AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  CARME, Page 19 of 34  ELOG logo
Entry  Mon Feb 28 01:16:02 2022, JM, OF, Temperature decrease 115K to 110K 20220228_021455.jpg20220228_023832.jpg20220228_025416.jpg

02:15

Density remains stable at 155 K

Temperature setpoint decreased by 1K. Aim to get to 110 K to see if higher stable density can be achieved. 

Spike in YR pressures observed as temperature was decreased, still look OK. Will leave to settle for a while. T = 114K.

Rates remain stable at ~ 10^2 peak height level.  

02:33

Pressures stabilised

Setpoint to 113 K. 

02:40

No pressure spike observed after decrease

Setpoint to 112 K

02:46

No pressure spike observed after decrease

Setpoint to 111 K

Pressure spike observed  in YR pressures (smaller than last) - give time to recover. 

03:00

Setpoint to 110 K

No pressure spike observed. 

Rutherford rate peak height remains stable at ~ 10^2 . Perhaps peak height minimum is consistently higher than before, difficult to say. 

Attachment 1 - 115 K

Attachment 2 - spike 1

Attachment 3 - spike 2

All pressure stable now 

Entry  Mon Feb 28 00:24:05 2022, JM, OF, Current status 7x

01:23

Temperature setpoint = 115 k

Rutherford rates still appears stable. Max peak ~10^2 counts, min peak ~50 counts per 20 seconds. Greater fluctuations in YR07 plot however do not appear too high, peaks coincide with sustained higher rutherford counts  ~10^2 counts most of the time.

Ring Avg pressure 3.1 E-10 mbar

Ring current ~ 6E7

Temperatures OK

System wide checks OK - wr fails is attached

Merger OK

Data rate ~ 1400 kb/sec

Leakage current ~ 3.23 uA

Entry  Sun Feb 27 23:17:33 2022, JM, OF, Current status 10x

00:20

Temperature setpoint 115 K

Rutherford rate appears fairly stable. Fluctuations from a max peak of 10^2 to a minimum of ~40 peak hieght. Fluctuates remain lower than at 95 K.

Temperatures OK

System checks OK - white rabbit attached.

Leakage current ~ 3.236 uA

Data rate ~1177 kb/sec

Merger OK

Ring vacuum levels appear to have stablised from previous large fluctuations. Avg ring pressure decreased to 3.8E-10 mbar from 7.5E-10 mbar at start of the shift. (attachment 9)

00:51

Rutherford rate still stable. Fluctuations have reduced slightly. Min peak height now ~60 counts, max peak ~10^2 counts. (attachment 10)

Ring vacuum avg = 3.2 E-10 mbar.

E1 pump current ~ 2.4 A

Entry  Sun Feb 27 22:03:51 2022, JM, OF, Current Status 9x

23:00

Target Temperature setpoint 95 K

Current in the ring ~ 5e7 pps

Rutherford rate appears to fluctuate by 2 ordera of magnitude depending on target density. Rate currently ~10^2 counts per 20s. (attachmet 1) can vary to nothing (attachment 6). When consistently low will increase temperature

Effect of target density can be observed in beam current plots. (attachment 7). When rutherford rate is high, beam current tends to decrease over the shot. When the rate is low the current maintains a level throughout. 

Merger OK

Data rate ~ 800 kb/sec. Current run 78

Leakage current ~3.24 uA

Temperatures OK

System Checks OK - white rabbit fail attached

23:36

Rutherford rate consistently low. Maximum rate was just below 10^2 counts, only lasted for one beam shot then low count rates < 10^1 counts.

Setpoint increase to 125 K. 

Increase in pressure across the board in gasjet after increasing temperature which reduces fairly rapidly after 5 minutes. Current in E1 pump reduced from 2.7 A to 2.3 A at 125k. 

Rate at 125K attachment 8. Appears stable.

23:49

Setpoint decrease to 115 K,

23:56

Temperature now stable at 115K. Rate has increased to ~10^2 counts per 20 secs and appears stable (no large fluctuations). Will keep at this level to see if it can be maintained for significant time period.

