11 0
12 0
13 0
14 0
15 0
16 0
17 0
18 0
19 0
20 0
21 0
22 0
23 0
24 0
25 0
26 0
27 0
28 0
29 0
30 0
31 0
32 0
*** Program elapsed time: 12.793s ( 2051.439 blocks/s, 128.215 Mb/s)
|
|
535
|
Sun Mar 26 03:53:43 2017 |
CG, OH | Sunday 26th March | 10.30 Left DAQ running overnight to look for alphas in DSSDs.
DSSD bias still ok @ 23.3oC (see att. 1).
FEE temps ok.
Slow and fast comparator thresholds set to 0x60 (~1Mev).
No obvious alphas (see att. 2+3).
11.00 Looked at waveforms and see long ripple (period ~10us) in a lot of the FEEs, e.g. nnaida15 in attachment 4. |
| Attachment 1: bias_260317.png
|
|
| Attachment 2: nniada15_w_260317.png
|
|
|
476
|
Sat Nov 26 15:32:38 2016 |
TD, AE, CG, DK | Sunday 27 November | 00.33 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
00.34 DAQ continues (RIBF03R1/R10)
ASIC settings 2016Nov17-10.50.10
BNC PB-4 pulser
Amplitude 90,000
x5 attenuator IN
frequency 25Hz range
t_r 50ns, tau_d 50us
polarity -, tail pulse, delay MIN, INT ref
good events - see attachment 4
N.B. 5x FEE64s > 100k data items/s - intrinsic/extrinsic noise has changed cf. 0x FEE64s previously
00.50 SyncCheck - see attachment 5
Two peaks for RIBF-AIDA, one peak for BRIKEN-AIDA => RIBF issue?
Merge statistics - see attachments 6-11
00.56 All system-wide checks OK - except clock status - see attachment 12
Note - clock status fails show bit 2 set
01.02 Visual scaler - see attachment 13
03.00 Beam stopped temporarily.
File R10_142 @ ~ 1.5Gb.
Beam returned ~03.06. Near end of file R10_147.
05.57 Bias and leakage currents ok (attachments 14+15).
06.25 R10 (@R10_211) stopped in anticipation of LN2 fill.
07.11 Successfully restarted DAQ after LN2 fill.
Started run R11.
07.18 Beam stopped to change stripper foil.
End of R11_1.
DAQ also stopped as I typed this.
07.53 Beam returned.
08.01 R12 started on 1GeV setting to look at suspicious data in high LEC/low HEC ranges.
Will run this for ~30mins.
(NB: Threshold of 0x20 was not changed so...)
(DK arrives on shift)
08.21 Data size of R12 very small, but maybe to be expected as the low gain usually contains ~10k counts which
is now suppressed?
Offline analysis show no implants, even in the low gain portion. Strange!
Redo this test again later today if possible
08.50 Stop R12
Change the medium energy back to low energy
08.55 Start R13 with low and high energy modes
The data stops writing to disk for some reason
09.05 Switch the degrader condition: was degraders 2 & 3, now degraders 1 & 2
Liu and Alfredo had found one 40Mg event (it seems we have about 1 such event per hour)
However, it was only implanted into DSSD #1, so we want to implant 40Mg deeper (N=1 statistics, woohoo)
So now, 0.5 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)
09.14 Run takes a moment to begin (data transfer links on FEE 3 and 4 dropped out briefly). R14 now.
09.39 Data writing stopped. We re-sequence the merger (toggle data transfer on all FEE64s), and start run R15.
09.43 R15 stops writing to disc. All system checks still passed, but not writing.
Restart merger but lose contact with nnaida14.
09.50 Power cycle FEEs.
10.20 Start run R16 -- garbage
nnaida13 refuses to calibrate ADCs
Maybe miscommunication with BRIKEN team?
When we restart, they need to reload parameters, and then they cannot see our sync (or we are actually not
sending it?)
10.25 Start run R17
Still the time stamp from AIDA is not visible on the sync check?
