ELOG CARME

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

CARME, Page 27 of 38

Full | Summary | Threaded | Hide attachments

756 Entries

Goto page Previous 1, 2, 3 ... 26, 27, 28 ... 36, 37, 38 Next

ID	Date	Author	Subject
237	Tue Feb 22 14:32:04 2022	David, Yury	Current status
Merger, Tape server (WS3) checks: DONE, writing ~1 MB/s, refreshing is fine Leakage current (WS4): 3.48 uA , stable current DAQ (WS2): temperature checked, - clock status: Clock status test result: Passed 5, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable - adc calibration: Calibration test result: Passed 5, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module - white rabbit check: Base Current Difference aida01 fault 0xc228 : 0xc272 : 74 aida02 fault 0x5e98 : 0x5edf : 71 aida03 fault 0x92d3 : 0x931d : 74 aida04 fault 0x7a92 : 0x7adc : 74 aida05 fault 0xedc0 : 0xedcc : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR DAQ (WS2): everything ok Online monitoring (WS 5): done; first shots with something?
Attachment 1: merger15.png

Attachment 2: 2022-02-22_15-35-14-tape.png

Attachment 3: 2022-02-22_15-39-40c.png

Attachment 4: 2022-02-22_15-42-27t.png

Attachment 5: 2022-02-22_15-52-35-goodevents.png

Attachment 6: 2022-02-22_15-57-02adc.png

Attachment 7: 2022-02-22_16-11-21correla.png

Attachment 8: 2022-02-22_16-17-33spect.png

Attachment 9: 2022-02-22_16-26-36xytot.png

Attachment 10: 2022-02-22_16-26-12xyrate.png

Attachment 11: 2022-02-22_16-25-03loweeytot.png

Attachment 12: 2022-02-22_16-24-17-lowexto.png

238	Tue Feb 22 16:09:08 2022	David, Yury	Current status
Merger, Tape server (WS3) checks: DONE, writing ~1 1273kB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, - clock status: Clock status test result: Passed 5, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable - adc calibration: Calibration test result: Passed 5, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module - white rabbit check: Base Current Difference aida01 fault 0xc228 : 0xc272 : 74 aida02 fault 0x5e98 : 0x5edf : 71 aida03 fault 0x92d3 : 0x931d : 74 aida04 fault 0x7a92 : 0x7adc : 74 aida05 fault 0xedc0 : 0xedcc : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR DAQ (WS2): everything ok Online monitoring (WS 5): done
Attachment 1: 2022-02-22_17-13-41tape.png

Attachment 2: 2022-02-22_17-13-17mantab.png

Attachment 3: 2022-02-22_17-11-46temp.png

Attachment 4: 2022-02-22_17-21-39xytotal.png

Attachment 5: 2022-02-22_17-21-09xyrate.png

Attachment 6: 2022-02-22_17-20-33extotl.png

Attachment 7: 2022-02-22_17-20-10eytotl.png

Attachment 8: 2022-02-22_17-19-29spect.png

Attachment 9: 2022-02-22_17-18-46good.png

Attachment 10: 2022-02-22_17-18-24adc.png

Attachment 11: 2022-02-22_17-17-53aidacorrel.png

Attachment 12: 2022-02-22_17-16-50moretempt.png

239	Tue Feb 22 17:32:38 2022	David	Current status
Michael is modifying the settings of the electron cooler --> changed beam from bunched to coasting Merger, Tape server (WS3) checks: DONE, writing ~1036 kB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, - clock status: Clock status test result: Passed 5, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable - adc calibration: Calibration test result: Passed 5, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module - white rabbit check: Base Current Difference aida01 fault 0xc228 : 0xc274 : 76 aida02 fault 0x5e98 : 0x5ee0 : 72 aida03 fault 0x92d3 : 0x931f : 76 aida04 fault 0x7a92 : 0x7ade : 76 aida05 fault 0xedc0 : 0xedcc : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR DAQ (WS2): everything ok Online monitoring (WS 5): done;
Attachment 1: 2022-02-22_18-45-21eytotal.png

