Sat Jun 30 03:05:36 2018, OH, Saturday 30 June    
|
11:05 Bias and leakage currents ok - attachment 1
FEE temperatures ok
System wide checks ok
|
Sat Apr 30 16:27:50 2016, TD, Saturday 30 April 2016 photographs 6x
|
Attachments 1-4 MSL type 2977-2- adaptor PCB configurations (looking downstream) L, D, R, U
|
Sat Apr 30 07:46:47 2016, CG,PV,TD, Saturday 30 April 2016 11x
|
MSL type BB18 serial # 2977-20 bias +100V I_L +12.45uA T=23 deg C
(biased by nnaida # 3 & 5 )
|
Sat Sep 3 05:54:14 2016, TD, Saturday 3 September 16x
|
14.20 R13 continues
DSSSD bias/leakage current OK - see attachments 1-2
|
Sat Nov 3 00:37:29 2018, CA, CB, TD, OH, Saturday 3 November 9x
|
09.37 DAQ continues OK - data transfer disabled
FEE64 LEC/MEC slow comparator threshold 0xa
|
Sat Jun 3 08:07:48 2017, OH, CB, AE, Saturday 3 June 16:00-24:00    
|
16:26 DAQ continues OK
all system wide checks ok, *except* nnaida1 clock status (6), nnaida1, 21 ADC calibration
Leakage currents OK - attachment 1
|
Sat Jun 3 00:00:11 2017, LJB, PW, TD, OH, Saturday 3 June 08.00-16.00 19x
|
08.29 BRIKEN 100; BigRIPS 1111 stopping run.
AIDA on run R1_1429
|
Fri Jun 2 16:02:37 2017, CB, Saturday 3 June 00:00-08:00 28x
|
00:02 Noise in nnaida 1 and 2 appears to be reduced.
However, some channels in nnaida1, ASIC4 and nnaida2, ASIC 1 have been dropped. See attachment 1
|
Sat Dec 3 10:49:36 2016, TD, Saturday 3 December  
|
19.48 DSSSD bias & leakage currents OK - see attachments 1 & 2
FEE64 temperatures OK - see attachment 3
Ambient temperature +25.1 deg C, d.p. -3.0 deg C, RH 15.6% |
Sat Sep 29 06:25:23 2018, OH, TD, Saturday 29 September 18x
|
14:25 Moved from 8x DSSD setup to 6x DSSD
Top two detectors removed.
Detector alignments in snout unchanged so can use the 6xDSSD mark from June 2018
|
Sat Oct 29 03:31:03 2016, TD, Saturday 29 October 11x
|
11.30 DAQ continues (R87)
System-wide checks OK *except* SYNC errors & SYNC pulses - see attachments 1-4
|
Sat Oct 28 03:33:10 2017, TD, OH, Saturday 28 October 13x
|
11.33 DAQ running OK - date transfer not enabled
BNC PB-4
|
Sat Oct 27 01:22:43 2018, CA, OH, Saturday 27 October   
|
09:22 DAQ found crashed. Appears to have crashed at 20:23 last night whilst writing R3_0 to file.
Run Control is non responsive
Leakage currents okay - attachment 1
|
Sat May 27 05:38:39 2017, CB, TD, OH, Saturday 27 May 9x
|
13.38 DAQ continues OK
Current file May2017/R27_49
|
Sat Nov 26 12:18:25 2016, AE, Saturday 26 November, Part III 6x
|
19:30 Power cycled of AIDA reuired after Ge filling
20:04 Started new run: R10_0
|
Sat Nov 26 07:11:34 2016, TD, DK, AE, Saturday 26 November, Part II
|
16.11 The cyclotron and BigRIPS condition are now restored and we have good beam
Count rate at F11 plastic is ~8 cps
At F8, they are focued on 41Al (D5 Brho = 7.5235 Tm) |
Fri Nov 25 15:56:36 2016, CG, DK, Saturday 26 November 11x
|
00.55 Bias and leakage currents ok (attachments 1+2).
Temps ok (attachment 3).
|
Sat May 25 06:27:12 2019, TD, Saturday 25 May 12x
|
14.32 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
Water level c. 60% M-H markers
Temperature +25.6 deg C dew point +3.1 deg C RH 23.1%
|
Sat Apr 25 03:56:44 2015, JA, LHB, TD, AE & CG, Saturday 25 April 2015   
|
1130: Rotated forward water inlet connection to point towards rear of AIDA stand to remedy mechanical
conflict with EURICA support frame - see attachments. During drain and re-fill of Julabo FL1106
|
Sat Jun 23 02:44:36 2018, OH, TD, Saturday 23 June 2018 16x
|
DSSSD stack dismounted yesterday to change configuration from 6x to 8x DSSSDs.
|