| ID |
Date |
Author |
Subject |
|
188
|
Tue Apr 26 10:06:59 2016 |
CG, PV & TD | Tuesday 26 April |
2 (of 3) WD 3Tb ATA disk drives are not currently mounted on aidas1.
Attempted to mount them but found device names changed at each boot.
See https://elog.ph.ed.ac.uk/AIDA/186
Mounted Seagate Backup Plus 8Tb USB disk drive - currently /dev/sda2 mounted
as /ntfs
See https://elog.ph.ed.ac.uk/AIDA/187
Started Raspberry Pi nnrpi1 - USB controlled ac mains relay OK
Startup AIDA and test with pulser and no external load.
Typical pulser peak widths ~12-14 ch FWHM as expected. |
|
402
|
Tue Oct 25 02:06:34 2016 |
TD | Tuesday 25 October | 10.10 DAQ found stopped
Most recent file R81_169, last accessed 06.26
R81_169 ADC data synchronised
aidas1> ./analyser /TapeData/Sept2016/R81_169
*** TDR format 3.3.0 analyser - TD - October 2016
*** ERROR: READ I/O error: 5002
blocks: 8369
ADC data format: 67712004 ( 1105598.7 Hz)
Other data format: 570667 ( 9317.8 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 17 ( 0.3 Hz)
RESUME: 17 ( 0.3 Hz)
SYNC100: 560442 ( 9150.9 Hz)
FEE64 disc: 8352 ( 136.4 Hz)
MBS info: 1839 ( 30.0 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 81 ( 1.3 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
*** Timestamp elapsed time: 61.245 s
FEE elapsed dead time(s) elapsed idle time(s)
1 0.000 0.000
2 0.000 0.000
3 0.000 0.000
4 0.000 0.000
5 0.244 0.254
6 0.181 0.191
7 0.000 0.000
8 0.000 0.000
9 0.000 0.000
10 0.000 0.000
11 0.000 0.000
12 0.000 0.000
13 0.000 0.000
14 0.000 0.000
15 0.002 0.000
16 0.000 0.000
17 0.001 0.000
18 0.002 0.000
19 0.003 0.000
20 0.000 0.000
21 0.000 0.000
22 0.000 0.000
23 0.085 0.000
24 0.000 0.000
25 0.000 0.000
26 0.000 0.000
27 0.000 0.000
28 0.000 0.000
29 0.000 0.000
30 0.000 0.000
31 0.000 0.000
32 0.000 0.000
*** Statistics
FEE ADC Data Other Data Sample Undefined Pause Resume SYNC100 Disc MBS
Other HEC Data
0 0 0 0 0 0 0 0 0 0
0 0
1 229453 23628 0 0 0 0 23359 269 0
0 22
2 2464367 23972 0 0 0 0 23362 610 0
0 0
3 1700233 23656 0 0 0 0 23358 298 0
0 0
4 650519 23359 0 0 0 0 23359 0 0
0 0
5 15435615 25773 0 0 4 4 23267 2498 0
0 0
6 15768889 25301 0 0 3 3 23291 165 1839
0 0
7 963142 23361 0 0 0 0 23361 0 0
0 0
8 773768 23661 0 0 0 0 23361 300 0
0 0
9 2244651 23523 0 0 0 0 23359 164 0
0 0
10 1833324 24095 0 0 0 0 23362 733 0
0 0
11 276357 23657 0 0 0 0 23362 295 0
0 0
12 542691 23359 0 0 0 0 23359 0 0
0 0
13 1695447 23996 0 0 0 0 23363 633 0
0 0
14 2181674 23530 0 0 0 0 23361 169 0
0 0
15 2203091 23362 0 0 1 1 23360 0 0
0 0
16 2179412 23361 0 0 0 0 23361 0 0
0 0
17 2317043 23549 0 0 1 1 23359 188 0
0 0
18 2579367 23969 0 0 1 1 23356 611 0
0 0
19 2589829 23664 0 0 3 3 23358 300 0
0 0
20 1296289 23357 0 0 0 0 23357 0 0
0 0
21 1624570 24024 0 0 0 0 23361 663 0
0 59
22 513131 23525 0 0 0 0 23360 165 0
0 0
23 3691921 23335 0 0 4 4 23327 0 0
0 0
24 1957221 23650 0 0 0 0 23359 291 0
0 0
25 0 0 0 0 0 0 0 0 0
0 0
26 0 0 0 0 0 0 0 0 0
0 0
27 0 0 0 0 0 0 0 0 0
0 0
28 0 0 0 0 0 0 0 0 0
0 0
29 0 0 0 0 0 0 0 0 0
0 0
30 0 0 0 0 0 0 0 0 0
0 0
31 0 0 0 0 0 0 0 0 0
0 0
32 0 0 0 0 0 0 0 0 0
0 0
*** Timewarps
FEE ADC Pause Resume SYNC100 Disc MBS Undefined Samples
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 0
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
20 0 0 0 0 0 0 0 0
21 0 0 0 0 0 0 0 0
22 0 0 0 0 0 0 0 0
23 0 0 0 0 0 0 0 0
24 0 0 0 0 0 0 0 0
25 0 0 0 0 0 0 0 0
26 0 0 0 0 0 0 0 0
27 0 0 0 0 0 0 0 0
28 0 0 0 0 0 0 0 0
29 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0
31 0 0 0 0 0 0 0 0
32 0 0 0 0 0 0 0 0
*** Program elapsed time: 0.957s ( 8744.751 blocks/s, 546.547 Mb/s)
DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
System-wide checks OK *except* SYNC errors & SYNC pulses - see attachments 4-7
Merger error messages - see attachment 8
Restart merger OK
DAQ STOP OK
DAQ RESET & SETUP OK
ReSYNC OK
All system-wide checks OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
10.22 DAQ starts (R82)
16.07 DAQ continues OK
All system-wide checks OK
17.16 DAQ continues OK
All system-wide checks OK
18.27 All system wide checks OK *except* SYNC pulses - see attachment 9
18.34 DAQ stalled
Most recent file R82_125 last accessed 18.30
All system wide checks OK *except* SYNC errors and SYNC pulses - see attachments 10-13
18.47 AIDA -> safe state
FEE64 power OFF
DSSSD bias OFF |
|
682
|
Tue Oct 24 03:16:07 2017 |
TD, OH | Tuesday 24 October | 11.16 DAQ continues
AIDA file Oct17/R8_107
BNC PB-4
Amplitude 90,000
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency range 25Hz
delay MIN, tail pulse, INT ref