One of the Check ASIC Control tests returned something other than OK
(sorry, we did not copy it)
But trying it again (w/o other changes), then it returned the default OK values.
BRIKEN is not synced with BigRIPS? They don't know if it gets syncs from AIDA or not
All AIDA sync checks appear as normal, however
10.36 BRIKEN and AIDA seem to now be synchronized (we did nothing on the AIDA side)
It is unclear if we are sync'd with BigRIPS.
Stop this run to get aligned with BRIKEN
10.41 Start R18. Checks on ASICs and SYNC come back good.
Degrader settings (not changed): 3 mm Pb,; 0.5 mm W (+1 mm Al); 0.3 mm W (+1 mm Al)
F11 plastic rate 8 cps
BigRIPS run 1026; started 10:27
(CG leaves shift)
(TD arrives)
12.28: BigRIPS run number 1028
12.58 Checking the synchronization, and it is not correct.
R18_28: BRIKEN issues a new synchronization signal
13.25 Merger stops
Merger error messages for Q 23 (nnaida24) - see attachment 16
nnaida24 reboots c. 13:31 - see attachment 17
Request DAQ STOP, restart Merger
DAQ stops OK
Request DAQ RESET & SETUP
R19 started for AIDA, but we never get the full data links (junk)
13.54 nnaida15 did not show data transfer -> merger restarted
Now R20_0, DAQs look good, BRIKEN issued resync
BigRIPS run 1028 still
14.00 SyncCheck see attachment 18
good events statistics - see attachment 19 - rates lower than observed yesterday, not clear why
|
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: synccheck.png
|
|
| Attachment 6: 10.png
|
|
| Attachment 7: 11.png
|
|
| Attachment 8: 12.png
|
|
| Attachment 9: 13.png
|
|
| Attachment 10: 14.png
|
|
| Attachment 11: 15.png
|
|
| Attachment 12: 6.png
|
|
| Attachment 13: 7.png
|
|
| Attachment 14: bias1.png
|
|
| Attachment 15: bias2.png
|
|
| Attachment 16: 100.png
|
|
| Attachment 17: 101.png
|
|
| Attachment 18: 33.png
|
|
| Attachment 19: 102.png
|
|
|
483
|
Sun Nov 27 06:35:47 2016 |
TD, DK, AE | Sunday 27 November - part 2 | 14.15 BigRIPS run number is now 1029
15.22 BigRIPS run number is now 1030
15.36 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
DAQ continues (RIBF03R1/R20)
Degrader 3mm Pb fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al) variable
ASIC settings 2016Nov17-10.50.10
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
freq 25Hz range
t_r 50ns, tau_d 50us
polarity -, int ref, delay MIN, tail pulse
15.43 System-wide checks OK *except* clock status errors from amongst nnaida5, 7, 8, 15 & 16 - bit 2 always set
15.46 Visual scalers - see attachment 4
16.04 Accelerator group wants to change the carbon stripper foil -- beam stop
Run stop (R20_27 at the end)
16.10 Ambient temperature +25.2 deg C, d.p. +2.6 deg C, RH 23.8%
16.17 BigRIPS run 1031 is junk
16:17 Added 1 mm Al plate to the front of the 3 mm Pb degrader (on the upstream side of PE wall)
Pb bricks stacked between MUSIC1 and MUSIC2.
Not enough time to measure it because of quick foil change
Basically, about 10 cm thick, and it has a ~7 cm +/- 1 mm window in X, and no cut in Y (it is above and
below MUSIC window)
16:19 Start AIDA run R21. BRIKEN run started. BRIKEN Sync issued.
