| ID |
Date |
Author |
Subject |
|
421
|
Tue Jul 18 08:16:28 2023 |
TD | Pumping down. Issues found with one detector. |
09.15 Following overnight pumping of CARME chamber by Leybold turbo
Pirani 1.00e-3 mbar IE514 2.83e-7 mbar
The Leybold IE514 gauge currently in use is the CARME unit ( serial # 1054 ). The calibration data can be found at https://elog.ph.ed.ac.uk/CARME/56
09.44 Pirani 1.00e-3 mbar IE514 2.71e-7 mbar
10.10 Leak tester attached to backing line
Valves to leak tester and turbo (connection to Edwards scroll pump in between) closed.
Stop Edwards scroll pump with magnetic valve 'red' button - magnetic valves closes and Edwards scroll pump is switched off.
Open valves to leak tester and then (slowly) turbo.
Wait for leak tester to settle in e-12 mbar.l/s range. Leak tester pressure 3.6e-3 mbar. IE514 2.69e-7 mbar.
11.00 Pirani 1.00e-3 mbar IE514 2.42e-7 mbar
Leak tester 1.8e-10 mbar.l/s
13.04 Pirani 1.00e-3 mbar IE514 2.06e-7 mbar
Leak testing.
Downstream DN100 flanges from CARME to dipole OK
Lower NEG power connector feedhtrough (downstream chamber) OK
Left hand side (looking downstream) bellows OK
c. few e-9 mbar.l/s leak bottom left (lookimg downstream) of COF600 wire seal
Additional torque to M16 bolts bottom left - c. 10 bolts -> 220Nm+
c. 0.1-0.3e-11 mbar.l/s
Further checks around circumference of COF600 seal reveal some small leaks c. e-11-12 mbar.l/s.? However background rate
in leak tester too high for sensitive test - will await recovery to resume checking.
14.00 Pirani 9.8e-4 mbar IE514 1.96e-7 mbar
Leak tester 4.9e-10 mbar.l/s
14.35 DSSSD test
IE514 OFF
Ambient temperature 21.5 deg C
Top right
-10V -4uA
-20V 10uA
c. -30V > -20uA trip
Top left
-150V -5.15uA
Bottom left
-150V -4.97uA
Bottom right
-150V -6.33uA
Top right (repeat)
-20V -10uA
-25V -14uA
15.28 IE514 ON
Pirani 9.8e-4 mbar IE514 1.87e-7 mbar
15.40 c. few e-9 mbar.l/s leak around magnetic valve - probably not an issue in terms of backing performance but may interfere with/confuse leak testing
16.05 Pirani 9.8e-4 mbar IE514 1.74e-7 mbar
Leak tester 1.2e-9 mbar.l/s
Will leave CARME pumping with leak tester on roughing line and see whether leak rate recovers. If so, will continue leak tests tomorrow.
18.50 Pirani 1.00e-3 mbar IE514 1.48e-7 mbar
Leak tester < 1e-12 mbar.l/s (leak tester valved off) |
|
422
|
Wed Jul 19 08:17:26 2023 |
TD | Leak testing |
09.16 Pirani 1.00e-3 mbar IE514 8.77e-8 mbar
Leak tester c. 5e-12 mbar.l/s (leak tester valved off)
09.48 Pirani 1.00e-3 mbar IE514 8.67e-8 mbar
Leak tester c. 3.5e-12 mbar.l/s (leak tester valved off)
10.33 Pirani 1.00e-3 mbar IE514 8.55e-8 mbar
Leak tester c. 4e-10 mbar.l/s (leak tester connected to CARME roughing line)
10.55 Leak tester remains at few e-10 mbar.l/s - we do not understand why
With leak tester in differential mode the highest reading around the COF600 seal is c. 3.5e-12 mbar.l/s
Following checks elsewhere on the chamber we observe c. 6e-12 mbar.l/s which presumably reflects accumulation of He around the chamber
Dispersing He with compressed air reduces diff mode reading to c. 2e-12 mbar.l/s
11.00 Pirani 9.80e-4 mbar IE514 8.47e-8 mbar
14.49 Pirani 1.00e-3 mbar IE514 7.71e-8 mbar
Leak tester isolated from CARME backing line - CARME Edwards scroll pump now backing turbo. |
|
423
|
Thu Jul 20 08:29:26 2023 |
TD | Installing tent. Two NEG power cable broken. |
09.28 Pirani 1.00e-3 mbar IE514 5.45e-8 mbar
12.10 Bakeout tent frame installed
SAES UHV1400 NEG pump power cables #1-6 installed
See attachments 1 & 2
16.35 Attachments 3-6
upstream baseplate
3x sets of heaters beneath CARME chamber connected to CRYRING heater/TC manifold - attachments 7-8
16.45 Pirani 1.00e-3 mbar IE514 4.80e-8 mbar
17.10 SAES D-2000 #1 downstream, outside NEG power + HV ( attachment 9 - OK cable connector )
SAES D-2000 #3 downstream, inside NEG power + HV
SAES D-2000 #4 upstream, inside HV
SAES D-2000 #2 upstream, outside HV
2x ( of 4x ) SAES D-2000 neg power cables were broken - forward-shell detached (unscrewed ) from back-shell remaining attached to D-2000 neg power connector.
Re-assembly is straightforward but it is unclear how the 6x female sockets are aligned with the connector keys of the forward-shell (attachments 10-11 cf. attachment 9).