Attachment 2: 2022-02-22_18-44-53extotal.png

Attachment 3: 2022-02-22_18-42-59xytotal.png

Attachment 4: 2022-02-22_18-42-41xyrate.png

Attachment 5: 2022-02-22_18-42-00spect.png

Attachment 6: 2022-02-22_18-41-22correl.png

Attachment 7: 2022-02-22_18-40-55adc.png

Attachment 8: 2022-02-22_18-40-23goodeve.png

Attachment 9: 2022-02-22_18-38-15moretem.png

Attachment 10: 2022-02-22_18-37-35temp.png

Attachment 11: 2022-02-22_18-34-55tapservice.png

Attachment 12: 2022-02-22_18-34-21merger.png

241	Tue Feb 22 19:11:18 2022	David	Current status
Still trying to recover previous pressures, more details in the next entry. Merger, Tape server (WS3) checks: DONE, writing ~1030 kB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, DAQ (WS2): everything ok Online monitoring (WS 5): done;
Attachment 1: 2022-02-22_20-16-26eyrate.png

Attachment 2: 2022-02-22_20-15-34.eytotal.png

243	Tue Feb 22 20:08:40 2022	David, Yuri	Current status
Recently the pressure started to raise a bit, we have increased the temperature from 129.1 K to 129.2 K. Current pressure at S1 2.10e-7. Merger, Tape server (WS3) checks: DONE, writing ~1 MB/s, refreshing is fine Leakage current (WS4): 3.46 uA , stable current DAQ (WS2): temperature checked, clock status:ok, adc calibration:ok, white rabbit check:ok DAQ (WS2): everything ok Online monitoring (WS 5): done
Attachment 1: 2022-02-22_21-14-23exrate.png

Attachment 2: 2022-02-22_21-14-01xytotal.png

Attachment 3: 2022-02-22_21-13-11extotal.png

244	Tue Feb 22 21:09:39 2022	David, Yuri	Current status
Pressure seems as before 19:10. Merger, Tape server (WS3) checks: DONE, writing ~1 MB/s, refreshing is fine Leakage current (WS4): 3.47 uA , stable current DAQ (WS2): temperature checked, clock status:ok, adc calibration:ok, white rabbit check:ok DAQ (WS2): everything ok Online monitoring (WS 5): done
Attachment 1: 2022-02-22_22-12-55xytotal.png

Attachment 2: 2022-02-22_22-12-21exrate.png

Attachment 3: 2022-02-22_22-12-00extotal.png

245	Tue Feb 22 21:57:13 2022	George, Jordan	Current status
23:53 Temperatures OK System checks OK - white rabbit fail diff ~ 80 Pressures stable Cryo temp = 129.2 K setpoint Data rate ~1.2 MB/s Leakage current ~ 3.47 uA 00:53 YR10 avg = 1.29E-10 mbar YR09 avg = 8.7E-10 mbar YR04 avg = 1.13E-11 mbar YR07 avg = 1.76E-10 mbar YR08 avg = 2.18E-9 mbar Data rate ~ 1.1 Mb/s Temperatures OK system checks OK - white rabbit fail diff ~ 80 Pressure stable, cryostat temp setpoint = 129.2k Leakage current = 3.47 uA Beam intensity reads ~ 2.6-3E7
Attachment 1: 2022-02-22_23-53-38-lowenergy-xytotal.png

Attachment 2: 2022-02-22_23-50-45-Ex-rate-hist.png

Attachment 3: 2022-02-22_23-49-20-Ex-total-hist.png

Attachment 4: 20220223_002946.jpg

246	Wed Feb 23 00:54:17 2022	Jordan, George	Current status
02:04 Temps OK Data Rate - ~1.1Mb/s System Check OK White rabbit diff - 83 Leakage Current - ~3.475uA YR09 AVG: 7.51E-10mbar YR10AVG: 1.21E-10mbar YR07AVG: 1.67E-9mbar YR08AVG: 1.91E-9mbar
Attachment 1: 2022-02-23_02-02-53extotal.png

Attachment 2: 2022-02-23_02-02-00lowEnergyXYtot.png

Attachment 3: 2022-02-23_01-59-14exRate.png

247	Wed Feb 23 01:56:59 2022	Jordan, George	Current status
02:56 Temps OK write speed ~1.2Mb/s System check OK White rabbit diff - 89 Leakage Current ~3.472uA Pressures stable Beam intensity ~3.0e7 cryostat setpoint 129.2K (unchanged) AVG Pressures: YR09: 8.48e-10mbar YR10: 1.28e-10mbar YR07: 1.71e-10mbar YR08: 2.1e-9mbar Aida 1 1*L plot attached. Some channels appear missing. Width of rutherford peaks ~280-300 channels.
Attachment 1: 2022-02-23_03-01-54xyTotal.png