ASIC settings 2017Oct23-14.38.03
11.20 Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
good events statistics stable & OK - see attachments 4 & 5
no merger/tapeserver errors reported since start of run - see attachments 6 & 7
*all* system wide checks OK *except* nnaida21 fails ADC calibration
11.30 Ambient temperature +23.3 deg C, d.p. +4.1 deg C, RH 28.7%
11.30 analysis file Oct17/R7_108 - zero deadtime, 6x MBS and zero ts timewarps - see attachment 8
11.39 DAQ stop
11.44 DAQ start
AIDA file Oct17/R9
Pulser walkthrough
BNC PB-4
Amplitude 90,000-10,000 @ 10,000 step
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency range 250Hz
delay MIN, tail pulse, INT ref
11.53 DAQ stop
See attachment 8
11.44 DAQ start
AIDA file Oct17/R10
Pulser walkthrough
BNC PB-4
Amplitude 12,000-2,000 @ 2,000 step
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency range 250Hz
delay MIN, tail pulse, INT ref
11.53 DAQ stop
See attachment 9
12.06 DAQ starts
AIDA file Oct17/R12
BNC PB-4
Amplitude 90,000
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency range 25Hz
delay MIN, tail pulse, INT ref
ASIC settings 2017Oct23-14.38.03
14.41 online analysis
ADC synchronised - see attachment 10
17.12 DAQ starts
AIDA file Oct17/R13
Background for LuckyDoll automatic threshold determination
BNC PB-4 OFF
ASIC settings 2017Oct23-14.38.03
Slow comparator nnaida13 0xc, nnaida19-22 0xb, all other FEE64s 0xa
DAQ statistics - see attachment 11
17.27 DAQ stop
18.03 DAQ starts
AIDA file Oct17/R16
Background for LuckyDoll automatic threshold determination
BNC PB-4 OFF
ASIC settings 2017Oct23-14.38.03
Slow comparator *all* FEE64s 0xa
DAQ statistics - see attachment 12
18.22 DAQ stop
18.48 DAQ statistics
Slow comparator *all* FEE64s 0xa - see attachment 13
Slow comparator *all* FEE64s 0x9 - see attachment 14
Slow comparator *all* FEE64s 0x8 - see attachment 15
Slow comparator *all* FEE64s 0x7 - see attachment 16
18.53 Detector biases & leakage currents OK - see attachments 13 & 14
FEE64 Temperatures OK - see attachment 15
*all* system wide checks OK *except* nnaida21 fails ADC calibration |
|
590
|
Tue May 23 03:01:52 2017 |
CB, TD, NN, OH | Tuesday 23 May | 11.02 DAQ continues OK
Current file May2017/R22_192
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases; leakage currents OK - see attachment 1
FEE64 Temperatures OK - see attachment 2
good events; statistics OK - see attachment 3
No warnings/errors reported by merger since DAQ GO - see attachment 4
*all* system wide checks OK *except* ADC calibration of nnaida7, 9, 13, 22
11.05 E17/F11 ambient temperature +23.9 deg C, RH 41.3%, d.p. +10.5 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)
Voltage on BRIKEN 3He tubes now ON
11.07 DAQ stops OK
Current file May2017/R22_193
Deleted R22*
Loaded new firmware to test ADC calibration clock issues - attachment 6
Firmware loaded - attachment 7
Restarted Firefox - temperatures still look fine - see attachment 7
System wide checks - nnaida1 clock failed, other clocks OK - attachment 8
ADC calibration failed for nnaida1, 3, 21 - attachment 9
Other system wide checks OK
Statistics - few SYNC pulses received by nnaida 9 and 12. See attachement 10
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
13.10 DAQ started
File May2017/R23
Run Control GO - Tape server GO - Merger Unpause - Merger data rate 0, but Tapeserver sees events and
Merger links are green - see attachment 11
Start ASIC data readout - Merger sees data rate of ~800 000 items/s (OK!)
FPGA clock monitor page (http://localhost:8015/AIDA/MONLOCK/MONLOCK.tml) screenshot attached (12)
Ras Pi system console logs for USB0 attached - see attachment 13
18.00 Merger found stopped. We were unable to stop the DAQ. Powered off FEEs. Power on, only eight were supplied
power.
Blown fuse in USB bias controller - replaced.
Power ON the FEEs. All 24 FEEs mounted.
Current file May2017/R23_27 - stopped at 15:27
18.31 nnaida20 rebooted on its own
18.37 E17/F11 ambient temperature +23.7 deg C, RH 39.8%, d.p. +9.5 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)
18.41 Restarted DAQ
Detector biases; leakage currents OK - see attachment 14
System wide checks - OK *except* several modules failed ADC calibration - see attachment 15
FPGA clock monitor screenshot attached (16)
18.51 Stopped DAQ. Flashed previous firmware on FEEs (FEE_GF_Feb16_24.bin)
Power cycled. All 24 modules mounted OK.
nnaida22 rebooted on its own
Time out Setting up the DAQ on nnaida2 and others. Power cycled again.
nnaida17 rebooted on its own.