Until this is understood these 2x SAES D-2000 neg power cables should not be used. |
| Attachment 1: 20230720_120957.jpg
|
|
| Attachment 2: 20230720_121016.jpg
|
|
| Attachment 3: 20230720_162938.jpg
|
|
| Attachment 4: 20230720_163700.jpg
|
|
| Attachment 5: 20230720_163651.jpg
|
|
| Attachment 6: 20230720_163655.jpg
|
|
| Attachment 7: 20230721_093447.jpg
|
|
| Attachment 8: 20230721_093452.jpg
|
|
| Attachment 9: 20230721_092923.jpg
|
|
| Attachment 10: 20230721_094608.jpg
|
|
| Attachment 11: 20230721_094642.jpg
|
|
|
443
|
Mon Sep 25 16:33:32 2023 |
TD | Removed tape from heaters TC |
17.33 IE514 pressure 6.4e-11 mbar, ambient temperature +20.8 deg C
The thermocouples on the 3x groups of heater elements have been detached from direct contact with the heating element and now float abpove the heating element by 2-
3cm - see attachments 1 & 2
The vacuum group IE514 and Ametek RGA are still attached to CARME - see attachment 3. Have requested vacuum group remove them.
The 'air side' of the Be window on the interaction chamber is under vacuum provided by small Agilent scroll pump.
|
| Attachment 1: 1000007072.jpg
|
|
| Attachment 2: 1000007067.jpg
|
|
| Attachment 3: 1000007070.jpg
|
|
|
444
|
Tue Sep 26 08:08:42 2023 |
TD | Tuesday 26 September |
09.07 IE514 pressure 6.4e-11 mbar, ambient temperature +20.3 deg C
Using appc218 ( account carme ) workstation by the CARME 19" rack
ssh pi@carmebakingpi
Re-connect to bakeout monitor app
screen -dR
See attcahment 1
12.02 Vacuum group ion pump disconnected and RGA removed from CARME chamber - outside of CARME bakeout tent 'closed' - see attachments 2-4
Vacuum group IE514 to be disconnected
14.45 Vacuum group disconnect their IE514
Inside of CARME bakeout tent closed
Photos of the CARME bakeout tent inside and outside CRYRING - see attachments 5-7 |
| Attachment 1: 1000007087.jpg
|
|
| Attachment 2: 1000007090.jpg
|
|
| Attachment 3: 1000007091.jpg
|
|
| Attachment 4: 1000007089.jpg
|
|
| Attachment 5: 1000007096.jpg
|
|
| Attachment 6: 1000007095.jpg
|
|
| Attachment 7: 1000007094.jpg
|
|
|
445
|
Tue Sep 26 10:13:14 2023 |
TD | ELOTECH PID Temperature Controller R4000 manual ( German and English ) |
|
| Attachment 1: BA-Isoheat_R4000-XX-X-000-X-X_DE_V1.03.pdf
|
|
| Attachment 2: R4000-XX-X-000-X-X_EN_V1.30.pdf
|
|
|
446
|
Wed Sep 27 15:56:41 2023 |
TD | Wednesday 27 September |
16.55 CARME IE514 8.2e-11 mbar
Vacuum pressure increased slowly overnight from c. 6e-11 mbar yesterday to c. 8e-11 mbar today following low power startup tests of the bakeout controller heating
the CARME interaction and detector chambers yesterday and today.
Attachment 1 - bakeout controller config courtesy Anton Kalinin
Attachments 2 & 3 - bakeout controller summary displays and CARME bakeout monitor display c. 17.00 today
The 3x CARME heaters are connected to controller #4 zones # 1-3, i.e. lower right display, zones 1-3, mains fuses F9-F11
17.30 3x ( of 4x ) SAES D-2000 ion pump controllers ( SIP modules ) switched off. Fourth controller was already switched off and SHV cable disconnected from rear panel of
SIP module. |
| Attachment 1: 1000007129.jpg
|
|
| Attachment 2: 1000007127.jpg
|
|
| Attachment 3: 1000007128.jpg
|
|
|
447
|
Thu Sep 28 09:19:50 2023 |
TD | Thursday 28 September |
10.20 CARME IE514 8.6e-11 mbar
CARME bakeout monitor and ELOTECH bakeout controller status - see attachments 1 & 2
The CARME bakeout monitor shows recovery from test yesterday evening. The ELOTECH controller was switched to manual mode for the 3x CARME zones and 5% power selected
for 45 minutes. CARME TCs increased from mid-20s to high 20s/low 30s over a period of 45 minutes. At the conclusion of the test power was set to 0% for all 3x CARME zones
and the mode changed from manual to controlled. |
| Attachment 1: 1000007142.jpg
|
|
| Attachment 2: 1000007143.jpg
|
|
|
448
|
Fri Sep 29 08:54:29 2023 |
TD | Friday 29 September |
09.50 CARME IE514 9.0e-11 mbar, ambient temperature 21.3 deg C
CARME bakeout monitor and ELOTECH temperature controller - attachments 1 & 2
10.15 Commence bakeout ramp
Set all ELOTECH PID temperature controller zones ( channels ) to 50 deg C
Expect all non-CARME zones to reach temperature set point quickly. There will be a delay for the TCs corresponding to the CARME heaters but the internal CAME TCs
will respond more slowly- will observe response of CARME TCs over time.