Entry  Sun Feb 27 20:38:06 2022, Rui-Jiu Chen, Yuri, Current status 13x

Ring current ~5.0e7 particles/s

SW3

- Merger OK

- Screenshot uploaded

- Data rate : 1081kbytes/s

SW4

- current plot uploaded. 3.25 uA.

SW2

- T OK

- system wide checks OK

- Check statistics tab ok

- Spectra ok

SW5

4 plots uploaded

Entry  Sun Feb 27 20:19:06 2022, Rui-Jiu Chen, Yuri, open the valves of target. 
 
Entry  Sun Feb 27 19:01:02 2022, Rui-Jiu Chen, Yuri, Current status 13x

Ring current ~5.96e7 particles/s

SW3

- Merger OK

- Screenshot uploaded

- Data rate : 1062 kbytes/s

SW4

- current plot uploaded. 3.25 uA.

SW2

- T OK

- system wide checks OK

- Check statistics tab ok

- Spectra ok

SW5

4 plots uploaded

Entry  Sun Feb 27 18:46:42 2022, Rui-Jiu Chen, Yuri, Change target temperature 

time              Temperature             E1 current(A)                 E1 frequency(Hz)

19:06           170                                 1.2                                 820

19:11           200                                 1.53                               820

19:37           230                                 1.56                               820

19:37           275                                 1.35                               820

19:48           300                                 1.2                                 820

keep this temperature for 15 minues.

20:07 change the temperature from 300 k to 95 k.

21:11          95                                   2.65                               820

 

 

Entry  Sun Feb 27 17:00:45 2022, Rui-Jiu Chen, Yuri, current status 13x

Ring current ~7.76e7 particles/s

SW3

- Merger OK

- Screenshot uploaded

- Data rate : 1664 kbytes/s

SW4

- current plot uploaded. 3.25 uA.

SW2

- T OK

- system wide checks OK

- Check statistics tab ok

- Spectra ok

SW5

4 plots uploaded

Entry  Sun Feb 27 16:30:35 2022, Rui-Jiu Chen, Yuri, Change target temperature again 

1. change T from 95 k to 140 k.

2. keep T at 140k for 15 minutes.

3. change T from 140 k to 95 k.

Entry  Sun Feb 27 15:41:33 2022, Rui-Jiu Chen, Yuri, current status 13x

16:38 change target temperature from 95 k to 140 k.

16:48 change target temperature from 140k to 95k.

 

Ring current ~5.62e7 particles/s

SW3

- Merger OK

- Screenshot uploaded

- Data rate : 1190 kbytes/s

SW4

- current plot uploaded. 3.25 uA.

SW2

- T OK

- system wide checks OK

- Check statistics tab ok

- Spectra ok

SW5

4 plots uploaded

Entry  Sun Feb 27 15:02:16 2022, Rui-Jiu Chen, Yuri, Change target temperature 14x

16:00 change temperature from 95 k to 120k.

16:07 change temperature from 120 k to 95k.

 

Ring current ~4.97e7 particles/s

SW3

- Merger OK

- Screenshot uploaded

- Data rate : 1036 kbytes/s

SW4

- current plot uploaded. 3.25 uA.

SW2

- T OK

- system wide checks OK

- Check statistics tab ok

- Spectra ok

SW5

4 plots uploaded

Entry  Sun Feb 27 14:05:30 2022, Rui-Jiu, Ragan, Current status 14x

Ring current ~7.61e7 particles/s

SW3

- Merger OK

- Screenshot uploaded

- Data rate : 1312 kbytes/s

SW4

- current plot uploaded. 3.25 uA.