16.22 BigRIPS run 1032
16.26 SyncCheck - see attachment 5
17:01 AIDA merger stopped. When attempting to stop the Run, the following error is issued:
STATE for nnaida1 returned with an error
error: SOAP http transport timed out after 20000 ms
NONE
error: SOAP http transport timed out after 20000 ms
while executing
"$transport $procVarName $url $req"
(procedure "::SOAP::invoke" line 18)
invoked from within
"::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState"
("eval" body line 1)
invoked from within
"eval ::SOAP::invoke ::SOAP::_DataAcquisitionControlClient__GetState $args"
(procedure "DataAcquisitionControlClient__GetState" line 1)
invoked from within
"DataAcquisitionControlClient__GetState"
Going through hardware checks, the check sync errors since baseline gets 23/24 failures (nnaida6 is still my friend)
Perform TimeStamp RESYNC -> all can pass the check
17:17 AIDA looks happy now. R22 started.
18.16 System-wide checks OK *except* clock status errors from amongst nnaida5, 7, 8, 15 & 16 - bit 2 always set
and ADC calibration fails nnaida13
18.27 DAQ stops OK
Soft reset following LN2 refill cycle
18.33 BigRIPS 1034
18.56 DAQ starts (RIBF03R1/R23)
Degrader (3mm Pb + 1mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al) variable
ASIC settings 2016Nov17-10.50.10
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
freq 25Hz range
t_r 50ns, tau_d 50us
19.02 BRIKEN issue correlation scaler reset request
SyncCheck OK - see attachment 6
Visual scaler, 1.8.L & 1.8.W spectra, good events stats - see attachments 7-12
1.8.L pulser peak widths
Peak width = 66.76+/- 0.7221
Peak width = 178.72+/- 2.5140
Peak width = 75.37+/- 0.9037
Peak width = 76.21+/- 0.6630
Peak width = 70.19+/- 0.6772
Peak width = 66.65+/- 0.8516
Peak width = 91.90+/- 0.8132
Peak width = 69.90+/- 1.169
Peak width = 73.73+/- 0.6390
Peak width = 73.01+/- 0.7860
Peak width = 81.35+/- 0.7306
Peak width = 84.03+/- 0.8589
Peak width = 77.27+/- 1.2263
Peak width = 78.92+/- 1.2343
Peak width = 76.99+/- 1.1963
Peak width = 68.85+/- 1.7060
Peak width = 82.37+/- 1.2500
Peak width = 84.83+/- 1.3169
Peak width = 90.84+/- 1.4190
Peak width = 89.81+/- 1.3821
Peak width = 100.33+/- 1.6409
Peak width = 89.42+/- 1.4682
Peak width = 97.52+/- 1.5855
Peak width = 64.02+/- 1.0206
19.19 DAQ stops
LN2 refill transient?
19.28 soft reset
DAQ starts (RIBF03R1/R24)
Degrader (3mm Pb + 1mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al) variable
ASIC settings 2016Nov17-10.50.10
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
freq 25Hz range
t_r 50ns, tau_d 50us
19.34 BigRIPS file 1035
19.50 R24_3 AIDA ADC & disc data synchronised - see attachments 13 & 14
21:11 BRIKEN DAQ was not working properly from the last ~half hour (unrelated to AIDA), and had to be restarted and we
also had to send a couple of synchronization pulses.