10.35 ELOTECH temperature controller - attachment 3
11.10 CARME TCs change from c. 25-28 deg C to 28-35 deg C
11.15 Set all ELOTECH PID temperature controller zones ( channels ) to 100 deg C
12.15 CARME IE514 1.39e-10 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor and ELOTECH temperature controller - attachments 4 & 5
14.20 CARME IE514 3.62e-10 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH temperature controller front panel and Grafana bakeout dashboard- attachments 6-8
15.20 Whilst all of the ELOTECH temperature controller TCs are at their current set point ( 100 deg C ), the CARME TCs are not yet at equilibrium. Plan to leave system
in current state until tomorrow morning. Assuming CARME is at equilibrium will then increment ELOTECH temperature controller TC set points.
17.50 CARME IE514 6.59e-10 mbar, ambient temperature 20.6 deg C
CARME bakeout monitor, ELOTECH temperature controller front panel and Grafana bakeout dashboard- attachments 9-11 |
| Attachment 1: 1000007175.jpg
|
|
| Attachment 2: 1000007174.jpg
|
|
| Attachment 3: 1000007176.jpg
|
|
| Attachment 4: 1000007178.jpg
|
|
| Attachment 5: 1000007177.jpg
|
|
| Attachment 6: 1000007189.jpg
|
|
| Attachment 7: 1000007190.jpg
|
|
| Attachment 8: 1000007188.jpg
|
|
| Attachment 9: 1000007227.jpg
|
|
| Attachment 10: 1000007228.jpg
|
|
| Attachment 11: 1000007229.jpg
|
|
|
449
|
Sat Sep 30 10:58:14 2023 |
TD | Saturday 30 September |
10.50 CARME IE514 7.14e-10 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 1-3
Change ELOTECH R4000 set points for CARME heaters #1 and #3 to 125 deg C
14.20 CARME IE514 8.25e-10 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 4-6
Change ELOTECH R4000 set points for CARME heaters #1 and #3 to 150 deg C
18.30 CARME IE514 1.29e-9 mbar, ambient temperature 20.7 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 7-9
Change ELOTECH R4000 set points for CARME heaters #1 and #3 to 175 deg C and heater #2 to 125 deg C |
| Attachment 1: 1000007236.jpg
|
|
| Attachment 2: 1000007239.jpg
|
|
| Attachment 3: 1000007237.jpg
|
|
| Attachment 4: 1000007251.jpg
|
|
| Attachment 5: 1000007250.jpg
|
|
| Attachment 6: 1000007252.jpg
|
|
| Attachment 7: 1000007256.jpg
|
|
| Attachment 8: 1000007257.jpg
|
|
| Attachment 9: 1000007255.jpg
|
|
|
450
|
Sun Oct 1 10:24:50 2023 |
TD | Sunday 1 October |
11.20 CARME IE514 3.53e-9 mbar, ambient temperature 20.6 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 1-3
Change ELOTECH R4000 set points for CARME heaters #1 and #3 to 200 deg C, heater #2 to 150 deg C
14.10 CARME IE514 6.12e-9 mbar, ambient temperature 20.7 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 4-6
Change ELOTECH R4000 set points for CARME heaters #1, #2 and #3 to 225, 175 and 225 deg C respectively.
18.10 CARME IE514 1.92e-8 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 7-9
Change ELOTECH R4000 set points for CARME heaters #1, #2 and #3 to 250, 150 and 225 deg C respectively.
All other ( active ) ELOTECH R4000 set points ( interaction chamber etc ) to 130 deg C.
20.25 CARME IE514 2.14e-8 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 10-12
No change to ELOTECH R4000 set points |
| Attachment 1: 1000007352.jpg
|
|
| Attachment 2: 1000007354.jpg
|
|
| Attachment 3: 1000007353.jpg
|
|
| Attachment 4: 1000007360.jpg
|
|
| Attachment 5: 1000007358.jpg
|
|
| Attachment 6: 1000007361.jpg
|
|
| Attachment 7: 1000007368.jpg
|
|
| Attachment 8: 1000007369.jpg
|
|
| Attachment 9: 1000007370.jpg
|
|
| Attachment 10: 1000007377.jpg
|
|
| Attachment 11: 1000007375.jpg
|
|
| Attachment 12: 1000007374.jpg
|
|
|
451
|
Mon Oct 2 08:41:43 2023 |
TD | Monday 2 October |
09.35 CARME IE514 1.95e-8 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 1-3
No change to ELOTECH R4000 set point
17.45 CARME IE514 1.91e-8 mbar, ambient temperature 20.8 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 4-6
No change to ELOTECH R4000 set point |
| Attachment 1: 1000007409.jpg
|
|
| Attachment 2: 1000007408.jpg
|
|
| Attachment 3: 1000007407.jpg
|
|
| Attachment 4: 1000007416.jpg
|
|
| Attachment 5: 1000007415.jpg
|
|
| Attachment 6: 1000007413.jpg
|
|
|
452
|
Tue Oct 3 08:48:36 2023 |
TD | Tuesday 3 October |
09.40 CARME IE514 1.79e-8 mbar, ambient temperature 20.7 deg C
CARME bakeout monitor, ELOTECH R4000 temperature controller front panel and Grafana bakeout dashboard- attachments 1-3
No change to ELOTECH R4000 set point |
| Attachment 1: 1000007432.jpg
|
|
| Attachment 2: 1000007431.jpg
|
|
| Attachment 3: 1000007434.jpg
|
|
|
470
|
Tue Jan 16 14:36:30 2024 |
TD | CARME configuration |
FEE64
#1 - #16 -> aida01 - aida16
Network configuration - /etc/dhcpd/dhcpd.conf - attachment 1
MIDAS Options
Added Options sub-directories for aida09-aida16 - attachment 2
MIDAS ASIC settings
Added sub-directories for aida09-aida16 - attachment 3
MIDAS configuration - /MIDAS/config/TclHttpd/carme-gsi"8015 - attachment 4
Currently only aida01-aida08 defined
MIDAS embedded rfs filesystems for aida01-aida24 alreday exist - attachment 5
All FEE64s connected to rev B CARME adaptor PCBs
LK1 fitted to n+n bias FEE64 ( aidaxx, aidaxx, aidaxx, aidaxx )
