 Mon May 30 06:03:51 2016, CG, TD, MACB settings
|
14.00 MACB settings (from left -> right)
MACB#
1
2
3
4
5
6
7
|
 Mon May 30 08:18:48 2016, CG, TD - PJCS reply, MACB settings
|
Quote:
14.00 MACB settings (from left -> right) |
|
Mon May 30 08:43:10 2016, CG, TD - PJCS reply, MACB settings
|
Quote:
|
Mon May 30 03:58:10 2016, TD, peakfind not working on aidas1 
|
Peakfind appears not to be working on aidas1 - example spectrum attached
|
|
Mon May 30 02:50:19 2016, CG, Monday 30th May
|
10.30 Pulser walkthrough carried out 90,000 - 10,000 @ 10,000 step
10.40 .msf spectra saved /MIDAS/SpecData/AIDA
|
|
Sun May 29 14:06:31 2016, TD, AE & CG, Sunday 29 May 2016
|
Throughout day:
DSSD2 (3058-25) would not bias, either short circuit or suspiciously low leakage current.
Carried out some test in situ which were inconclusive.
|
|
Sun May 29 20:06:15 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016
|
> Throughout day:
> DSSD2 (3058-25) would not bias, either short circuit or suspiciously low leakage current.
> Carried out some test in situ which were inconclusive.
|
|
Sun May 29 22:35:25 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016
|
> > 22.05 nnaida17 ASIC parameters not loading
> > power cycle & reboot
|
|
Sun May 29 23:28:56 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016
|
>
> > > 22.05 nnaida17 ASIC parameters not loading
> > > power cycle & reboot
|
|
Sun May 29 23:55:15 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016
|
> >
> > > > 22.05 nnaida17 ASIC parameters not loading
> > > > power cycle & reboot
|
|
Mon May 30 00:01:23 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016
|
> > >
> > > > > 22.05 nnaida17 ASIC parameters not loading
> > > > > power cycle & reboot
|
|
Mon May 30 00:07:56 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016
|
> > > >
> > > > > > 22.05 nnaida17 ASIC parameters not loading
> > > > > > power cycle & reboot
|
|
Sun May 29 10:31:59 2016, TD, nnaida19 'H' histogramming enabled indicator dispappears following DAQ start
|
| 18.30 Options for nnaida19 and a.n.other (working) FEE (nnaida18) |
|
Sat May 28 07:31:07 2016, Saturday 8 May 2016, TD, CG 9x
|
15.20 DAQ histogramming & data transfer #1 enabled
Merger configured, started, input paused
Following DAQ GO nnaida9 data transfer 'X' nnaida19 histogramming 'H' disappear - see attachments 1-7
|
|
Sun May 29 10:11:07 2016, TD, CG & reply by PJCS, Saturday 8 May 2016 - reply about 'H' and "X"
|
> 15.20 DAQ histogramming & data transfer #1 enabled
> Merger configured, started, input paused
> Following DAQ GO nnaida9 data transfer 'X' nnaida19 histogramming 'H' disappear - see attachments 1-7
|
|
Fri May 27 11:16:40 2016, TD, [How To] Start and Stop Runs 7x
|
All AIDA operations are controlled from the Dell T410 Workstation aidas1 using web browsers.
AIDA has multiple, independent data acquisition servers connected by an Ethernet network.
|
|
Fri May 27 11:10:37 2016, TD, [How To] Startup AIDA 34x
|
1) Start Julabo FL11006 Recirculating Chiller
See manual (page 19) http://www2.ph.ed.ac.uk/~td/AIDA/Information/Julabo%20FL11006.pdf
|
|
Fri May 27 06:38:27 2016, TD, AE & CG, Friday 27 May 2016 13x
|
14.30 DSSSD stack moved upstream to position DSSSD#3 at centre of EURICA.
Initial tests of detector bias with DSSSD #1-6 were Ok. Unfortunately we were unable to bias
|
|
Thu May 26 14:19:13 2016, Patrick Coleman-Smith, [HowTo] Access AIDA documentation
|
The latest version of the FEE64 software Interface document ( May 2016 ) is available as a .pdf from
http://npg.dl.ac.uk/documents/edoc000/#AIDA. EDOC955
|
|
Thu May 26 10:03:11 2016, Patrick Coleman-Smith, [HowTo] Specification Document for MACB including suggested setup.
|
| Attached is the specification for the MACB with the settings currently available. |
|
Thu May 26 03:46:41 2016, TD, AE & CG, Thursday 26 May 2016
|
11.45 AIDA discriminator rates - see attachment 1
Today's rates similar to yesterday's rates
|
|
Wed May 25 18:51:54 2016, Patrick Coleman-Smith, [HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files
|
The attached firmware file, FEE_GF_Feb16_18.bin, should be saved to /MIDAS/Aida and the FlashPgm.csh file edited
to load "FEE_GF_Feb16_18.bin"
|
|
Thu May 26 01:44:45 2016, Patrick Coleman-Smith, [HowTo] Use the Multiplicity Trigger Firmware, V8.18, and update the files
|
Done. Awaiting test. See attachments 1-2.
|
|
Wed May 25 02:10:51 2016, TD, CG, Wednesday 25 May 2016
|
10.05 Recirculating chiller on
FEE power on
Detector bias on - ambient temp +23 deg C - see attachments 1-2
|
|
Tue May 24 08:28:28 2016, Patrick Coleman-Smith, [HowTo] Save power if not using the Waveforms and restart the Waveforms
|
The USB controlled power Relays are near their AC fuse operating limit which has caused some Fuse failures.
To reduce the power consumption of each FEE64 it is possible to power down the Waveforms ADCs saving about 20W per FEE64.
|
|
Tue May 24 07:12:30 2016, TD, 3x WDC WD30EFRX ATA 3Tb disks added to aidas1 LVM configuration 9x
|
The 3x WDC WD30EFRX ATA 3Tb disks installed in aidas1 in April 2015 (formerly /data20, /data30 and
/data40) have now been added to the aidas1 logical volume management (LVM) configuration to form a
|
|
Tue May 24 06:39:17 2016, TD, CG, per FEE64 waveforms 30x
|
Attachments 1-30 per FEE64 ASIC #1 waveforms
|
|
Tue May 24 00:06:26 2016, TD, 24 May 2016
|
Overnight. DAQ stopped. Detector bias off. FEE power and recirculating chiller on.
08.00 Detector bias on OK - see attachments 1-2
|
|
Mon May 23 17:21:29 2016, Patrick Coleman-Smith, [HowTo] A solution to the problem of no SYNCs
|
When starting Aida some FEE64 fail to provide SYNC data , or any data for that matter, on the ASIC data stream.
The problem is that the ASIC Readout is not starting properly and is becoming stuck waiting for an internal
event which will never arrive.
|
|
Mon May 23 09:17:55 2016, Patrick Coleman-Smith, Multiplicity Trigger Specification
|
| Please read and comment on the attached specification. |