R25_0: Started new run once BRIKEN was running and all DAQs synchronized
21.41 BigRIPS file 1037
22.14 Stop DAQ to change degrader
22.16 DAQ starts (RIBF03R1/R26)
Degrader (3mm Pb + 1mm Al) fixed + (0.3mm W/1mm Al + 1.0mm W/1mm Al) variable
ASIC settings 2016Nov17-10.50.10
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
freq 25Hz range
t_r 50ns, tau_d 50us
22.36 BRIKEN DAQ restarted
re-sync issued
AIDA data file R26_3
BRIKEN data file 039
22.42 BigRIPS file 1038
AIDA data file R26_4 |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 56.png
|
|
| Attachment 6: 18.png
|
|
| Attachment 7: 1.png
|
|
| Attachment 8: 2.png
|
|
| Attachment 9: 3.png
|
|
| Attachment 10: 4.png
|
|
| Attachment 11: 5.png
|
|
| Attachment 12: 7.png
|
|
| Attachment 13: 10.png
|
|
| Attachment 14: 11.png
|
|
|
604
|
Sun May 28 02:16:04 2017 |
TD, CB | Sunday 28 May | 10.15 DAQ continues OK
Current file May2017/R31_239
Detector biases; leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
good events; statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
10.30 E17/F11 ambient temperature +23.8 deg C, RH 40.9%, d.p. +9.6 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 95% - refilled)
10.35 Layouts 1, 3, 4, 7 and 8 - see attachments 6-13
Note - as expected, zero HEC events, layouts 5 & 6 not shown
10.58 DAQ stop - transient timeout nnaida1 - followed by successful stop
File May2017/R31_248
Delete R31
11.12 Disable data transfer
DAQ GO - transient timeout nnaida1 - followed by successful start
nnaida1 system console - see attachment 14
12:00 Moved plastic veto scintillator downstream in an attempt to reduce noise
Rates in noisy FEEs reduced by 20-30%
14:30 DAQ continues OK
Found that pulser induces counts in some HEC (nnaida20, 14 in particular). See attachment 15. Pulser off
removes these events completely.
These events could be mistaken for implantation events during data acquisition.
Increasing the fast comparator threshold HEC from 2 -> 3 suppresses the events. Increasing the threshold
to 4 does not appear to have further effects.
Even with the increased threshold some HEC (e.g. 1.0H) still see the pulser. See attachment 16 (fast
comparator threshold HEC was 0x3).
Checked data is synchronised in file R32_33
15:29 Set the threshold back to 2. We will perform this cut off-line in the analysis. |
| Attachment 1: 1.png
|
|
| Attachment 2: 2.png
|
|
| Attachment 3: 3.png
|
|
| Attachment 4: 4.png
|
|
| Attachment 5: 5.png
|
|
| Attachment 6: 6.png
|
|
| Attachment 7: 7.png
|
|
| Attachment 8: 8.png
|
|
| Attachment 9: 9.png
|
|
| Attachment 10: 10.png
|
|
| Attachment 11: 11.png
|
|
| Attachment 12: 12.png
|
|
| Attachment 13: 13.png
|
|
| Attachment 14: ttyUSB7
|
executing generic doStop
EXPERIMENTS/AIDA/Options/nnaida1 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
DataAcqCommand 1 Halt
Aida state now Stopped. AidaExecV8_52: Build 170816
Halt (1)
DataAcqCommand 1 disconnect xfer stream #0
disconnect xfer stream #0 (1)
completed generic doStop
executing generic doGo
EXPERIMENTS/AIDA/Options/nnaida1 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
DataAcqCommand 3 connect xfer stream #0
Initialising communication with storage server myserver on port 11001
Setting Transfer Block Size 65536
Setting Transfer Mode 3
Setting Overlap Mode 0
Setting Blocking Mode 0
Setting nice 0
TCP transfer library version 3.12
TCP socket send buffer was 16384 - now 221184
TCP socket receive buffer was 87380 - now 221184
TCP socket created OK - now connecting to myserver port 11001
Connected to myserver port 11001
connect xfer stream #0 (1)
DataAcqCommand 2 Go
Data Acquisition Statistics counters now cleared
ASIC DMA buffer size 2097152; WAVE DMA buffer size 1048576
Aida state now Going. AidaExecV8_52: Build 170816
Go (1)
Running Go_Electronics for nnaida1 with TSMaster nnaida6
ADCs Calibrated.
