 Sat Oct 21 07:26:13 2017, NB, RY, BD, MS, Corrected Calibration D4 
|
K R G B
m 0.001558636 0.0006599344 0.0015311753 0.0015807021
b -0.6545742444 0.4330534066 2.001278013 1.0994163913
|
|
Sat Nov 26 16:54:17 2016, AT & AT, Clovers
|
| Calibration of clovers |
|
Thu May 25 13:38:11 2017, AT, PC, KR, JLT, AA, Clover, detectors in new position
|
Both clover detectors were moved. They are in a symmetrical position. The end on the clover nose is of the order
of 3-4 mm from the AIDA tunnel.
|
|
Thu May 25 12:53:47 2017, AT, PC, JLT, KR, AA, Clover, 60Co
|
60Co source
Source ID: CD395
|
|
Thu May 25 12:49:55 2017, AT, JLT,PC,AA, Clover, 133Ba, LN2 filling
|
We started the measurement of the source when the N2 filling started. Just to check if there are funny things
related to the filling.
|
|
Sun Oct 22 08:52:17 2017, KR,JA,ATD,JLT, Clover resolution
|
Resolution check using 40K 1460 keV line
in the background measurement overnight
(File: 171022_0126_1101_bck.root)
|
|
Mon Nov 5 06:46:30 2018, KR, YR, MW, JLT, ..., Clover check
|
With detectors still on the floor we check signals and found
that D4 gives no signal with PA power. Two power supplies/cables were checked.
|
|
Wed Oct 18 08:46:23 2017, NB, SG, AT, JL, Clover G7 resolution
|
G7 clover was on the stand
Source: 152Eu
File: 171018_1627_152Eu_G7.root
|
|
Mon May 29 04:17:34 2017, YS, Clover Efficiency
|
Clover gamma detection efficiency calculation with 152Eu
Date of the measurement: 2017-05-26 10:15
root file: 170526_1015_152Eu_noAIDA_z0cm_014.root
|
|
Sun Oct 22 05:15:26 2017, RG,RY,MS,ATD,JA,JLT, Check of YSO 12x
|
We start a systematic check of YSO in BRIKEN DACQ
WE check and correct a configuration file for YSO alone
|
|
Tue May 5 05:04:00 2015, J.L. Tain, J. Agramunt, G. Kiss, Change of degrader thickness
|
For EURICA measurements degrader thickness were increased
trying to decrease MACI and AIDA trigger rate
Before we had 5.7 mm of Al
|
|
Tue Oct 24 13:14:47 2017, RY, Calibration data for clovers
|
for energy calibration with 152Eu source
171024_1858_152Eu_G7.root
171024_2112_152Eu_D4.root |
|
Fri Oct 20 05:33:11 2017, KR, NB, SG, RY, JL, AT: , Calibration and Resolution of D4 (after Repair)
|
Green and Red channels were repaired by crimping and securing the grounding of the cables and fixing the cables securely to the table.
All problems during the repair process were visible on the scope. See example attatched.
Calibration is as: |
|
Fri Oct 14 04:12:50 2016, JL Tain et al, CONF
|
New configuration file:
161014Conf_BrikenFull.xlsx |
|
Thu May 25 13:24:02 2017, AT,PC,KR,JLT,AA, CLOVER, detector not in its rigth position
|
We have noticed that D4 is not in its right position. That explains the different number of counts in the
detectors.
Probably of the order of 3 cm away from its nominal place.
|
|
Thu May 25 09:51:37 2017, A.T, A.A, CLOVER, Ba133
|
Source details:
Diameter: 25.05 mm
|
|
Fri May 26 03:52:23 2017, AT,AA,JLT, CLOVER, 137Cs
|
137Cs, No AIDA, Efficiency calibration
Source ID: 393
|
|
Thu May 25 10:15:02 2017, A.T, G. K, A.M, A. A, CLOVER, 133Ba no pulser
|
Source in position z=0 with the carton (cardboard) high-end, high-tech holder, but no AIDA (of course).
No pulser. Remember that the pulser is providing peaks around
|
|
Fri May 26 03:24:38 2017, GK,VP, AT, AA, CLOVER, 133Ba
|
133Ba source efficiency calibration, no AIDA
Start: 11:23
|
|
Sun May 28 11:41:24 2017, YS, CLOVER energy calibration
|
Clover calibration with 152Eu
Used peaks [keV]: 121.7817, 244.6975, 344.2785, 444.000, 778.9045, 867.378, 964.100, 1112.074, 1408.011
|
|