 Mon Oct 30 09:46:04 2017, Peter Black, Notes on iris install/operation
|
The iris mounts have 2 superimposed constellations of 3mm mounting holes on them that correspond to those of the S2 detector, however the 85x85 square
is missing one hole and the 110x40 rectangle is rotated by 45°. Either constellation may be used. Fixing is intended with M3x16 bolts into 10mm standoffs
used to attach the detector to its mount. |
Mon Nov 6 10:46:53 2017, Peter Black, Faraday cup drawings 
|
| Note that the removal of the supressor reqires the special allen key. |
|
Mon Nov 6 10:50:33 2017, Peter Black, foil mount drawings
|
| |
|
Mon Nov 6 10:52:58 2017, Peter Black, alignment hardware drawings
|
| |
|
Mon Nov 6 16:12:47 2017, Peter Black, chamber drawings
|
| work in progress. |
|
Tue Apr 18 11:05:43 2017, Mirco / Claudia, Setup Preparation
|
status of the setup - 07/04/2017
status of the setup - 21/04/2017 |
|
Wed Nov 15 03:25:08 2017, MD,DK, Run 152
|
Header: Continue with 5.0 MeV/u on CH2_33+10+01
Ender: End
====================================================
|
|
Mon Nov 13 03:52:48 2017, MD, RG, Run 119
|
Header: CH2 #16, beam energy 4.4
Ender:
|
|
Mon Nov 13 06:06:23 2017, MD, RG, Run 120 - junk
|
| Double klick on stopp, so it jumped to 121. R120 file should be empty or non existing. |
|
Mon Nov 13 06:08:52 2017, MD, RG, Run 121
|
Header: CH2 #16, beam energy 4.4
Ender:
|
|
Sat Nov 11 01:40:48 2017, MD, DMK, ASM, Run 86
|
Header: 3.99 MeV/u and CH2_30+25. Continue after reheat the primary target (GPS) between 02:20 and 02:30
Ender:
|
|
Sun Nov 12 23:51:34 2017, MD, DK, RG, Run 114 - Junk
|
| Double clicked the start / stop so it is blank. |
|
Mon Nov 13 00:57:24 2017, MD, DK, RG, Run 117
|
Header: 4.4 MeV/u on @ CH2
Ender:
====================================================
|
|
Wed Nov 15 07:39:26 2017, MD, DK, CLW, End of beamtime, modules reading before turning off
|
Header: end of beamtime - modules reading
Ender:
====================================================
|
|
Mon Nov 13 23:12:50 2017, MD, DK, Run 132
|
Header: Continue CH2 with 3.5 MeV/u
Ender:
====================================================
|
|
Tue Nov 14 00:41:22 2017, MD, DK, Run 133
|
Header: 3.5 MeV/u on C_09
Ender:
|
|
Tue Nov 14 01:41:17 2017, MD, DK, Run 134
|
Header: 3.5 MeV/u on Empty frame
Ender: Stop
|
|
Tue Nov 14 04:16:18 2017, MD, DK, Run 136
|
Header: CH2_33+10+01 with 3.5 MeV/u
Ender:
|
|
Tue Nov 14 06:18:32 2017, MD, DK, Run 137, 138 - Junk
|
| The newly started runs were stopped by MIDAS - bad clicking mouse... |
|
Tue Nov 14 23:07:06 2017, MD, DK, Run 150
|
Header: 5.0 MeV/u wit CH2
Ender: End
====================================================
|