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
WV:0:Buffer info. Length = 64 : Offset = 0
WV:1:Buffer info. Length = 62 : Offset = 2
WV:2:Buffer info. Length = 60 : Offset = 4
WV:3:Buffer info. Length = 58 : Offset = 6
WV:4:Buffer info. Length = 56 : Offset = 8
WV:5:Buffer info. Length = 54 : Offset = 10
WV:6:Buffer info. Length = 52 : Offset = 12
WV:7:Buffer info. Length = 50 : Offset = 14
WV:8:Buffer info. Length = 48 : Offset = 16
WV:9:Buffer info. Length = 46 : Offset = 18
Finished Go_Electronics for AIDA
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0504
completed generic doGo
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0201
get_WAVEBlk (A) which = 0 ---- status = 0048, State machines = 0201
get_WAVEBlk (A) which = 1 ---- status = 0088, State machines = 0404
In RDOGo_Operate: Enabled Correlation, ASIC and discriminator readout
executing generic doStop
EXPERIMENTS/AIDA/Options/nnaida1 Stat.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_W_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 TS_SYNC_PHASE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ExtClk NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 MACB_TRIG_MODE NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.offset NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_GroupBase NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Rate.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Vchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC.settings NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 WAVE_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_D_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Stat.shift NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.Wchannels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_V_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Include.Aida NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida.channels NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataAcqPgm NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_H_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 DataFormat NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 ASIC_DMA_HWM NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Aida_Hist_L_Enable NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
EXPERIMENTS/AIDA/Options/nnaida1 Index NOT available: error 0x10004; unable to access CONTENTS for node /MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1: couldn't open "/MIDAS/DB/EXPERIMENTS/AIDA/Options/nnaida1/CONTENTS": permission denied
DataAcqCommand 1 Halt
Aida state now Stopped. AidaExecV8_52: Build 170816
Halt (1)
DataAcqCommand 1 disconnect xfer stream #0
disconnect xfer stream #0 (1)
completed generic doStop
Flash base address=FC000000
Set Flash to ASync Mode
XFLASH_PART_NOT_SUPPORTED
Finished copying zImage to RAM
Found 0 errors checking kernel image
VHDL version number 0X01900C1F
Bootloader version number 1.2.7 -- 22nd August 2012
Starting LMK 3200 setup
Setting LMK03200 to standard clock settings -- External Clock 23Nov15
.... SPI Base Address=0x81400000
clk_control_reg=0x4
Next step is SPIconfig
Control 32(0x81400000)=0x180
SlaveSel(0x81400000)=0x3
Ctrl(0x81400000)=0xE6
Ctrl(0x81400000)=0x86
SPIconfig done now to set up the LMK3200 registers
LMK #0 : regInit[0]=0x80000000
LMK #0 : regInit[1]=0x10070600
LMK #0 : regInit[2]=0x60601
LMK #0 : regInit[3]=0x60602
LMK #0 : regInit[4]=0x60603
LMK #0 : regInit[5]=0x70624
LMK #0 : regInit[6]=0x70605
LMK #0 : regInit[7]=0x70606
LMK #0 : regInit[8]=0x70627
LMK #0 : regInit[9]=0x10000908
LMK #0 : regInit[10]=0xA0022A09
LMK #0 : regInit[11]=0x82800B
LMK #0 : regInit[12]=0x28C800D
LMK #0 : regInit[13]=0x830020E
LMK #0 : regInit[14]=0xC800180F
Calibrate completed at 942 counts
Setting Clock Control =0x0000000B, to set GOE and sync bit
Ctrl @ SPIstop (0x81400000)=0x186
0 delay setup completed at 0 counts
Finished Clock setup LMK03200
completed LMK 3200 setup
Loaded all four ASICs with default settings
Setting the ADCs into calibration mode
Control 32(0x81400400)=0x180
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86
Init : Config of AD9252 SPI ok
Ctrl @ SPIstop (0x81400400)=0x186
ADCs initialised
waiting for 10 seconds
ADCs calibrated
Control 32(0x81400400)=0x186
SlaveSel(0x81400400)=0xFF
Ctrl(0x81400400)=0xE6
Ctrl(0x81400400)=0x86Config of AD9252 SPI ok
Ctrl @ SPIstop (0x81400400)=0x186
ADCs set for PN-9
Jumping to kernel simpleboot...
zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0)
Allocating 0x3b78cc bytes for kernel ...
gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes
Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
Finalizing device tree... flat tree at 0xbd1300
Probing IIC bus for MAC... MAC address = 0x0 0x4 0xa3 0x2a 0xd0 0x1b
Using Xilinx Virtex440 machine description
Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011
Zone PFN ranges:
DMA 0x00000000 -> 0x00007000
Normal 0x00007000 -> 0x00007000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00007000
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448
Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init)
Kernel virtual memory layout:
* 0xffffe000..0xfffff000 : fixmap
* 0xfde00000..0xfe000000 : consistent mem
* 0xfde00000..0xfde00000 : early ioremap
* 0xd1000000..0xfde00000 : vmalloc & ioremap
NR_IRQS:512
clocksource: timebase mult[a00000] shift[22] registered
Console: colour dummy device 80x25
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 214
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550
console [ttyS0] enabled
brd: module loaded
loop: module loaded
Device Tree Probing 'ethernet'
xilinx_lltemac 81c00000.ethernet: MAC address is now 0: 4:a3:2a:d0:1b
xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
XLlTemac: DCR address: 0x80
XLlTemac: buffer descriptor size: 32768 (0x8000)
XLlTemac: Allocating DMA descriptors with kmalloc
XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000
XTemac: PHY detected at address 7.
xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17
fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 5 MTD partitions on "fc000000.flash":
0x000000000000-0x000000500000 : "golden_firmware"
0x000000500000-0x000000800000 : "golden_kernel"
0x000000800000-0x000000d00000 : "user_firmware"
0x000000d00000-0x000000fe0000 : "user_kernel"
0x000000fe0000-0x000001000000 : "env_variables"
xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
SPI: XIlinx spi: bus number now 32766
xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21
SPI: XIlinx spi: bus number now 32765
mice: PS/2 mouse device common for all mice
Device Tree Probing 'i2c'
#0 at 0x81600000 mapped to 0xD1030000, irq=22
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
eth0: XLlTemac: Options: 0x3fa
eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
eth0: XLlTemac: speed set to 1000Mb/s
eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 10.1.1.250, my address is 10.1.1.1
IP-Config: Complete:
device=eth0, addr=10.1.1.1, mask=255.255.255.0, gw=10.1.1.250,
host=nnaida1, domain=, nis-domain=(none),
bootserver=10.1.1.250, rootserver=10.1.1.250, rootpath=/MIDAS@aidas/XilinxLinux/ppc_4xx/rfs/nnaida1,tcp
... 4312 more lines ...
|
| Attachment 15: 100.png
|
|
| Attachment 16: 101.png
|
|
|
752
|
Sun Oct 28 01:33:34 2018 |
CA, OH | Sunday 28 October |
09:33 DAQ still running, file R4_11.
Bias/leakage ok (attachment 1)
Leakage currents whilst still acceptable are up around 400nA on yesterday
Have checked all detectors and rates and pulser peak widths are still good across the board
Will keep an eye on but for now it appears to be ok
BRIKEN is currently doing a Cf source test so could be a result of charging from the source
Humidity: 33.1, Temperature: 24.6, Dew point: 7.1
FEE temperatures ok (attachment 2)
09:38 System wide checks ok
10:25 Pulser peak widths all checked
Widths comparable to 26th apart from 24 which is much wider from ~70 -> ~120
Waveforms, layout 7 and 8 - attachments 3 and 4
10:37 Started new run on file R5 at time 10:37
Threshold changed back to 100 from 10
Pulser on at 2Hz
16:34 Stopped R5 alpha run
Lowered thresholds to 0xa to produce higher rate data to test AIDA<->BRIKEN synchronisation
Started file R6 to do this
DAQ crashed on start ASIC readout with unable to connect to nnaida19 message appearing.
Could not clear despite attempts at restarting the merge if that was the cause.