Attachment 2: 2022-02-23_03-00-54exTotal.png

Attachment 3: 2022-02-23_03-00-11exRate.png

Attachment 4: 2022-02-23_03-10-45-aida1-1*L.png

248	Wed Feb 23 02:52:09 2022	Jordan, George	Current status
03:52 Temps OK System Checks OK White rabbit diff: 90 Data rate: 1.2Mb/s Leakage Current: 3.474uA Cryo temp = 129.2K (unchanged) Pressures stable AVG Pressures: YR07: 1.74e-10mbar YR08: 2.15e-9mbar YR09: 8.61e-10mbar YR10: 1.32e-10mbar
Attachment 1: 2022-02-23_03-58-03xyTotal.png

Attachment 2: 2022-02-23_03-57-34exTotal.png

Attachment 3: 2022-02-23_03-56-52exRate.png

249	Wed Feb 23 03:52:13 2022	Jordan, George	Current status
04:52 Pressure seems to be climbing a little but still stable (just peaked at end of check) Temps OK Write Speed: ~1.0Mb/s System Checks OK White Rabbit fail diff: 90 Leakage Current: 3.47uA Cryo Temp: 129.2K (unchanged) AVG Pressures: YR07: 1.79e-10mbar YR08: 2.3e-9mbar YR09: 9.46e-10mbar YR10: 1.41e10mbar Avg pressures plots for last hour and last 6 hours attached.
Attachment 1: 2022-02-23_04-58-19-XYtotal.png

Attachment 2: 2022-02-23_04-57-17-Ex-total-hist.png

Attachment 3: 2022-02-23_04-56-36-Ex-rate-hist.png

Attachment 4: pressures-1hour.jpg

Attachment 5: pressure-6hours.jpg

250	Wed Feb 23 04:55:48 2022	Jordan, George	Current status
05:55 Temps OK System Check OK White Rabbit fail diff: 90 Write Speed: ~1.0Mb/s Leakage Current: ~3.47uA Cryo Temp = 129.2K setpoint (unchanged) Pressures stable AVG Pressures: YR07: 1.79e-10mbar YR08: 2.21e-9mbar YR09: 8.64e-10mbar YR10: 1.36e-10mbar
Attachment 1: 2022-02-23_06-00-29xyTotal.png

Attachment 2: 2022-02-23_05-59-36exRate.png

Attachment 3: 2022-02-23_05-59-05exTotal.png

251	Wed Feb 23 06:00:25 2022	Jordan, George	Current status
07:00 Pressure Stable Temps OK System Check OK White Rabbit fail diff: 90 Write speed: ~1Mb/s Leakage Current: 3.47uA Cryo Temp Setpoint: 129.2K (unchanged) AVG Pressures: YR07: 1.66e-10mbar YR08: 1.93e-9mbar YR09: 7.63e-10mbar YR10: 1.26e-10mbar
Attachment 1: 2022-02-23_07-06-36exRate.png

Attachment 2: 2022-02-23_07-06-11exTotal.png

Attachment 3: 2022-02-23_07-05-42xyTotal.png

252	Wed Feb 23 06:58:19 2022	Laszlo, Thanassis	Current status
08:00 Temps OK System Check OK White Rabbit fail diff: 99 Write Speed: ~1.0Mb/s Leakage Current: ~3.47uA Cryo Temp = 129.2K setpoint (unchanged) Pressures stable AVG Pressures: YR07: 2.06e-10mbar YR08: 2.71e-9mbar YR09: 1.06e-9mbar (up from previous check) YR10: 1.78e-10mbar
Attachment 1: Screenshot_from_2022-02-23_08-08-36.png

Attachment 2: Screenshot_from_2022-02-23_08-08-16.png

Attachment 3: Screenshot_from_2022-02-23_08-07-48.png

Attachment 4: Screenshot_from_2022-02-23_08-07-21.png

Attachment 5: Screenshot_from_2022-02-23_08-05-30.png

Attachment 6: Screenshot_from_2022-02-23_08-05-11.png

Attachment 7: Screenshot_from_2022-02-23_08-04-42.png

Attachment 8: Screenshot_from_2022-02-23_08-04-01.png

Attachment 9: Screenshot_from_2022-02-23_08-02-57.png

Attachment 10: Screenshot_from_2022-02-23_08-02-19.png

Attachment 11: leakage-2022-02-23_08-00-38.png

253	Wed Feb 23 07:58:38 2022	Laszlo, Thanassis	Current status
09:00 Temps OK System Check OK White Rabbit fail diff: 101 Write Speed: ~1.2Mb/s Leakage Current: ~3.47uA Cryo Temp = 129.2K setpoint (unchanged) Pressures stable AVG Pressures: YR07: 1.88e-10mbar YR08: 2.28e-9mbar YR09: 9.15e-10mbar YR10: 1.52e-10mbar
Attachment 1: Screenshot_from_2022-02-23_09-03-08.png

