ID |
Date |
Author |
Subject |
Text |
 |
|
21
|
Tue May 5 05:04:00 2015 |
J.L. Tain, J. Agramunt, G. Kiss | Change of degrader thickness | For EURICA measurements degrader thickness
were increased
trying to decrease MACI and AIDA trigger |
|
|
22
|
Tue May 5 05:17:36 2015 |
J.L. Tain, J. Agramunt, G. Kiss | Ambient background measurement |
Failure of
a quadrupole triplet at BigRIPS (some time
after earthquake)
We take the chance of |
|
|
23
|
Tue May 5 05:29:26 2015 |
J.L. Tain, J. Agramunt, G. Kiss | Ambient background measurement | Beam still down. New background measurement
with new RIKEN tube below the MUSIC chamber
|
|
|
24
|
Wed May 6 04:57:24 2015 |
J.L. Tain, J. Agramunt, G. Kiss | New degrader thickness | The Al degrader thickness was reduced to 4.8mm |
|
|
25
|
Wed May 6 05:10:14 2015 |
J.L. Tain, J. Agramunt, G. Kiss | 94Se setting measurement | After the long shutdown the beam is back at
00:30 (06/05)
Intensity is slightly lower 26pnA and somewhat |
|
|
26
|
Wed May 6 11:41:24 2015 |
J. Agramunt, A. Estrade | First online combined analysis | Screen shot of the rudimentary on-line
analysis of the combined data:
BRIKEN-AIDA-BigRIPS
|
|
|
27
|
Thu May 7 08:36:56 2015 |
J.L. Tain, J. Agramunt, A. Estrade, G.Kiss, T. Davinson, C.Griffin | First BRIKEN_v.0 beta-delayed neutron correlations? | During the 98,100Kr setting run we observe
in the time correlation plot (middle right |
|
|
28
|
Fri May 8 03:20:48 2015 |
J.Agramunt J.L.Tain K.Gabor | BnCorrelation | We run all the night until the end of beam
time, and the Bn correlations are more clear
now. |
|
|
29
|
Mon May 11 09:14:54 2015 |
G. Kiss | 252Cf_data_sheet | The activity of the 252Cf source, used
for the calibration was 3.7 MBq at 15.05.2006.
Unfortunately, uncertainty is missing from |
|
|
30
|
Sat Jul 9 20:44:31 2016 |
J.L. Tain | BRIKEN neutron detector | START
Assembly and commissioning of BRIKEN neutron
detector
|
|
|
31
|
Sat Jul 9 21:00:54 2016 |
J.L. Tain | Hardware | A list of the available hardware |
|
|
32
|
Sat Jul 9 21:08:08 2016 |
J.L. Tain | Neutron moderator | Drawings of the polyethylene neutron moderator
and table assembly |
|
|
33
|
Sat Jul 9 21:14:12 2016 |
J.L. Tain | 3He tubes | Drawings and specs of 3He tubes |
|
|
34
|
Sat Jul 9 21:21:38 2016 |
J.L. Tain | 3He tubes | Tube distribution in the moderator, pre-amplifiers
and digitizers |
|
|
35
|
Sat Jul 9 21:26:25 2016 |
J.L. Tain | EDACQ | Electronics and DACQ for July 2016 assembly:
hardware and connections |
|
|
36
|
Fri Jul 15 08:29:14 2016 |
Nathan Brewer, Shintaro Go | Expected Performance and Voltage Setting for Germanium | Expected Resolution:
------------------------------
G7 should be ~2.0 keV FWHM at 600 |
|
|
37
|
Fri Jul 15 11:47:31 2016 |
Nathan Brewer and Alvaro Tolosa | Preliminary Ge Calibration, Resolution and Configuration | Today several tests (3) were done with
the germanium detectors with the voltage
configuration listed in the previous entry. |
9x |
|
38
|
Mon Jul 18 09:32:50 2016 |
Shintaro Go | HV controls | You can start applying HVs on the detectors
using macro on the control-computer.
If you have already signed in the |
|
|
39
|
Mon Jul 18 18:40:32 2016 |
A. Tarifeņo-Saldivia and J. L. Tain | 3He tubes - Testing | Test of individual 3He tubes
The tests were done using the ATOMKI MCA |
7x |
|
40
|
Mon Jul 18 19:01:36 2016 |
J.L. Tain | 3He tubes | Adjustment of HV and PA gain
We adjust the HV for each tube type and the |
|