SW2

- T OK

- system wide checks OK

- Check statistics tab ok

- Spectra ok

SW5

4 plots uploaded

Entry  Sun Feb 27 13:34:24 2022, RSS TD, Current status 

14:33: 95K-->140K

14:44: 140K --> 95K

Ring current ~6e7 particles/s

Merger, Tape server (WS3): 1414 kB/s writing ok

Leakage current (WS4): 3.43 uA

DAQ (WS2): temperature checked, clock status: ok, adc calibration: ok, white rabbit check: failed

Online monitoring (WS 5): done

Entry  Sun Feb 27 12:49:44 2022, TD RSS, Sunday 27 February 07:00-15:00 6x
13.50 Cryostat set point 120K

13.49 Temperatures OK - attachment 1

13:51 System wide checks OK except WR decoder status

		 Base 		Current 	Difference
aida01 fault 	 0xab60 : 	 0xab86 : 	 38  
aida02 fault 	 0x88d3 : 	 0x88f8 : 	 37  
aida03 fault 	 0x23aa : 	 0x23d0 : 	 38  
aida04 fault 	 0x15d7 : 	 0x15fd : 	 38  
aida05 fault 	 0x2f03 : 	 0x2f0f : 	 12  
White Rabbit error counter test result: Passed 0, Failed 5

Understand the status reports as follows:-
Status bit 3 : White Rabbit decoder detected an error in the received data
Status bit 2 : Firmware registered WR error, no reload of Timestamp
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR

13.56 set point 95K

      stat, 1.8.L & 1.8.W spectra - attachments 2-6
Entry  Sun Feb 27 12:00:13 2022, RSS TD, Current status 13-xy-2022-02-27_13-01-36.png13-yrate-2022-02-27_13-01-06.png13-xrate-Screenshot_from_2022-02-27_13-00-50.png

Ring current ~7.7e7 particles/s

Merger, Tape server (WS3): 1414 kB/s writing ok

Leakage current (WS4): 3.43 uA

DAQ (WS2): temperature checked, clock status: ok, adc calibration: ok, white rabbit check: failed

Online monitoring (WS 5): done

Entry  Sun Feb 27 11:00:08 2022, RSS TD, Current status 12-xy-2022-02-27_12-16-19.png12-yrate-2022-02-27_12-15-42.png12-xrate-2022-02-27_12-15-03.png

12:00: 95K-->120K

12:07: 120K --> 95K

Ring current ~6e7 particles/s

Merger, Tape server (WS3): 1414 kB/s writing ok

Leakage current (WS4): 3.43 uA

DAQ (WS2): temperature checked, clock status: ok, adc calibration: ok, white rabbit check: failed

Online monitoring (WS 5): done

Entry  Sun Feb 27 10:00:07 2022, RSS TD, Current status 11-xy-2022-02-27_11-01-22.png11-ey-rate2022-02-27_11-00-46.png11-ex-rate-2022-02-27_11-00-27.png

Ring current ~9e7 particles/s

Merger, Tape server (WS3): 1414 kB/s writing ok

Leakage current (WS4): 3.43 uA

DAQ (WS2): temperature checked, clock status: ok, adc calibration: ok, white rabbit check: failed

Online monitoring (WS 5): done

Entry  Sun Feb 27 09:00:09 2022, RSS TD, Current status 7x

10:00: 95K-->120K

10:08: 120K --> 95K

Ring current ~7e7 particles/s

Merger, Tape server (WS3): 1414 kB/s writing ok

Leakage current (WS4): 3.43 uA

DAQ (WS2): temperature checked, clock status: ok, adc calibration: ok, white rabbit check: failed

Online monitoring (WS 5): done

Entry  Sun Feb 27 08:00:23 2022, RSS TD, Current status 9-xy-2022-02-27_09-00-57.png9-ey-2022-02-27_09-00-03.png9-ex-2022-02-27_08-59-48.png

Ring current ~7.5e7 particles/s

Merger, Tape server (WS3): 1414 kB/s writing ok

Leakage current (WS4): 3.44 uA

DAQ (WS2): temperature checked, clock status: ok, adc calibration: ok, white rabbit check: failed

Online monitoring (WS 5): done

ELOG V3.1.4-unknown