No other LKs fitted
MACB
WR source NIM WR emulator or VETAR2
See https://elog.ph.ed.ac.uk/DESPEC/517 for MACB mode configuration
CAEN N1419ET
EG&G Ortec 448 Pulser
ASIC settings
Options |
| Attachment 1: dhcpd.conf
|
#
# DHCP Server Configuration file.
# see /usr/share/doc/dhcp*/dhcpd.conf.example
# see dhcpd.conf(5) man page
#
# 2 days
#default-lease-time 172800;
# 4 days
default-lease-time 345600;
# 8 days
max-lease-time 691200;
option domain-search code 119 = string;
option domain-name "dl.ac.uk";
option domain-name-servers 193.62.115.16, 148.79.80.78;
option netbios-name-servers 148.79.160.89;
option netbios-node-type 8;
option nis-domain "nuclear.physics";
option nis-servers 193.62.115.77;
subnet 192.168.11.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.11.255;
pool {
range 192.168.11.118 192.168.11.199;
}
}
group {
use-host-decl-names true;
default-lease-time 3600;
max-lease-time 14400;
server-name "192.168.11.99";
next-server 192.168.11.99;
host nnrpi1 {
hardware ethernet dc:a6:32:1d:21:db;
fixed-address 192.168.11.251;
}
host nnrpi2 {
hardware ethernet b8:27:eb:40:53:e8;
fixed-address 192.168.11.117;
}
host aida01 {
hardware ethernet d8:80:39:41:d8:20;
fixed-address 192.168.11.1;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida01";
}
host aida02 {
hardware ethernet d8:80:39:41:d8:2a;
fixed-address 192.168.12.2;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida02";
}
host aida03 {
hardware ethernet d8:80:39:41:d0:05;
fixed-address 192.168.11.3;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida03";
}
host aida04 {
hardware ethernet d8:80:39:41:b4:0b;
fixed-address 192.168.11.4;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida04";
}
host aida05 {
hardware ethernet d8:80:39:42:0d:0c;
fixed-address 192.168.11.5;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida05";
}
host aida06 {
hardware ethernet d8:80:39:41:d7:cd;
fixed-address 192.168.11.6;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida06";
}
host aida07 {
hardware ethernet d8:80:39:41:d4:16;
fixed-address 192.168.11.7;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida07";
}
host aida08 {
hardware ethernet d8:80:39:41:ba:2b;
fixed-address 192.168.11.8;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida08";
}
host aida09 {
hardware ethernet d8:80:39:41:d0:0e;
fixed-address 192.168.11.9;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida09";
}
host aida10 {
hardware ethernet d8:80:39:41:d8:2b;
fixed-address 192.168.11.10;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida10";
}
host aida11 {
hardware ethernet d8:80:39:41:d7:cc;
fixed-address 192.168.11.11;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida11";
}
host aida12 {
hardware ethernet d8:80:39:41:d7:c2;
fixed-address 192.168.11.12;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida12";
}
host aida13 {
hardware ethernet d8:80:39:41:ba:22;
fixed-address 192.168.11.13;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida13";
}
host aida14 {
hardware ethernet d8:80:39:41:ee:72;
fixed-address 192.168.11.14;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida14";
}
host aida15 {
hardware ethernet d8:80:39:41:ee:71;
fixed-address 192.168.11.15;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida15";
}
host aida16 {
hardware ethernet d8:80:39:41:a0:71;
fixed-address 192.168.11.16;
option root-path "/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida16";
}
}
subnet 192.168.12.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.12.255;
pool {
range 192.168.12.100 192.168.12.199;
}
}
group {
use-host-decl-names true;
default-lease-time 3600;
max-lease-time 14400;
server-name "192.168.12.99";
next-server 192.168.12.99
}
|
| Attachment 2: Options
|
[npg@carme-gsi Options]$ pwd
/MIDAS/DB/EXPERIMENTS/AIDA/Options
[npg@carme-gsi Options]$ ls -lR
.:
total 0
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida01
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida02
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida03
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida04
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida05
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida06
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida07
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida08
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida09
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida10
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida11
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida12
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida13
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida14
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida15
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida16
./aida01:
total 4
-rwxrwxr-x. 1 npg npg 1027 Nov 28 2022 CONTENTS