Time out Setting up the DAQ on nnaida1. Power cycled again.
19.56 DAQ finally started.
Current run R24
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x64
LEC/MEC fast comparator 0x20
*all* system wide checks OK *except* some ADC calibrations and clock on nnaida1
Temperatures OK
Statistics OK
Logs for nnaida 17,20,22 attached
|
|
159
|
Tue Feb 23 12:16:08 2016 |
TD | Tuesday 23 February 2016 | MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +=5.570uA, ambient temperature +19.8 deg C
DSSSD - AIDA adaptor PCB cabling
4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm)
+ 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler)
+ drain wires -> gold-plated Lemo-00 test input connectors
nnaida 11 & 12 AIDA adaptor PCB rev B
nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted)
ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs
Heavy duty copper cable connects copper front end frames of FEE modules
Nitto 5011N conductive gasket between FEE module and front end frames
Standard ASIC settings
nnaida 11 & 12 - negative input
nnaida 13 & 14 - positive input
Pulser BNC PB-5
Fall time 1.0ms
Rate 100Hz
Delay 250ns
Ampl 5.00000V
Polarity +
Pulse top Tail
Atten 10x
Clamp ON
- polarity via Cooknell SA1 Summing Amplifier
207Bi source, approx centred on DSSSD, approx 3cm from DSSSD
*** N.B. AIDA FEE firmware version 8 ***
File R36
shaping time 8uS
slow comparator 7 (dec)
start: 12.20 stop: 09.54 24.2.16
spectra saved to disk 24.2.16 10.55 BST (sic)
Pulser OFF
09.55 Bias +200V, I_L +=5.695uA, ambient temperature +19.8 deg C
No Merger error messages |
|
346
|
Tue Aug 23 01:49:01 2016 |
TD | Tuesday 23 August |
09.50 DAQ found stopped
No error messages merge/tapeserver - see attachments 1-2
Most recent data file R7_107 last written to 08.13 23.8.16
10.00 Electrical power to AIDA is off for reasons unknown (power saving/maintenance/trip)
3-ph circuit to Julabo FL1106 recirculating chiller is unaffected
10.20 Analysis of R7_107 (most recent data file) shows data synchronised OK
11.30 Yoshida-san informs us that the experimental power to F11 is off for annual inspection/maintenance.
Power should be restored this evening, or possibly, sometime tomorrow.
19.00 Power restored
FEE64 power *off* - as expected following power outage
Detector bias *off* - as expected following power outage
Startup AIDA
System wide checks, FEE64 temperatures and DSSSD bias/leakage currents - see attachments 3-11
19.24 R8 starts
slow comparator 0x10
LEC/MEC fast comparator 0xff
ASIC settings 2016Aug20-15.34.53
Discriminator masks -> 0x0
BNC PB-4 Pulser
Amplitude 90,000
x5 attenuator IN
t_r 50ns tau_d 50us
- polarity
INT ref, delay MIN, tail pulse
19.31 AIDA SYNC, PAUSE, RESUME, SYNCtime warp, Good data etc statistics - see attachments 12-18 |
|
462
|
Mon Nov 21 21:22:04 2016 |
TD | Tuesday 22 November | 05.59 M7.3 Fukushima-ken Oki (locally 4) http://www.jma.go.jp/en/quake/20161122060517493-220559.html
06.20 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
06.28 AIDA to safe mode (FEE64 power OFF, DSSSD bis OFF) until working hours
13.34 Power up FEE64s and bias DSSSDs
N.B. c. 5 min difference between first and last FEE64 remote filesystem mount
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.8 (10.1.2.250) from 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.8 to 00:04:a3:2a:9c:07 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.6 (10.1.1.250) from 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.6 to 00:04:a3:2a:d4:b7 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.4 (10.1.2.250) from 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.4 to 00:04:a3:2a:ed:b8 via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.2.7 (10.1.2.250) from 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.2.7 to 00:04:a3:2a:b8:8d via p2p2
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.5 (10.1.1.250) from 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.5 to 00:04:a3:2a:d0:10 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPOFFER on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPREQUEST for 10.1.1.17 (10.1.1.250) from 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 dhcpd: DHCPACK on 10.1.1.17 to 00:04:a3:2a:ed:b9 via p2p1
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.8:757 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida8 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.6:771 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida6 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.4:757 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida4 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.7:882 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida7 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:20 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.5:774 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida5 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.17:1005 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida17 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.10 (10.1.1.250) from 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.10 to 00:04:a3:2a:f7:07 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.9 (10.1.1.250) from 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.9 to 00:04:a3:2a:d9:ad via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.12 (10.1.2.250) from 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.12 to 00:04:a3:2a:d0:2f via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.11 (10.1.2.250) from 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.11 to 00:04:a3:2b:11:af via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.16 (10.1.2.250) from 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.16 to 00:04:a3:2a:9c:0e via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.2.15 (10.1.2.250) from 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.2.15 to 00:04:a3:2a:f3:ac via p2p2
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.14 (10.1.1.250) from 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.14 to 00:04:a3:2b:11:b8 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPOFFER on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPREQUEST for 10.1.1.13 (10.1.1.250) from 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 dhcpd: DHCPACK on 10.1.1.13 to 00:04:a3:2b:11:b9 via p2p1
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.10:919 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida10 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.9:678 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida9 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.12:913 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida12 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.11:763 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida11 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.16:860 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida16 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.15:965 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida15 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.14:931 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida14 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:21 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.13:858 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida13 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:24 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPOFFER on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPREQUEST for 10.1.2.19 (10.1.2.250) from 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 dhcpd: DHCPACK on 10.1.2.19 to 00:04:a3:2b:27:54 via p2p2