FEE power cycle
17:03 DAQ recovered, R7 started
AIDA did not crash
BRIKEN started Ge fill cycle
AIDA did not crash during or after
17:17 R7 Stopped sync program is being worked on by Jorge,
17:32 Thresholds raised back to 100 from 10
Pulser switched off
R8 started
leakage current dropping down (attachment 5) |
| Attachment 1: 181028_0933_bias.png
|
|
| Attachment 2: 181028_0937_temp.png
|
|
| Attachment 3: 181028_1023_1.8.W.png
|
|
| Attachment 4: 181028_1024_layout8.png
|
|
| Attachment 5: 181028_1734_bias.png
|
|
|
247
|
Sun May 29 14:06:31 2016 |
TD, AE & CG | Sunday 29 May 2016 | Throughout day:
DSSD2 (3058-25) would not bias, either short circuit or suspiciously low leakage current.
Carried out some test in situ which were inconclusive.
Removed snout and took DSSD2 out.
Measuring the resistance across the two pins providing the n+n bias yielded 20 Ohms.
For the p+n the same measurement saw an open circuit => at least one of the bond wires broken.
DSSD1 (3131-9) was moved into the DSSD2 position and DSSD1 is now BB18-1000 3058-4.
All detectors were biased downstairs and all looked fine - leakage currents of 3.1 - 3.8 uA.
First detector sits 54.5cm from Al base plate and 10cm from the upstream end of the snout.
9mm between each of the DSSDs.
Stack now:
| 3058-4
b | 3131-9
e | 2998-23
a | 3058-5
m | 3058-6
V 3058-7
207Bi source installed at end of snout.
Snout moved upstairs and mounted.
DSSD2 would not bias. This was due to the HV cable providing bias for this DSSD having a short to ground.
Replaced with HV cable 7 and biased successfully.
All DSSDs now bias. Screenshots of leakage currents attached (attachments 4+5) at room temp 25.3oC.
Caen module Addr 00 provides bias to DSSDs 1, 2, 3 and 4 via channels 0, 1, 2 and 3 respectively.
Module Addr 01 provides bias to DSSDs 5 and 6 on channels 0 and 1, respectively.
Snout pushed in to EURICA.
22.05 nnaida17 ASIC parameters not loading
power cycle & reboot
nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3 |
| Attachment 1: 62.png
|
|
| Attachment 2: 63.png
|
|
| Attachment 3: 64.png
|
|
| Attachment 4: caen_addr0_290616_2244.png
|
|
| Attachment 5: caen_addr1_290616_2244.png
|
|
|
248
|
Sun May 29 20:06:15 2016 |
TD, AE & CG - reply PJCS | Sunday 29 May 2016 | > Throughout day:
> DSSD2 (3058-25) would not bias, either short circuit or suspiciously low leakage current.
> Carried out some test in situ which were inconclusive.
> Removed snout and took DSSD2 out.
> Measuring the resistance across the two pins providing the n+n bias yielded 20 Ohms.
> For the p+n the same measurement saw an open circuit => at least one of the bond wires broken.
>
> DSSD1 (3131-9) was moved into the DSSD2 position and DSSD1 is now BB18-1000 3058-4.
>
> All detectors were biased downstairs and all looked fine - leakage currents of 3.1 - 3.8 uA.
>
> First detector sits 54.5cm from Al base plate and 10cm from the upstream end of the snout.
> 9mm between each of the DSSDs.
>
> Stack now:
> | 3058-4
> b | 3131-9
> e | 2998-23
> a | 3058-5
> m | 3058-6
> V 3058-7
>
> 207Bi source installed at end of snout.
>
> Snout moved upstairs and mounted.
> DSSD2 would not bias. This was due to the HV cable providing bias for this DSSD having a short to ground.
> Replaced with HV cable 7 and biased successfully.
> All DSSDs now bias. Screenshots of leakage currents attached (attachments 4+5) at room temp 25.3oC.
> Caen module Addr 00 provides bias to DSSDs 1, 2, 3 and 4 via channels 0, 1, 2 and 3 respectively.
> Module Addr 01 provides bias to DSSDs 5 and 6 on channels 0 and 1, respectively.