./aida02:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 19 2022 CONTENTS
./aida03:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 13 2022 CONTENTS
./aida04:
total 4
-rwxrwxr-x. 1 npg npg 1026 Dec 1 2022 CONTENTS
./aida05:
total 4
-rwxrwxr-x. 1 npg npg 1027 Nov 30 2022 CONTENTS
./aida06:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 4 2022 CONTENTS
./aida07:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 31 2022 CONTENTS
./aida08:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 4 2022 CONTENTS
./aida09:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida10:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida11:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida12:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida13:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida14:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida15:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida16:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
[npg@carme-gsi Options]$ pwd
/MIDAS/DB/EXPERIMENTS/AIDA/Options
[npg@carme-gsi Options]$ ls -lR
.:
total 0
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida01
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida02
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida03
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida04
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida05
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida06
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida07
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida08
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida09
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida10
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida11
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida12
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida13
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida14
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida15
drwxrwxr-x. 2 npg npg 22 Jan 18 15:15 aida16
./aida01:
total 4
-rwxrwxr-x. 1 npg npg 1027 Nov 28 2022 CONTENTS
./aida02:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 19 2022 CONTENTS
./aida03:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 13 2022 CONTENTS
./aida04:
total 4
-rwxrwxr-x. 1 npg npg 1026 Dec 1 2022 CONTENTS
./aida05:
total 4
-rwxrwxr-x. 1 npg npg 1027 Nov 30 2022 CONTENTS
./aida06:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 4 2022 CONTENTS
./aida07:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 31 2022 CONTENTS
./aida08:
total 4
-rwxrwxr-x. 1 npg npg 1026 Feb 4 2022 CONTENTS
./aida09:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida10:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida11:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida12:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida13:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida14:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida15:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
./aida16:
total 4
-rwxrwxr-x. 1 npg npg 1026 Jan 18 15:15 CONTENTS
[npg@carme-gsi Options]$ cat aida02/CONTENTS
Index string Stat.offset&&Aida_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida.Vchannels&&ASIC.settings&&Aida_Hist_D_Enable&&WAVE_DMA_HWM&&Stat.shift&&Aida.Wchannels&&Aida_Hist_V_Enable&&Include.Aida&&Aida.channels&&DataAcqPgm&&Aida_Hist_H_Enable&&DataFormat&&ASIC_DMA_HWM&&Aida_Hist_L_Enable
Stat.offset string 64
Aida_Hist_W_Enable string 1
Aida.shift string 0
TS_SYNC_PHASE string 0x0
ExtClk string 1
Aida.offset string 0
MACB_TRIG_MODE string 4
RunNumber string 63
Rate.channels string 512
Aida_GroupBase string 1
Stat.channels string 512
Aida_Hist_D_Enable string 1
ASIC.settings string 2022Jan31-11-52-00
Aida.Vchannels string 256
WAVE_DMA_HWM string 0x0007ffff
Aida.Wchannels string 1020
Stat.shift string 6
Include.Aida string 0
Aida_Hist_V_Enable string 0
Aida.channels string 65536
DataFormat string 0x0000
DataAcqPgm string AidaExecV9
Aida_Hist_H_Enable string 1
ASIC_DMA_HWM string 0x000fffff
Aida_Hist_L_Enable string 1
|
| Attachment 3: Settings
|
[npg@carme-gsi 2022Jan31-11-52-00]$ pwd
/MIDAS/DB/EXPERIMENTS/AIDA/2022Jan31-11-52-00
[npg@carme-gsi 2022Jan31-11-52-00]$ ls -lR
.:
total 0
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida01
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida02
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida03
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida04
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida05
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida06
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida07
drwxrwxr-x. 2 npg npg 22 Jan 31 2022 aida08
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida09
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida10
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida11