Nov 22 13:34:24 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.19:967 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida19 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.1 (10.1.1.250) from 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.1 to 00:04:a3:2a:d0:1b via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.20 (10.1.2.250) from 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.20 to 00:04:a3:2a:d0:11 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.22 (10.1.1.250) from 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.22 to 00:04:a3:2a:f6:e9 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.23 (10.1.2.250) from 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.23 to 00:04:a3:2a:d0:06 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.2.24 (10.1.2.250) from 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.2.24 to 00:04:a3:2a:d9:b6 via p2p2
Nov 22 13:34:25 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPOFFER on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPREQUEST for 10.1.1.21 (10.1.1.250) from 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 dhcpd: DHCPACK on 10.1.1.21 to 00:04:a3:2b:27:23 via p2p1
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.1:676 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida1 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.20:890 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida20 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.22:725 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida22 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.23:995 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida23 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.24:813 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida24 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:25 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.21:932 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida21 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: new high speed USB device number 54 using ehci_hcd
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: New USB device found, idVendor=090c, idProduct=1000
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: Product: Silicon-Power
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: Manufacturer: UFD 2.0
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: SerialNumber: 1500592402400008
Nov 22 13:34:49 aidas1 kernel: usb 1-3.1: configuration #1 chosen from 1 choice
Nov 22 13:34:49 aidas1 kernel: scsi12 : SCSI emulation for USB Mass Storage devices
Nov 22 13:34:50 aidas1 kernel: scsi 12:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G 1100 PQ: 0 ANSI: 0 CCS
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: Attached scsi generic sg8 type 0
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] 31461376 512-byte logical blocks: (16.1 GB/15.0 GiB)
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Write Protect is off
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sdh: sdh1
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Assuming drive cache: write through
Nov 22 13:34:50 aidas1 kernel: sd 12:0:0:0: [sdh] Attached SCSI removable disk
Nov 22 13:35:22 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPOFFER on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPREQUEST for 10.1.1.18 (10.1.1.250) from 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:22 aidas1 dhcpd: DHCPACK on 10.1.1.18 to 00:04:a3:2b:11:ae via p2p1
Nov 22 13:35:23 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.18:1006 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida18 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:35:40 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.7:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:52 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.8:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:52 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.10:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:54 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.4:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:54 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.12:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.15:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.9:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:55 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.1:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.24:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.20:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.6:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.22:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.16:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:56 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.14:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:57 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.23:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.21:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.11:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.13:865 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:58 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.19:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:59 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.5:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:35:59 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.17:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:36:49 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.18:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:38:00 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPOFFER on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPREQUEST for 10.1.1.2 (10.1.1.250) from 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 dhcpd: DHCPACK on 10.1.1.2 to 00:04:a3:2a:d9:e1 via p2p1
Nov 22 13:38:00 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.2:728 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida2 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:38:28 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.1.2:864 for /MIDAS@aidas
(/MIDAS@aidas)
Nov 22 13:38:47 aidas1 dhcpd: DHCPDISCOVER from 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPOFFER on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPREQUEST for 10.1.2.3 (10.1.2.250) from 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 dhcpd: DHCPACK on 10.1.2.3 to 00:04:a3:2a:f7:06 via p2p2
Nov 22 13:38:47 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.3:736 for
/data10/XilinxLinux/ppc_4xx/rfs/nnaida3 (/data10/XilinxLinux/ppc_4xx/rfs)
Nov 22 13:39:14 aidas1 rpc.mountd[2860]: authenticated mount request from 10.1.2.3:864 for /MIDAS@aidas
(/MIDAS@aidas)
13.55 DSSSD bias and leakage currents OK - see attachments 4 & 5
FEE64 temperatures OK - see attachment 6
14.30 Ambient temperature +24.8 deg C, d.p. +8.0 deg C, RH 34.5% |
|
182
|
Tue Mar 22 10:59:52 2016 |
TD : PJCS | Tuesday 22 March | MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +=5.515uA, ambient temperature +19.8 deg C
DSSSD - AIDA adaptor PCB cabling
4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm)
+ 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler)
+ drain wires -> gold-plated Lemo-00 test input connectors
nnaida 11 & 12 AIDA adaptor PCB rev B
nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted)
ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs
Heavy duty copper cable connects copper front end frames of FEE modules
Nitto 5011N conductive gasket between FEE module and front end frames
Standard ASIC settings
nnaida 11 & 12 - negative input
nnaida 13 & 14 - positive input
Pulser BNC PB-5
Fall time 1.0ms
Rate 100Hz
Delay 250ns
Ampl 5.00000V
Polarity +
Pulse top Tail
Atten 10x
Clamp ON
- polarity via Cooknell SA1 Summing Amplifier
207Bi source, approx centred on DSSSD, approx 3cm from DSSSD
AIDA FEE firmware version 8
+ sync 500kHz ASIC clock
File R53
shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 16 (dec)
start: 10.50 stop: 13.30 23.3.16
spectra saved to disk 14.30 (BST) (sic)
Pulser OFF
nnaida 11 disc # 55 disabled
12 disc # 2 & 55 disabled
13 & 14 *no* discs disabled
nnaida14 sampling ADCs not calibrated for previous run *but* no wavfeform data streams enabled so not a
problem
new PCS diagnostics indicate FEE ASIC clocks aligned & synchronised - check!
