 Thu Dec 19 14:07:38 2019, TD, Report - low - aida08 ADC spectrum size 32k cf. 64k channels expcted using layout 6x
|
Note that aida08 spectrum 1.8.L size is (shown as) 32k channels cf. 64k channels expected using layout - attachment 1 - 5
Layout configuration - attachment 6
Why?
|
|
Fri Feb 21 12:16:06 2020, TD, NH, Report - high - unusual FEE64 crash during startup
|
| |
|
Wed Apr 3 12:09:47 2024, NH, Report - aida06 frequently fails to boot first time (PHY error)
|
When booting up AIDA aida06 usually crashes the first time, it fails to get IP from DHCP
After 180 seconds it reboots and seems to connect fine
Log file attached, key part (to me) is this: |
|
Wed Jan 8 10:46:50 2025, TD, Report - aida06 -boot fail due to network issue
|
8:01:25/11:42:48|0x000000d00000-0x000000fe0000 : "user_kernel"
08:01:25/11:42:48|0x000000fe0000-0x000001000000 : "env_variables"
08:01:25/11:42:48|xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20
|
|
Wed Apr 10 14:53:50 2019, NH, Report - FEE stops sending data 6x
|
it seems a FEE somtimes enters a confusing state and stops sending data
the current merger requires all FEEs to be active and so this stops the entire system from proceeding.
On MIDAS the page reports the module is "undefined" |
 Fri Apr 12 15:15:33 2019, NH, Report - FEE Kernel Panics (Update on 48)
|
Update on issue #48 - the "confusing state" is that the FEE has restarted and hence is undefined again.
An attached TTY log from the pi shows that the module is kernel panicking.
I have seen a couple of FEEs panic with the same error now. |
|
Fri Nov 1 14:17:15 2019, Nic, Patrick, Reply: WR Timestamps
|
> > All 12 FEEs have valid WR Timestamps
> > Had to powercycle aida09 once as before raw readout was displaying upper 12 bits of WR timestamp as 0. Unsure of other method.
> >
|
|
Thu Nov 7 10:22:26 2019, Nic, Patrick, Reply: WR Timestamps
|
> > > All 12 FEEs have valid WR Timestamps
> > > Had to powercycle aida09 once as before raw readout was displaying upper 12 bits of WR timestamp as 0. Unsure of other method.
> > >
|
|
Wed Aug 14 12:40:11 2024, JB, Repaired DSSSD delivery 14.09.2024 11x
|
Three BB18-1000 triples AIDAs collected on 14.09.2024
Find attached visual of the wafer and bond wire + factory bias tests accompanying the DSSSDs. elog:669/1
elog:669/2 elog:669/3 |
|
Mon Mar 16 01:07:29 2020, TA, AM, ES, Regular entry 13x
|
02:14 all system wide checks okay
FEE temperatures okay
leakage currents okay and recorded to spreadsheet
good event stats
okay
merger running at 3M items/sec
tape service running at 26MB/sec
All attached to this entry with screenshots to 1-7 |
|
Mon Mar 16 05:08:12 2020, TA, AM, ES, Regular entry 6x
|
02:14 all system wide checks okay
FEE temperatures okay
leakage currents okay and recorded to spreadsheet
good event stats
okay
merger running at around 3M items/sec
tape service running at 26MB/sec
All attached to this entry with screenshots to 1-7 |
|
Thu May 12 21:43:49 2022, BA, MA, Rates
|
Statistic check (screenshot attached).
Temperatures OK (screenshot attached). |
|
Sat Dec 8 15:22:52 2018, TD, Raspberry Pi startup
|
nnrpi1 - FEE64 system consoles
nnrpi2 - USB-controlled ac mains relay, CAEN N1419ET
|
|
Fri Jan 25 12:26:17 2019, NH, Raspberry Pi Startup & Information
|
Two raspberry pis:
nnrpi1 - FEE64 system consoles
nnrpi2 - AC Mains Relay & CAEN HV |
|
Thu Oct 31 09:36:37 2019, TD, RIKEN LayOut directory
|
| |
|
Fri Nov 7 12:30:30 2025, JB, GB, MP, Pulser walkthrough for source tests.
|
13:30 We are going to do the pulser walkthrough for the the source tests.
We are wrapping the snout in some copper first to further establish a better connection with the ground.
|
|
Thu Apr 4 14:07:45 2019, NH, Pulser Configuration
|
Pulser settings during April run:
Rate 2Hz
Delay 250 NS |
|
Mon Oct 18 13:01:04 2021, OH, Proxy config
|
| Proxy for firefox and anydesk |
|
Thu Sep 8 12:37:18 2022, NH, Proxy Port Changed
|
The proxy in Firefox, Yum and AnyDesk has been changed as the old wasn't working
proxy.gsi.de port 3128 is now in use |
|
Wed Apr 28 17:39:35 2021, TD, Preparations for setup of aida13-aida16
|
Updated /etc/dhcpd.conf
|