Attachment 2: Screenshot_from_2022-02-23_09-02-35.png

Attachment 3: Screenshot_from_2022-02-23_09-02-20.png

Attachment 4: Screenshot_from_2022-02-23_09-02-04.png

Attachment 5: Screenshot_from_2022-02-23_09-01-50.png

Attachment 6: Screenshot_from_2022-02-23_09-01-36.png

Attachment 7: Screenshot_from_2022-02-23_09-01-15.png

Attachment 8: Screenshot_from_2022-02-23_09-00-35.png

Attachment 9: Screenshot_from_2022-02-23_08-59-04.png

Attachment 10: Screenshot_from_2022-02-23_08-58-46.png

254	Wed Feb 23 08:58:30 2022	Laszlo, Thanassis	Current status
10:00 Temps OK System Check OK White Rabbit fail diff: 102 Write Speed: ~1.2Mb/s Leakage Current: ~3.47uA Cryo Temp = 129.2K setpoint (unchanged) Pressures stable AVG Pressures: YR07: 1.93e-10mbar YR08: 2.64e-9mbar YR09: 1.13e-9mbar YR10: 1.55e-10mbar
Attachment 1: Screenshot_from_2022-02-23_10-03-03.png

Attachment 2: Screenshot_from_2022-02-23_10-02-49.png

Attachment 3: Screenshot_from_2022-02-23_10-02-18.png

Attachment 4: Screenshot_from_2022-02-23_10-01-48.png

Attachment 5: Screenshot_from_2022-02-23_10-01-33.png

Attachment 6: Screenshot_from_2022-02-23_10-01-21.png

Attachment 7: Screenshot_from_2022-02-23_09-59-58.png

Attachment 8: Screenshot_from_2022-02-23_09-59-39.png

Attachment 9: Screenshot_from_2022-02-23_09-59-14.png

Attachment 10: Screenshot_from_2022-02-23_09-58-59.png

256	Wed Feb 23 10:56:06 2022	Laszlo, Thanassis	Current status
11:55 Temps OK System Check OK White Rabbit fail diff: 102 Write Speed: ~1.2Mb/s Leakage Current: ~3.47uA Cryo Temp = 129.2K setpoint (unchanged) Pressures stable AVG Pressures: YR07: 1.99e-10mbar YR08: 2.6e-9mbar YR09: 1.03e-9mbar YR10: 1.7e-10mbar
Attachment 1: Screenshot_from_2022-02-23_11-55-28.png

Attachment 2: Screenshot_from_2022-02-23_11-55-08.png

Attachment 3: Screenshot_from_2022-02-23_11-54-49.png

Attachment 4: Screenshot_from_2022-02-23_11-54-37.png

Attachment 5: Screenshot_from_2022-02-23_11-54-26.png

Attachment 6: Screenshot_from_2022-02-23_11-54-07.png

Attachment 7: Screenshot_from_2022-02-23_11-53-51.png

Attachment 8: Screenshot_from_2022-02-23_11-53-38.png

Attachment 9: Screenshot_from_2022-02-23_11-53-26.png

Attachment 10: Screenshot_from_2022-02-23_11-52-51.png

276	Fri Feb 25 03:20:29 2022	Rui-Jiu Chen, Alex	Current status
Gleb Vorobyev tried for few hours to fix the ion source but without success. So, there will be no beam in CRYRING during this night shift. Today at about 08:00 the efforts to fix the ion source will be restarted.
279	Fri Feb 25 06:57:09 2022	George, Esther	Current status
08:00 Beam seems to be back Intensity ~7.8e7 Pressures OK System check OK White rabbit fail diff: 24 Write speed: ~1.3Mb/s Leakage current 3.49uA Cryostat Setpoint: 121.5K
Attachment 1: 2022-02-25_08-03-21leakage.png

280	Fri Feb 25 08:14:47 2022	George, Esther	Current status
9:14 Beam intensity around ~7.5e7 Pressures OK System check OK White rabbit fail diff: 24 Write speed: ~1.8Mb/s Leakage current 3.49uA Cryostat Setpoint: 121.5K

Goto page Previous 1, 2, 3 ... 26, 27, 28 ... 36, 37, 38 Next

ELOG V3.1.4-unknown