252Cf at z=15cm,ie center of moderator, source axis perpendicular at 0deg (typical orientation)
Low threshold.

18/11/05 START: 21:05
18/11/05 STOP:  22.30


** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181105_2105_252Cf_z15cm_2230.root


DLT files:

181105_2105_252Cf_z15cm_137.dlt
181105_2105_252Cf_z15cm_138.dlt
181105_2105_252Cf_z15cm_139.dlt




Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

252Cf at z=0cm,ie center of moderator, source axis parallel downstream 
Low threshold.

18/11/05 START: 22:46
18/11/05 STOP:  00:01


** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181105_2245_252Cf_z0cm_0001.root


DLT files:

181105_2245_252Cf_z0cm_140.dlt
181105_2245_252Cf_z0cm_141.dlt
181105_2245_252Cf_z0cm_142.dlt



Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

252Cf at z=15cm, i.e 15 cm from the center of the detector,  source axis parallel downstream 
Low threshold.

18/11/06 START: 00:10
18/11/06 STOP:  01:32


** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181106_0010_252Cf_z15cm_0132.root



DLT files:

181106_0010_252Cf_z15cm_143.dlt
181106_0010_252Cf_z15cm_144.dlt
181106_0010_252Cf_z15cm_145.dlt





Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

252Cf at z=25cm, i.e 25 cm from the center of the detector,  source axis parallel downstream 
Low threshold.

18/11/06 START: 01:43
18/11/06 STOP:  03:03


** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181106_0143_252Cf_z25cm_0303.root



DLT files:

181106_0143_252Cf_z25cm_146.dlt
181106_0143_252Cf_z25cm_147.dlt





Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

252Cf at z=25cm, i.e 25 cm from the center of the detector,  source axis perpendicular  
Low threshold.

18/11/06 START: 03:18
18/11/06 STOP:  04:39

** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181106_0318_252Cf_z25cm_0439.root

DLT files:

181106_0318_252Cf_z25cm_148.dlt
181106_0318_252Cf_z25cm_149.dlt


Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

"The clock at LN2 fill system is off by about 25 minutes (filling comes later than set at the control unit.)"

Yes, This is how it always was.

"Filling of G7 was stopped by "emergency sensor" after about 15 minutes of filling. Likely the temp sensor at the LN2 overflow pipe of G7 should be changed."

You can put this on a different line of the fill system....

252Cf at z=0cm, i.e 0 cm from the center of the detector,  source axis perpendicular at 90 deg 
Low threshold.

18/11/06 START:04:56 
18/11/06 STOP: 06:16 

** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181106_0456_252Cf_z0cm_0616.root

DLT files:

181106_0456_252Cf_z0cm_150.dlt
181106_0456_252Cf_z0cm_151.dlt
181106_0456_252Cf_z0cm_152.dlt

Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

252Cf at z=25cm, i.e 25 cm from the center of the detector,  source axis perpendicular at 90 deg 
Low threshold.

18/11/06 START: 06:25
18/11/06 STOP:  07:45

** Configuration file: 
181016_Conf_BrikenFull_2153_test_thr.xlsx


ROOT file: 

181106_0625_252Cf_z25cm_0745.root

DLT files:

181106_0625_252Cf_z25cm_153.dlt
181106_0625_252Cf_z25cm_154.dlt

Comment: 
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.

252Cf at z=0cm, i.e 0 cm from the center of the detector,  source axis perpendicular at 0 deg 
Low threshold.

18/11/06 START:08:00 
18/11/06 STOP: 09:11 

** Configuration file: 

181030_Conf_BrikenFull_LowThrAdj_masterCLK.xlsx

ROOT file: 

181106_0800_252Cf_z0cm_nopulser_0911.root

DLT files:

181106_0800_252Cf_z0cm_nopulser_155.dlt
181106_0800_252Cf_z0cm_nopulser_156.dlt
181106_0800_252Cf_z0cm_nopulser_157.dlt

Comment: 
- Pulser OFF, using configuration file 181030_Conf_BrikenFull_LowThrAdj_masterCLK.xlsx
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.
- In the online in RateBRIKEN a weird fluctuation is observed (screenshot, attachement 1)

-1

PID plot for the high mass setting (165Pm), run 2018, rare earth peak experiment.
Partial statistics (~30h) from identification at F7.
Please use for internal reports about the BRIKEN activities.