File R53
shaping time 8uS
slow comparator 10 (dec)
LEC/MEC fast comparator 10 (dec)
start: 14.30 23.3.16 stop:
spectra saved to disk
Pulser OFF
nnaida 11 disc # 55 disabled
12 disc # 2 & 55 disabled
13 & 14 *no* discs disabled
nnaida11, 12, 13 & 14 waveforms & verniers enabled - see attachments 1-7
(data queue for nnaida12 waveforms & verniers disabled to avoid problems merger even though nnaida
produces WAVE SYNCs)
R54 stopped at 16:54. disc full. |
|
707
|
Tue Nov 21 00:30:31 2017 |
TD, CB | Tuesday 21 November | 09.27 Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
DAQ statistics OK - see attachment 4
8x FEE64s <10k
2x FEE64s 10-20k
5x FEE64s 20-30k
3x FEE64s 30-40k
1x FEE64s 40-50k
5x FEE64 >50k (nnaida13 255k)
*all* system wide checks OK *except* nnaida7 fails ADC calibration
09.42 per FEE64 rate, 1.8.L, 1.8.W (20ms FSR) spectra - see attachments 5-10
all spectra zero'd
17.05 Detector biases & leakage currents OK - see attachments 11 & 12
FEE64 Temperatures OK - see attachment 13
DAQ statistics OK - see attachment 14
7x FEE64s <10k
4x FEE64s 10-20k
2x FEE64s 20-30k
4x FEE64s 30-40k
2x FEE64s 40-50k
5x FEE64 >50k (nnaida13 261k)
*all* system wide checks OK *except* nnaida7 fails ADC calibration
per FEE64 rate, 1.8.L, 1.8.W (20ms FSR) spectra - see attachments 15-20
pulser peak width nnaida17 69 ch FWHM, nnaida8 72 ch FWHM |
|
925
|
Tue Nov 21 13:56:59 2023 |
NH, CC, HA, MP, AM, VP | Tuesday 21 November | Connect the BB7 on top of the snout to the former aida05 (FEE above aida01)
Also remove copper busbar that is unused
Power on AIDA... rates terrible (attachment 1)
Reground AIDA stand to platform base ... small improvement but nothng major
Decide to power OFF, recheck all connections, aida02 ERNI maybe a bit loose, otherwise all good.
Remove BB7 to try to restore status quo ante
Power on again and rates much improved (attachments 2 & 3)
Looks similar to attachment 44 on Aida test 17/11/23
-> Back to status quo?
15:05 : BB7 put back on the snout and connected (ground + HV)
No significant change has been noticed (attachments 4 & 5)
Attach cables 14 to FEE that BB7 is connected - then will configure DHCP for aida09
Start up aida, configure as before. AIDA09 appears but is not configured (ASIC settings just copied from aida08 for now)
Rates on aida look OK still (attachment 6)
HV (attachment 7)
Temps (attachment 8) |
|
533
|
Tue Mar 21 08:04:43 2017 |
CG, OH | Tuesday 21 March - AIDA checks | 10.00 Powered system on and biased.
Bias voltages and leakage currents ok (see att. 1). Ambient temp @23.1oC.
14.00 Shunji wanted to do some checks with the LN2 fill.
Seems to perhaps be a problem with unshielded cables to the valve switches.
With control box, outlet valve and cables to all valves behind LN2 tank, AIDA survives LN2 fill.
Parts ordered to facilitate moving of components behind the LN2 tank, away from AIDA.
Will carry out further tests once these have been fitted.
17.00 FWHM seem reasonable and similar to Dec 2016.
n-side FEEs see average pulser FWHM of ~70-80ch. nnaida19 noticeably worse @ ~150ch. (att. 2+3)
p-side FEEs worse with average pulser FWHM of ~200ch. nnaida13 worst of these, showing non-Gaussian peaks
with widths @ ~300ch. (att. 4+5)
Will not attempt to solve this now as they must all be disconnected to sort problem with nnaida1. |
|
62
|
Tue Apr 21 06:01:50 2015 |
CG, TD | Tuesday 21 April 2015 | 21/04/15
1325: Recabled the MACB distribution tree as per PC-S instruction yesterday.
Now have nnaida5+6, 13+14 in MACB3 (nnaida5 in output 1) and nnaida3+4, 11+12 in MACB10 (following the numbering system used in yesterday's ELog entry).
Complete system now happily resyncs on initial reset after power cycle.
nnaida7+15 still give a temperature reading of 0oC and nnaida8 is still running hot, but stable, at 65oC.
Visual inspection of cooling crate didn't reveal and air gaps between cooling plates and the FEE cards, or anything else to suggest there would be lower than expected cooling performance.
1340: After complete system start up, nnaida3+4, 11+12 now show absolutely no data (empty histograms, no good events/SYNC pulses in stats). (Attachments 1-4, example good spectrum/stats attachments 5-6)
nnaida5 shows nonsensical data in histograms. (Attachments 7-8)
1500: Swapped HDMI cables from MACB NIM mdules cabling for FEE modules nnaida1+2, 9+10 for nnaida3+4, 11+12 - problem appears to move implying MACB is the problem
Swap MACB #13 for MACB #4 - problem resolved (still in position #10 as per CG numbering system used previously).
1600: nnaida5 does not produce sensible data - typically ~3-4 active channels with ADC and fast disc data with rates ~kHz/channel
Swap nnaida5 & 6 for (currently not used and not powered) nnaida27 & 28. Update /etc/dhcp/dhcpd.conf, restart dhcpd.