>
> Snout pushed in to EURICA.
>
> 22.05 nnaida17 ASIC parameters not loading
> power cycle & reboot
>
> nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3
I suggest you check the hdmi hasn't been disturbed in the Macb or the FEE64.. Since the others are ok. I suggest it is the cable from the
Macb
to the FEE64 #5. If this fails to correct then please send a screen shot of the Local Controls status for nnaida5. |
|
249
|
Sun May 29 22:35:25 2016 |
TD, AE & CG - reply PJCS | Sunday 29 May 2016 |
> > 22.05 nnaida17 ASIC parameters not loading
> > power cycle & reboot
> >
> > nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3
>
> I suggest you check the hdmi hasn't been disturbed in the Macb or the FEE64.. Since the others are ok. I
suggest it is the cable from the
> Macb
> to the FEE64 #5. If this fails to correct then please send a screen shot of the Local Controls status for
nnaida5.
See enclosed. |
| Attachment 1: 70.png
|
|
| Attachment 2: 71.png
|
|
| Attachment 3: 72.png
|
|
|
250
|
Sun May 29 23:28:56 2016 |
TD, AE & CG - reply PJCS | Sunday 29 May 2016 | >
> > > 22.05 nnaida17 ASIC parameters not loading
> > > power cycle & reboot
> > >
> > > nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3
> >
> > I suggest you check the hdmi hasn't been disturbed in the Macb or the FEE64.. Since the others are ok. I
> suggest it is the cable from the
> > Macb
> > to the FEE64 #5. If this fails to correct then please send a screen shot of the Local Controls status for
> nnaida5.
>
> See enclosed.
The LMK3200 control register looks wrong.
Look at another FEE and I think it should be 0x1b |
|
251
|
Sun May 29 23:55:15 2016 |
TD, AE & CG - reply PJCS | Sunday 29 May 2016 | > >
> > > > 22.05 nnaida17 ASIC parameters not loading
> > > > power cycle & reboot
> > > >
> > > > nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3
> > >
> > > I suggest you check the hdmi hasn't been disturbed in the Macb or the FEE64.. Since the others are ok. I
> > suggest it is the cable from the
> > > Macb
> > > to the FEE64 #5. If this fails to correct then please send a screen shot of the Local Controls status for
> > nnaida5.
> >
> > See enclosed.
>
> The LMK3200 control register looks wrong.
> Look at another FEE and I think it should be 0x1b
nnaida1-4 LMK03200 control register 0xb cf. nnaida5 0x7 |
| Attachment 1: 80.png
|
|
| Attachment 2: 81.png
|
|
| Attachment 3: 82.png
|
|
| Attachment 4: 83.png
|
|
| Attachment 5: 84.png
|
|
|
252
|
Mon May 30 00:01:23 2016 |
TD, AE & CG - reply PJCS | Sunday 29 May 2016 | > > >
> > > > > 22.05 nnaida17 ASIC parameters not loading
> > > > > power cycle & reboot
> > > > >
> > > > > nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3
> > > >
> > > > I suggest you check the hdmi hasn't been disturbed in the Macb or the FEE64.. Since the others are ok. I
> > > suggest it is the cable from the
> > > > Macb
> > > > to the FEE64 #5. If this fails to correct then please send a screen shot of the Local Controls status for
> > > nnaida5.
> > >
> > > See enclosed.
> >
> > The LMK3200 control register looks wrong.
> > Look at another FEE and I think it should be 0x1b
>
> nnaida1-4 LMK03200 control register 0xb cf. nnaida5 0x7
Changing nnaida5 LMK03200 control register 0x7 -> 0xb does not help - see attached - system wide checks
and clock lock status 0x6 (unchanged) |
| Attachment 1: 90.png
|
|
| Attachment 2: 91.png
|
|
| Attachment 3: 92.png
|
|
| Attachment 4: 93.png
|
|
| Attachment 5: 94.png
|
|
|