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida12
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida13
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida14
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida15
drwxrwxr-x. 2 npg npg 22 Jan 18 15:21 aida16
./aida01:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida02:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida03:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida04:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida05:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida06:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida07:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida08:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 31 2022 CONTENTS
./aida09:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida10:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida11:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida12:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida13:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida14:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida15:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
./aida16:
total 4
-rwxrwxr-x. 1 npg npg 2726 Jan 18 15:21 CONTENTS
[npg@carme-gsi 2022Jan31-11-52-00]$ cat aida02/CONTENTS
ASIC.1.3 string 0x02
ASIC.2.19 string 0x5c
ASIC.2.20 string 0x68
ASIC.1.4 string 0x07
ASIC.2.21 string 0x0f
ASIC.2.22 string 0x5c
ASIC.1.5 string 0x08
ASIC.1.6 string 0x09
ASIC.2.23 string 0x08
ASIC.2.24 string 0x68
ASIC.1.7 string 0x05
ASIC.2.25 string 0x08
ASIC.1.8 string 0x00
ASIC.2.26 string 0xbf
ASIC.1.9 string 0x0f
ASIC.2.0 string 0x04
ASIC.2.1 string 0x05
ASIC.3.10 string 0x00
ASIC.2.2 string 0x06
ASIC.3.11 string 0x0d
ASIC.2.3 string 0x02
ASIC.3.12 string 0x64
ASIC.2.4 string 0x07
ASIC.3.13 string 0x34
ASIC.2.5 string 0x08
ASIC.3.14 string 0x02
ASIC.2.6 string 0x09
ASIC.3.15 string 0xff
ASIC.2.7 string 0x05
ASIC.3.16 string 0xd2
ASIC.2.8 string 0x00
ASIC.3.17 string 0x80
ASIC.2.9 string 0x0f
ASIC.3.18 string 0xb2
WAVE.0 string 0x00000000
ASIC.3.20 string 0x68
ASIC.3.19 string 0x5c
WAVE.1 string 0x00000000
ASIC.3.21 string 0x0f
WAVE.2 string 0x00000000
LED.0 string 0x00011d4c
ASIC.3.22 string 0x5c
WAVE.3 string 0x00000000
LED.1 string 0x0000ffff
ASIC.3.23 string 0x08
LED.2 string 0x00011b58
ASIC.3.24 string 0x68
ASIC.1.10 string 0x00
LED.3 string 0x00000000
ASIC.3.25 string 0x08
ASIC.3.0 string 0x04
ASIC.3.26 string 0xbf
ASIC.1.11 string 0x0d
LED.4 string 0x00011b58
LED.5 string 0x00000000
ASIC.3.1 string 0x05
ASIC.1.12 string 0x64
ASIC.1.13 string 0x34
ASIC.3.2 string 0x06
LED.6 string 0x00011b58
LED.7 string 0x00000000
ASIC.1.14 string 0x02
ASIC.3.3 string 0x02
ASIC.1.15 string 0xff
ASIC.3.4 string 0x07
LED.8 string 0x000003fc
LED.9 string 0x000000c8
ASIC.1.16 string 0xd2
ASIC.3.5 string 0x08
ASIC.1.17 string 0x80
ASIC.3.6 string 0x09
ASIC.1.18 string 0xb2
ASIC.3.7 string 0x05
ASIC.1.20 string 0x68
ASIC.3.8 string 0x00
ASIC.1.19 string 0x5c
ASIC.3.9 string 0x0f
ASIC.1.21 string 0x0f
ASIC.4.10 string 0x00
ASIC.1.22 string 0x5c
ASIC.1.23 string 0x08
ASIC.4.11 string 0x0d
ASIC.4.12 string 0x64
ASIC.1.24 string 0x68
ASIC.1.25 string 0x08
ASIC.4.13 string 0x34
ASIC.4.14 string 0x02
ASIC.1.26 string 0xbf
ASIC.4.15 string 0xff
ASIC.4.16 string 0xd2
DISC.6 string 0x00000002
DISC.7 string 0x24800000
ASIC.4.0 string 0x04
ASIC.4.17 string 0x80
ASIC.4.18 string 0xb2
ASIC.4.1 string 0x05
ASIC.4.20 string 0x68
ASIC.4.2 string 0x06
ASIC.4.19 string 0x5c
ASIC.4.3 string 0x02
ASIC.4.21 string 0x0f
ASIC.4.22 string 0x5c
ASIC.4.4 string 0x07
ASIC.4.5 string 0x08
ASIC.4.23 string 0x08
ASIC.4.24 string 0x68
ASIC.4.6 string 0x09
ASIC.2.10 string 0x00
ASIC.4.7 string 0x05
ASIC.4.25 string 0x08
ASIC.4.26 string 0xbf
ASIC.4.8 string 0x00
ASIC.2.11 string 0x0d
ASIC.2.12 string 0x64
ASIC.4.9 string 0x0f
ASIC.2.13 string 0x34
ASIC.2.14 string 0x02
ASIC.2.15 string 0xff
ASIC.2.16 string 0xd2
ASIC.1.0 string 0x04
ASIC.1.1 string 0x05
ASIC.2.17 string 0x80
ASIC.2.18 string 0xb2
ASIC.1.2 string 0x06
|
| Attachment 4: startup.tcl
|
Setting BGColor "BlanchedAlmond"
Setting TextColor "red"
Setting ProjectName AIDA
Setting ProjectImage AIDA.gif
Setting ProjectURL "http://npg.dl.ac.uk/NPG/Projects/Fair.html"
Setting Option1Name STFC
Setting Option1URL "stfc.ac.uk"
Setting Option1Image stfc.jpg
# global MessageLoggerServerHost
# set MessageLoggerServerHost nndhcp077.dl.ac.uk
# package require MessageLoggerClient
# Setting Option3Name "Elog Server"
# Setting Option3URL "http://nndhcp077.dl.ac.uk:8080/DataAcq/"
# Install required services
if {![namespace exists ::AIDA]} {namespace eval ::AIDA {puts "created namespace ::AIDA"}}
# set ::AIDA::TestMode 1
global SpectrumServerHost
set SpectrumServerHost aidas
package require XAIDAAccessClient ;# for Client end - ie AIDA server workstation sets MIDAS_XAIDAAccessClient_Exists (SOAP)