1800: Sync problem resolved, stable operation all afternoon including several system resets - no ReSync issues noticed. SYNC pulses provided to all FEEs consistently.
Connected detector BB18 2977-20 (same detector as used during Feb 2015 tests, with same kapton config as per 1520 on Feb 19th) to system with +ve 100V bias provided to n-side.
Updated firmware in new nnaida5+6 (formerly nnaida27+28) to be in line with all those currently in use.
Used saved ASIC settings from Feb 2015 visit and see similar FWHM in most spectra to those found during February after connecting heavy duty copper braids in loop between FEE modules in use.
nnaida5 still does not produce sensible data with almost identical spectra/stats to those seen before the module was replaced.
To be investigate tomorrow. |
|
746
|
Tue Oct 2 01:55:11 2018 |
OH, TD | Tuesday 2 October | 09.54 DAQ continues OK - current file Sep18/R2_26
09.55 all system wide checks OK *except* nnaida7 fails ADC calibration
detector biases & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
good event statistics OK - see attachment 4
nnaida2 rate due to one hot channel
Merger OK - see attachment 5
TapeServer OK - see attachment 6
no errors or warnings shown by server terminal sessions
1.8.L spectra - see attachments 7 & 8
1.8.W spectra 20us FSR - see attachments 9 & 10
10.00 temperature +25.7 deg C, RH 29.6%, d.p. +6.4 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level c. 80%
10.03 ASIC check load (file Sep18/R2_26) |
|
148
|
Tue Feb 2 17:32:46 2016 |
CG, TD | Tuesday 2 February 2016 | Bias +200V, I_L +6.955uA, ambient temp +20.2 deg C
MSL type BB18(DS)-1000 2998-20
~42kBq 207Bi source ~3cm from DSSSD centre
Standard ASIC settings
shaping time 8us
BNC PB-5
frequency 100Hz
amplitude 5.0000V
x10 attenuation
Slow comparator 16 (dec) - saved to disk c. 18.58 BST (sic) 2.2.16
Slow comparator 10 (dec) - saved to disk c. 10.49 BST (sic) 3.2.16
10.54 3.2.16 I_L +6.305uA, ambient temp +20.1 deg C
Slow comparator 22 (dec) - saved to disk c. c. 12.31 BST (sic) 3.2.16 - see attachment 1
Slow comparator 16 (dec) - saved to disk c. c. 13.04 BST (sic) 3.2.16 - see attachment 2
Slow comparator 12 (dec) - saved to disk c. c. 14.15 BST (sic) 3.2.16 - see attachment 3
Slow comparator 10 (dec) - data to disk file R1 - see attachment 4
start: stop: 14.20
AIDA adaptor PCB ground links not fitted
Slow comparator 10 (dec) - data to disk file R2 - see attachment 5
start: 14.20 stop: 14.53
4x ground links fitted
14.22 3.2.16 I_L +6.625uA ambient temp +20.2 deg C
Slow comparator 10 (dec) - data to disk file R3 - see attachment 6
spectra to disk at 16.19 BST (sic) 3.2.16
start: 14.55 stop: 15.14
4x ground links fitted
BNC PB-5
amplitudes 9.00000 - 1.00000 @ 1.00000V step
Slow comparator 9 (dec) - data to disk file R4 - see attachment 7-9
start: 15.22 stop: 16.55
BNC PB-5
amplitude 5.00000V
From attachments 7-8 we can observe that rates (pulser @ 100Hz + 207Bi) are
generally sensible with slow comparator threshold = 9 (dec). Overall, merge
data rates ~110k data items / s.
Quick calculation suggests threshold (keV) ~ slow comparator setting * 10 |
|
141
|
Tue Jan 19 18:09:53 2016 |
CG, TD | Tuesday 19 january 2016 |
18.00 Swapped input cables to nnaida11 and nnaida14
both cables LH coupler + 2x 34-way Samtec ribbon cables + 3M 1245 1.4mil Copper screen w/ground wire
RH coupler not fitted
both ground wires tied to BNC cable from pulser to AIDA adaptor PCBs at BNC(F)-Lemo-00(M) adaptor
Before swap, input cable attached to nnaida11 exhibited typical peak widths ~50 ch FWHM, cable
attached to nnaida exhibited double peaking and other structure
This is unchanged following swap => grounding and/or AIDA adaptor PCB significant *not* cable
See attachments 1-4 post swap
nnaida11 ASIC 2*L ~40-60 ch FWHM pulser peak width
standard ASIC settings, shaping time 2us |
|
713
|
Tue Jun 19 06:08:03 2018 |
TD | Tuesday 19 June 2018 | 13.00
Julabo FL11006 chiller
water level 75% (OK)
set point +20 deg C
chiller ON
aidas1
em1 DHCP configuration fails - Baba-san informed
aidas1 restarted - 395 days since last filesystem check - filesystem fsck -p commences
progress pauses @ 16.2% for extended period (~1h)
boot completes 16.46
Baba-san checks/changes network cabling at B3F hub |
|
391
|
Tue Oct 18 01:43:04 2016 |
TD | Tuesday 18 October | 09/42 DAQ found stopped, no merger error messages
Most recent file R52_211, last accessed 06.30
Restart merger OK
DAQ STOP OK
aidas1> ./analyser2 /TapeData/Sept2016/R52_211
*** GREAT format 3.2.0 analyser - TD - May 2014
*** ERROR: READ I/O error: 5002
blocks: 7619
ADC data format: 61809254 ( 1624588.3 Hz)
Other data format: 354167 ( 9308.9 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 28 ( 0.7 Hz)
RESUME: 28 ( 0.7 Hz)
SYNC100: 347607 ( 9136.5 Hz)
FEE64 disc: 5364 ( 141.0 Hz)
