| ID |
Date |
Author |
Subject |
Text |
 |
|
357
|
Tue Mar 1 22:10:26 2022 |
David, George | Current status | Ring current 6.67e7 particles/s
pressure at S1: 2.3-2.8e-8
Merger, Tape server (WS3): |
| |
356
|
Tue Mar 1 21:34:06 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
355
|
Tue Mar 1 20:41:28 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
354
|
Tue Mar 1 19:41:24 2022 |
PM, LV | target temperature walkthrough | A target temperature walkthrough has been
initiated at 20:41 since the target density
at S1 had slightly decreased (with ~0.1-0.2) |
| |
353
|
Tue Mar 1 19:40:28 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
12x | |
352
|
Tue Mar 1 18:43:41 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
351
|
Tue Mar 1 17:36:04 2022 |
PM, LV | check | no change:
Check Clock Status': Passed
5, Failed 0 |
14x | |
350
|
Tue Mar 1 16:57:34 2022 |
CB, LV, PMH | New run | Beam issues due to too long storage time
in the last hours. Motors moved out and not
moving. |
| |
349
|
Tue Mar 1 14:01:01 2022 |
MS, SHB | check | 'Check Clock Status', 'Check
ADC Calibration' and 'Check the White
rabbit decoder status' : no change |
11x | |
348
|
Tue Mar 1 12:58:32 2022 |
CB, MS, SS, ML | Synced pneumatic motion | New run R84
Attempting to sync pneumatic movement
with ring. Still see something on t out -> |
| |
347
|
Tue Mar 1 12:33:21 2022 |
MS, SHB | check | 'Check Clock Status', 'Check
ADC Calibration' and 'Check the White
rabbit decoder status': no change |
11x | |
346
|
Tue Mar 1 10:43:36 2022 |
MS, SHB | check | 'Check Clock Status', 'Check
ADC Calibration' and 'Check the White
rabbit decoder status': same |
11x | |
345
|
Tue Mar 1 10:35:59 2022 |
MS, SHB | next run on tape server tab | old potentiometer position 19.1 mm
new run number: 83
new potentiometer position : 27.58 |
| |
344
|
Tue Mar 1 08:02:26 2022 |
SHB, MS | check |
'Check Clock Status', 'Check
ADC Calibration' and 'Check the White |
11x | |
343
|
Tue Mar 1 06:35:42 2022 |
SHB, MS | check | detector motors are still out
'Check Clock Status', 'Check
ADC Calibration' : Clock status test |
11x | |
342
|
Tue Mar 1 06:04:04 2022 |
SHB, MS | positions | just FYI: current positions saved in files
are x=1000 and y=-750. this information is
good in case of crash. |
| |
341
|
Tue Mar 1 05:23:02 2022 |
JM, EM | Current status | 06:20
Servo motors moved to fully out
position as some work on the beam was neccessary. |
| |
340
|
Tue Mar 1 04:07:31 2022 |
JM, EM | Temperature cycle | Have been unable to achieve decent target
density with temperature cycling so far.
Will attempt to go up to 300 k and back down |
| |
339
|
Tue Mar 1 03:34:28 2022 |
JM, EM | Current status | Temperature setpoint = 116 k
Detector IN potentiometer = 34.89
mm |
7x | |
338
|
Tue Mar 1 03:19:50 2022 |
JM, EM | Temperature Cycle | 04:20
Did another temperature cycle (118
K -> 125 K -> 95 K -> 116 K) trying |
|
|