package require XAD9252AccessClient ;# for Client end - ie AIDA server workstation sets MIDAS_XAD9252AccessClient_Exists (SOAP)
namespace eval DataAcquisition {
variable PROJECT AIDA
variable ACQSERVERS
set ACQSERVERS [list aida01 aida02 aida03 aida04 aida05 aida06 aida07 aida08]
variable ACQSERVER [first $ACQSERVERS]
variable DataTransferStreams; set DataTransferStreams 2
# set ::DataAcquisition::EnableMerger 1
# set ::DataAcquisition::EnableTape 1
variable RDOGo 0
}
namespace eval AIDA {
variable ModuleMenu; set ModuleMenu $::DataAcquisition::ACQSERVERS
variable TSMaster; set TSMaster aida01
variable FEE64 [first $ModuleMenu]
variable ConfigBase; set ConfigBase [file join $env(MIDASBASE) config TclHttpd]
}
Setting DataBaseRoot "/MIDAS/DB"
package require DataBaseAccessServer
package require NetVarsServer 1.1
package require SigTaskServer
# package require MemSasServer
# Install services for Run Control
namespace eval $::DataAcquisition::PROJECT {
variable DBRootName [file join EXPERIMENTS AIDA]
variable DBNodeBase 2012
}
package require AIDARunControl
# package require TapeServer
# package require MergerControl
# package require MERGERunControl
Setting Option7Name "Project Home Page"
Setting Option7URL "http://npg.dl.ac.uk/NPG/Projects/Fair.html"
Setting Option8Name "Server Software Home Page"
Setting Option8URL "http://npg.dl.ac.uk/MIDAS/download/WebServices.html"
|
| Attachment 5: rfs
|
[npg@carme-gsi rfs]$ pwd
/MIDAS/Embedded/XilinxLinux/ppc_4xx/rfs
[npg@carme-gsi rfs]$ ls -l
total 1491780
drwxrwxrwx. 19 10101 500 227 Dec 1 2022 aida01
drwxrwxrwx. 19 10101 500 227 Dec 1 2022 aida02
drwxrwxrwx. 19 10101 500 227 Dec 1 2022 aida03
drwxrwxrwx. 19 10101 500 227 Dec 1 2022 aida04
drwxrwxrwx. 19 10101 500 227 Dec 1 2022 aida05
drwxrwxrwx. 19 10101 500 227 Feb 10 2022 aida06
drwxrwxrwx. 19 10101 500 227 Feb 10 2022 aida07
drwxrwxrwx. 19 10101 500 227 Feb 10 2022 aida08
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida09
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida10
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida11
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida12
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida13
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida14
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida15
drwxrwxrwx. 19 10101 500 227 Oct 29 2021 aida16
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida17
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida18
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida19
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida20
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida21
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida22
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida23
drwxrwxrwx. 19 10101 500 227 Apr 28 2021 aida24
-rw-r--r--. 1 root root 1527582720 Apr 28 2021 rfs.tar
|
|
471
|
Tue Jan 16 16:01:48 2024 |
TD | Change CARMEraspberrypi to nnrpi1 |
Change RPi from CARMEraspberrypi to nnrpi1 to provide carme-gsi access to Rly16 to control USB-controlled ac mains relay.
nnrpi1 is already defined in carme-gsi:/etc/dhcp/dhcpd.conf
Transfer RPi network connection from CRYRING local network to AIDA 24-port network Gbit switch
Change /etc/hostname from
CARMEraspberrypi
to
nnrpi1
Change /etc/hosts from
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
127.0.1.1 raspberrypi
to
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
127.0.1.1 nnrpi1
Reboot RPi
Login to RPi and start MIDAS 8015 service
/MIDAS/TclHttpd/linux-arm/TclHttpd-server &
Open new browser tab on carme-gsi
http://nnrpi1:8015/AIDA/Rly16/Rly16.tml |
| Attachment 1: Capture.PNG
|
|
|
472
|
Wed Jan 17 10:31:05 2024 |
TD | Remote control of CAEN N1419ET from nnrpi1 |
Login to nnrpi1 from carme-gsi using ssh
Execute the caen_screen.sh script
pi@nnrpi1:~ $ cat ./caen_screen.sh
if ! screen -list | grep -q "caenhv"; then
screen -f -S caenhv /dev/ttyACM0 9600
else
screen -x caenhv
fi
pi@nnrpi1:~ $ ./caen_screen.sh
Enter the text string 'caen'
If the CAEN display program is already running you will only see page updates/changes.
- enter q ( quit ) and then d ( display ) to re-display the entire screen.
See attachment 1 |
| Attachment 1: Capture.PNG
|
|
|
473
|
Wed Jan 17 19:15:47 2024 |
TD | Wednesday 17 January |
CAEN N1419ET remote control via carme-gsi and nnrpi1 - see https://elog.ph.ed.ac.uk/CARME/472
15x ( of 16x ) AIDA power cables available, labelled #1 - #15, installed
16x ( of 16x ) RJ45 Cat 6 network cables available, 15x labelled #1 - #15
16x ( of 16x ) HDMI cables available, labelled #1 - #16 |
|
474
|
Wed Jan 17 19:21:20 2024 |
TD | AIDA spares |
Spare AIDA hardware
1x AIDA FEE64 PSU
1x USB-controlled ac mains relay
Transferred from EX 2.039 store ( ESR roof ) to CARME storage bins adjacent to CRYRING counting room ( CRYRING roof ).