MBS info: 1140 ( 30.0 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 88 ( 2.3 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
Timestamp elapsed time: 38.046 s
FEE module #: 1 elapsed dead time 0.000 s
FEE module #: 2 elapsed dead time 0.011 s
FEE module #: 3 elapsed dead time 0.000 s
FEE module #: 4 elapsed dead time 0.000 s
FEE module #: 5 elapsed dead time 0.058 s
FEE module #: 6 elapsed dead time 0.165 s
FEE module #: 7 elapsed dead time 0.000 s
FEE module #: 8 elapsed dead time 0.000 s
FEE module #: 9 elapsed dead time 0.000 s
FEE module #: 10 elapsed dead time 0.000 s
FEE module #: 11 elapsed dead time 0.000 s
FEE module #: 12 elapsed dead time 0.000 s
FEE module #: 13 elapsed dead time 0.000 s
FEE module #: 14 elapsed dead time 0.002 s
FEE module #: 15 elapsed dead time 0.055 s
FEE module #: 16 elapsed dead time 0.000 s
FEE module #: 17 elapsed dead time 0.057 s
FEE module #: 18 elapsed dead time 0.089 s
FEE module #: 19 elapsed dead time 1.021 s
FEE module #: 20 elapsed dead time 0.000 s
FEE module #: 21 elapsed dead time 0.000 s
FEE module #: 22 elapsed dead time 0.000 s
FEE module #: 23 elapsed dead time 0.085 s
FEE module #: 24 elapsed dead time 0.004 s
FEE module #: 25 elapsed dead time 0.000 s
FEE module #: 26 elapsed dead time 0.000 s
FEE module #: 27 elapsed dead time 0.000 s
FEE module #: 28 elapsed dead time 0.000 s
FEE module #: 29 elapsed dead time 0.000 s
FEE module #: 30 elapsed dead time 0.000 s
FEE module #: 31 elapsed dead time 0.000 s
FEE module #: 32 elapsed dead time 0.000 s
*** Program elapsed time: 1.793s ( 4249.377 blocks/s, 265.586 Mb/s)
R51_211 ADC data synchronised
DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
System-wide checks - see attachments 4 & 5
SYNC errors and SYNC pulses fail, all other tests OK
Statistics - see attachments 6-16
DAQ RESET & SETUP OK
ReSYNC OK
System-wide checks OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
10.02 DAQ start (R53)
18.20 DAQ OK
System-wide checks *all* OK
Statistics - see attachments 17-27
18.30 DAQ stalled on schedule
Most recent file R53_193 last accessed 18.30
AIDA SYNC rates zero in large fraction of FEE64s - see attachment 28
SYNC errors and SYNC pulses fail - see attachments 29-32
DAQ STOP
DAQ RESET
Restart merger
DAQ RESET OK
DAQ SETUP OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
System-wide checks *all* OK
18.45 DAQ starts (R54)
merging stops shortly after start of run - see attachment 33
DAQ HALT, RESET, SETUP OK
Disable H & data transfer #1
Restart merger & tapeserver
Enable H & data transfer #1
18.52 DAQ starts (R55) |
|
852
|
Tue Jun 18 08:03:20 2019 |
DK | Tuesday 18 June 16:00 - 24:00 | Shift change
16:00
115 pnA primary, 290 cps implants at F11
Presently at AIDA R2_616
DAQ is running smoothly - passes all system checks (except ADC calib of nnaida7)
Stats okay, though nnaida19 and 24 running a bit high (seems consistent w/ previous shift) - attach 1
(Consistent with lower thresholds, pasted below)
100Sn setting, 0.3mm Al degrader
ASIC settings 2019Jun13-08.56.35
DSSSD#1 slow comparator 0xa -> 0x1d
DSSSD#2 slow comparator 0xa -> 0x8
DSSSD#3 slow comparator 0x8 -> 0xa
Biases fine - attach 2
Merger okay - attach 3
TapeServer okay - attach 4
16:13 New DTAS run 105
AIDA R2_618
BigRIPS is still 2044 as at 15:03
Temperatures okay - attach 5
16:20 Implant spectra look good, mainly into DSSSD2 - attach 6
Spectra saved in ~spectra/specs-2019Jun18-16.24.33
16:30 Zero stats, histograms
17:03 Old runs ending
AIDA R2_626
In principle DTAS 106 but it switches quickly to 107
BigRIPS 2045
17:10 New run DTAS 108, AIDA R2_627
18:09 New implant profile - attach 6
New stats - attach 7
Looks okay
19:08 AIDA R2_647, DTAS 110
19:14 AIDA R2_648, DTAS 111, BigRIPS 2046
20:08 XY implants - attach 8
Bias - attach 9
Merger - attach 10
TapeServer - attach 11
Stats - attach 12
21:15 New runs: BigRIPS 2047, DTAS 115, AIDA R2_668
22:37 XY - attached 13; stats - attached 14
Primary beam at 120 pnA; implants around 250 cps at F11
23:14 DTAS closes the run
23:20 New runs: AIDA R2_688, DTAS 118, BigRIPS 2048 |
|
851
|
Mon Jun 17 16:01:27 2019 |
CB, CG, OH, TD | Tuesday 18 June 00:00 - 16:00 | 00:00 New day. The DAQ continues OK
Beam setting 2 for enhanced yield of Sn100
No degrader
Statistics OK - see attach 1
FEE64 temps OK - see attach 2
Merger & Tape server OK - see attach 3 & 4
Bias OK - see attach 5
All system-wide checks OK, except nnaida7 fails ADC calibration
00:19 AIDA R2_473
DTAS 82
BigRIPS 2036
01:50 FEE temps and bias/leakage currents OK
Data rate continues at ~620k items/s and ~5.1MB/s
ASIC check performed successfully
02:29 DTAS run 85
BigRIPS run 2037
AIDA ~1.5GB into R2_492
02:30 DTAS reset correlation scaler at start of R2_493
Confirmed by change in value in Correlation status & control @ aidas1 window.
