AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  BRIKEN, Page 19 of 21  ELOG logo
Entry  Fri Mar 31 18:00:41 2017, JLT,SN,JLiu,YS,CG, 37Na run 45 
Date: 1/04/2017
Start: 01:57
BRIKEN run: 45
Entry  Sat Apr 1 00:04:10 2017, ID GK DK Liu, 37Na or 36Ne labels? 
The BigRIPS settings are all called "36Ne setting" but the night shift labels these runs in the BRIKEN DAQ as
"37Na". We are not sure why we label it with 37Na, we think this should be consistently named 36Ne like the
BigRIPS settings. (For sure the strongest component in the beam might be 37Na. In the 39Na settings before it
Entry  Sat Apr 1 08:39:47 2017, ID OH JLT, 36Ne 37Na run 059 
Date: 1/04/2017
Start:16:38
BRIKEN run: 59
Entry  Sat Apr 1 05:01:24 2017, ID DK GK JLT, 36Ne 37Na run 057 
Date: 1/04/2017
Start:13:00
BRIKEN run: 57
Entry  Fri Mar 31 15:30:24 2017, JLT, PV, Liu, SN, CG, 34Ne run 44 
Date: 31/03/2017
Start: 23:27
BRIKEN run: 44
Entry  Fri Mar 31 14:40:56 2017, JLT, PV, Liu, CG, 34Ne run 43 
Date: 31/03/2017
Start: 22:19
BRIKEN run: 43
Entry  Fri Mar 31 13:04:01 2017, JLT JA ID PV, 32Ne Run 42 
Date: 31/03/2017
Start: 22:01
BRIKEN run: 42
Entry  Mon May 11 09:14:54 2015, G. Kiss, 252Cf_data_sheet 252Cf_15_05_2006_3p7MBq.jpg
The activity of the 252Cf source, used for the calibration was 3.7 MBq at 15.05.2006. Unfortunately, uncertainty is missing from the data sheet :-(
Entry  Mon Oct 22 11:42:50 2018, AT & AT, 252Cf, z=25cm, no clovers 
252Cf source placed using cardboard piece at z=25cm, source axis parallel upstream to the beam axis.

18/10/22 START: 19:44
Entry  Mon Oct 22 08:15:52 2018, AT & AT, 252Cf, z=15cm, no clovers 
252Cf source placed using cardboard piece at z=15cm, source axis parallel to the beam axis.

18/10/22 START: 16:15
Entry  Fri Oct 19 11:28:31 2018, AT & AT, 252Cf, z=0cm, no clovers, test online dead time 
During previous measurement a high dead time in the online was observed (50%). after restarting the crates and
the GASIFIC70, we resume the measurement. The conf file is 
Entry  Fri Oct 19 15:38:11 2018, AT & AT, 252Cf, z=0cm, no clovers, noise check individual tubes Screenshot_from_2018-10-20_18-45-17.png

18/10/19 START: 23:39
18/10/20 STOP: 18:30
Entry  Fri Oct 19 04:02:36 2018, AT & AT, 252Cf, z=0cm, no clovers (***** CHECK DATA) 

18/10/19 START: 12:05
18/10/19 STOP: 16:44
Entry  Fri Oct 19 10:27:22 2018, AT & AT, 252Cf, z=0cm, no clovers (***** CHECK DATA) 

18/10/19 START: 18:25
18/10/19 STOP: 19:19
Entry  Fri Oct 19 11:45:12 2018, AT & AT, 252Cf, z=0cm, no clovers 

18/10/19 START: 19:46
18/10/19 STOP: 23:33
Entry  Sun Oct 22 11:14:35 2017, JA,ATD,JLT,RG,RY,SG,MS,PV,Liu,KR, 252Cf source Wasabi-BrikenYSO 
252Cf source in the middle of Wasabi and YSO in front of Clover D4

Start: 19:15
Entry  Tue Oct 16 08:57:56 2018, ATD & JLT, 252Cf source 181016_1656_252Cf.root
252Cf source Run 
START:?
STOP: 16:56
Entry  Thu Oct 18 15:24:40 2018, AT2, JLT, SN, 252Cf long measure, z=25cm beam upstream, no clovers 

18/10/18 START: 23:23
18/10/19 STOP: 08:23
Entry  Thu Oct 18 12:16:39 2018, AT2, JLT, SN, 252Cf long measure, z=15cm beam upstream, no clovers 

18/10/18 START: 20:20
18/10/18 STOP: 23:17
Entry  Wed Oct 17 14:11:18 2018, AT & AT, 252Cf long measure, z=0cm, threshold 5% lower 

18/10/17 START: 22:04
18/10/17 STOP: 08:18
ELOG V3.1.3-7933898