CRYRING Hall
12 USB-Jtag cables ( sys console ) + 1x to Edinburgh Jan 2024 to fabricate more with spare Jtag PCBs
7x HDMI FEE64 - MACB cables
0x 0.3m HDMI-HDMI cables - require 8x 0.3m HDMI - HDMI cables + 2x 3m HDMI-HDMI cables
2x MACB
1x NIM WR emulator
1x Dlink 7 port USB extender
1x Netgear 24-port Gbit network switch
1x CAEN N1419ET ( ch #0 u/s ? )
0x 10m RJ45 Cat 6 network cables yellow/green/purple/brown - require 2x of each |
|
475
|
Thu Jan 18 17:21:00 2024 |
TD | Thursday 18 January |
Network ( dhcpd.conf ) and MIDAS startup.tcl/Options/ASIC settings/rfs filesystems configured
17.20 CARME IE514 4.1e-11mbar, ambient temperature 16.7 deg C
Pressure appears to be drifting upwards - see attachment 1 |
| Attachment 1: Capture.PNG
|
|
|
477
|
Mon Jan 22 16:29:31 2024 |
TD | Saturday 20 January |
11.00 No WLAN/WiFi
came-gsi private LAN appears to be OK
AIDA FEE64 power ON
11.09 FEE64 temps - attachment 1
aida06 low, otherwise OK
11:10 CARME IE514 4.0e-11 mbar, temp unknown
IE514 OFF
11.22 Detector bias ON - attachment 2
found ch 2 up ramp set to 63V/s! changed to 1V/s
11.30 system wide checks OK except
aida02 & aida06 fail WR decoder status
WR ts control - attachments 3-4
12.02 ASIC settings updated for aida09-aida16
ASIC settings DB key 2024Jan20-12:02:08
Unable to save DB key to Options - use ASIC settings restore as workaround
12.30 Layouts for 16x FEE64s created - directory ~/LayOut/16xFEE64
Note layouts include spectra from aida07, aida08 and aida16 so an error message will be generated but it can be ignored
12.40 per FEE64 Rate spectra - attachments 5-6
per FEE64 p+n & nn 1.8.W spectra - attachments 7-8
12.57 per FEE64 p+n & n+n 1.8.W spectra 20us FSR - attachments 9-10
Test signals
EG&G Ortec 448 Pulser
Amplitude 90,000
attenuation x10
Normalise 5.00
t_r 100ns
tau_d 50us
Frequency 50Hz ( relay line freq )
Polarity +
test + direct from 448, test - from Cooknell SA1 Sum & Invert
Test + daisy chain -> aida01 - aida02 - aida05 - aida06 - 50 Ohm
Test - daisy chain -> aida03 - aida04 - aida07 - aida08 - 50 Ohm
aida08 ( DSSSD #2 n+n Ohmic bias ) LK2 removed, LK1 added
aida04 ( DSSSD #1 n+n Ohmic bias ) no LK2 fitted, LK1 added
DSSSD#1 SHV - 2x Lemo 00.250 cable replaced by standard SHV - BNC/BNC Lemo-00.250 coaxial cable
Adaptor PCB ground daisy chain aida01 - aida02 - aida03 - aida04
DSSSD#2 - DSSSD#4 HV cabling unchanged
15.30 Power ON
System wide checks OK except
aida02 fail WR decoder status - attachment 11
FEE64 temperatures - attachment 12
aida06 ASIC temp low
DSSSD bias - attachment 13
ADC data item stats - attachment 14
slow comparator 0x64
per FEE64 Rate and 1.8.W 20us FSR spectra - attachments 15-17
16.00 per FEE64 rate spectra - attachment 18
16.15 per FEE64 Rate and 1.8.W 20us FSR spectra - attachments 19-21
17.36 Switch from VETAR2 ( all MACB modules mode 0x3 ) to NIM WR emulator ( root MACB module 0xd, all others 0x3 )
All FEE64s fail Global clock and WR decoder - attachments 22-24
WR timetsamp control - attachment 25
18.10 Noted MACB #4 mode actually set to 0x2 *not* 0x3 - changed to 0x3
Re-test with VETAR2 WR - same behaviour as observed this morning - see attachments 26-30
Summary
n+n sides appear to be OK but noisy
no data observed from aida06 & aida11
aida11 known to be disconnected from adaptor PCB
aida15 asic #2 may be faulty
aida01, aida05, aida12 - data suggest FEE64/adaptor PCB alignment issue ?
aida02, aida03, aida09, aida14 - data suggest adaptor PCB damaged pins ?
aida07 - network config issue ?
aida08 - not completing boot
need to attach sys console to aida07 & aida08 to diagnose problem. |
| Attachment 1: Screenshot_from_2024-01-20_11-10-03.png
|
|
| Attachment 2: Screenshot_from_2024-01-20_11-22-20.png
|
|
| Attachment 3: Screenshot_from_2024-01-20_11-31-31.png
|
|
| Attachment 4: Screenshot_from_2024-01-20_11-31-39.png
|
|
| Attachment 5: Screenshot_from_2024-01-20_12-18-27.png
|
|
| Attachment 6: Screenshot_from_2024-01-20_12-18-37.png
|
|
| Attachment 7: Screenshot_from_2024-01-20_12-44-07.png
|
|
| Attachment 8: Screenshot_from_2024-01-20_12-42-58.png
|
|
| Attachment 9: Screenshot_from_2024-01-20_12-59-12.png
|
|
| Attachment 10: Screenshot_from_2024-01-20_13-00-18.png
|
|
| Attachment 11: Screenshot_from_2024-01-20_15-30-48.png
|
|
| Attachment 12: Screenshot_from_2024-01-20_15-40-44.png
|
|
| Attachment 13: Screenshot_from_2024-01-20_15-40-58.png
|
|
| Attachment 14: Screenshot_from_2024-01-20_15-43-06.png
|
|
| Attachment 15: Screenshot_from_2024-01-20_15-44-18.png
|
|
| Attachment 16: Screenshot_from_2024-01-20_15-45-14.png
|
|
| Attachment 17: Screenshot_from_2024-01-20_15-45-47.png
|
|
| Attachment 18: Screenshot_from_2024-01-20_16-03-18.png
|
|
| Attachment 19: Screenshot_from_2024-01-20_16-15-24.png
|
|
| Attachment 20: Screenshot_from_2024-01-20_16-15-52.png
|
|
| Attachment 21: Screenshot_from_2024-01-20_16-16-37.png
|
|
| Attachment 22: Screenshot_from_2024-01-20_17-36-22.png
|
|
| Attachment 23: Screenshot_from_2024-01-20_17-36-28.png
|
|
| Attachment 24: Screenshot_from_2024-01-20_17-36-43.png
|
|
| Attachment 25: Screenshot_from_2024-01-20_17-38-22.png
|
|
| Attachment 26: 1000009752.jpg
|
|
| Attachment 27: 1000009753.jpg
|
|
| Attachment 28: 1000009754.jpg
|
|
| Attachment 29: 1000009755.jpg
|
|
| Attachment 30: 1000009756.jpg
|
|