02:36 DTAS run 86 started
BigRIPS run 2038
AIDA file R2_494
04:38 DTAS run 88 stopped. AIDA run R2_512.
DTAS run 89 started.
BigRIPS run 2039
AIDA run R2_512 (1.8GB)
Temps + bias/leakage currents still ok
Data rate still ~600k items/s and ~5MB/s
Individual Good data rates remain roughly constant (see attachment 6)
All system-wide checks passed, except nnaida7 fails ADC calibration
05:48 Stats and histograms zeroed
06:28 DTAS run 91 stopped. AIDA run R2_528 at the time.
DTAS run 92 started
BigRIPS run 2040
AIDA run R2_528
07:50 Made some basic observations with the first file merged after the setting change
Attachment 7 shows implant x:y plots for each DSSD
Attachment 8 show PID for second setting with 100Sn highlighted in red and 96Ag in magenta
08:21 PID per DSSD Attachment 9
Sn100 per DSSD attachment 10
Sn100 Velocity against DSSD 11
Sn100 Velocity against DSSD Energy attachment 12
08:29 DTAS and BigRIPS stop
AIDA on file R2_546
DTAS starts file 95
BigRIPS run 2041
AIDA on file R2_547
08:53 Stats ok - attachment 13
Temps ok - attachment 14
System wide checks ok
ASIC check ok
Bias and leakage still ok though DSSD3 continues to rise - attachment 15
Merger continues with data rate around 700k - attachment 16
09:43 With the new implantation profile depositing most of the Sn100 in DSSD2 but some in the 3rd the
plan is to put in place a 200 micron degrader to bring the deposition into the centre of detector
2
10:15 Overnight MIDAS analysis has been completed.
Spectra have been exported to: /homes/npg/spectra/specs-2019Jun18-10.14.36
MIDAS will be switched to online mode with the change in degrader setting
10.33 DAQ stop
AIDA file RIBF147/R2_566
OH/AA/SN add 0.3mm Al degrader to Pb wall immediately upstream of the (CH2)n shield
10.35 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
Water level c. 50% M-H markers
Temperature +24.1 deg C dew point +9.7 deg C RH 39.8%
10.39 DTAS starts file 98
BigRIPS run 2042
AIDA on file R2_567
11:06 Implantation events for the 2nd setting with 0,3mm Al plate - attachments 17-19
FEE64 Rate spectra - attachment 20
FEE64 HitRate spectra - attachment 21
1.8.L spectra - see attachments 22-25
nnaida1 73 ch FWHM, nnaida3 77 ch FWHM - cf. 73 & 78 ch FWHM respectively 10.41 yesterday
1.8.H spectra - see attcahments 26-27
p+n FEE64s 1.8.W spectra 20us FSR - attachment 28
n+n FEE64s 1.8.W spectra 20us FSR - attachment 29
11.30 Check ASIC Control *all* FEE64s & ASICs
zero *all* histograms
zero DAQ stats
11.50 analysis of RIBF147/R2_576
deadtime *all* FEE64s <<1%
no timewarps
11.57 ADC data synchronised - attachment 30
per FEE64 ADC data / 20.48us - attachment 31
12:39 DTAS and BigRIPS stop runs
AIDA on file R2_585
DTAS file 101
BigRIPS run 2043
AIDA on File R2_585
13:23 System wide checks ok
14:38 DTAS and BigRIPS stop runs
AIDA on file R2_683
OH offline analysis of BigRIPS-implant correlations for previous 2h indicates >90% of 100Sn are
now in DSSSD#2 with small d=fraction remaining in DSSSD#3
100Sn setting, 0.3mm Al degrader
ASIC settings 2019Jun13-08.56.35
DSSSD#1 slow comparator 0xa -> 0x1d
DSSSD#2 slow comparator 0xa -> 0x8
DSSSD#3 slow comparator 0x8 -> 0xa
DAQ stats before & after chn age of slow comparator thresholds above - see attachments 33 & 34
before 11x <20k 21x <50k 24x <100k cf after 11x <20k 22x <50k 23x <100k
merger 664k items/s cf 560k data items/s
BNC PB-4 Pulser
Amplitude 90,000
x5 attenuator IN
Frequency 25Hz range, variable min. c. 2.5Hz
t_r 100ns, tau_d 50us
- polarity
Delay MIN, tail pulse
15.03 DAQ start
AIDA file R2_606
DTAS file 104
BigRIPS run 2044
|
|
568
|
Tue May 16 03:18:46 2017 |
TD, OH | Tuesday 16 May | 11.19 DAQ continues OK
Current file May2017/R10_346
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
11.22 Analysis of data file R10_246 - see attachment 6
dead-time/idle-time < 1%
AIDA SYNC100 variations ~700/97000
10.10 E17/F11 ambient temperature +24.5 deg C, RH 38.0%, d.p. +9.4 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
11.23 DAQ stops OK
Current file May2017/R10_347
Files May2017/R10* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
11.30 DAQ starts
File May2017/R11
18.18 Detector biases & leakage currents OK - see attachments 7 & 8
FEE64 Temperatures OK - see attachment 9
18.24 E17/F11 ambient temperature +24.5 deg C, RH 36.8%, d.p. +8.7 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) |
|