 Fri Nov 4 08:10:46 2016, CG, Pb bricks upstream
|
| Stack of Pb bricks upstream of AIDA+BRIKEN to protect from incoming beam. |
Wed Nov 16 03:13:25 2016, CG, Wednesday 16 November 
|
| 11.30 Leakage currents and FEE temps ok (attachments 1-3) |
|
Sun Nov 20 02:24:53 2016, CG, Sunday 20 November 8x
|
11.20 FEE temps and bias leakages ok (attachments 1-3).
However, stats screen shows no SYNCs being issued and no "Good Events" (attachment 4).
Stop and Go had no effect -> SYNCs output but SYNC related system checks failed (attachment 5+6).
|
|
Wed Feb 1 16:54:40 2017, CG, NP1306 run summary
|
| |
|
Wed Jun 19 08:30:36 2019, CG, Wed Jun 19 16.00 - end of run
|
16.10 DAQ continues as before.
Merger rate ~700k items/s and ~5.3Kb/s
Individual FEE rates remain roughly constant
|
|
Fri Jun 21 09:57:15 2019, CG, B2F network cables
|
AIDA network cables in B2F disconnected, looped and cable tied to hand rail, out of the way.
Labelled AIDA1/AIDA2 according to which network switch they belong to. |
|
Wed Oct 25 12:42:18 2023, CC, AIDA test
|
Started AIDA at 1:41 pm, writing to disk: file BG18OCT2/R6, stopped at 17:26
pict1: HV supply
pict2: temperature
|
|
Tue Nov 6 00:13:00 2018, CB. PJW, TD, OH, CA, Tuesday 6 November 14x
|
09:13 DAQ still running R18_1
Merger and TapeServer OK
System wide checks ok, except for nnaida7 ADC calibration failure
|
 Mon May 22 08:43:10 2017, CB, TD, Patrick, Monday 22 May
|
> 10.35 DAQ continues OK
> Current file May2017/R19_253
>
|
|
Mon May 22 08:53:42 2017, CB, TD, Patrick, Monday 22 May
|
> Concerning nnaida7 and the failure of calibration..... have you tried to calibrate it using the FADC Align & Control ?
> If it still fails then there is a question about the quality of the clock signal being received by this module.
> I will log through and look at the console log for any anomolies but please try and calibrate.
|
|
Mon Jun 5 08:43:24 2017, CB, TD, PW, DK, Monday 5 June 16:00 to 24:00 38x
|
16:43 Leakage currents OK - see attachment 1
FEE64 temperatures OK - see attachment 2
Statistics show rate increase in nnaida13, 21. Reason unclear - see attachment 3
|
|
Thu May 18 02:16:05 2017, CB, TD, OH, Thursday 18 May 10x
|
10.10 DAQ continues OK
Current file May2017/R10_346
|
|
Fri May 19 09:55:54 2017, CB, TD, OH, Logs from Raspberry Pi System Console
|
17:50 Rebooted Server and FEE64. Connected remotely to Ras Pi System Console. Repeated USB connection procedure. All 24 modules can now be seen. Sample
log attached |
|
Fri May 19 10:16:27 2017, CB, TD, OH, DAQ sever rebooted
|
18:16 Finished rebooting DAQ server and acquisition. All OK, except ADC calibration on #7.
Started run May2017/R16
ASIC settings 2017Mar27-16.12.39 *except*
|
|
Sun May 21 02:54:22 2017, CB, TD, OH, Sunday 21 May 10x
|
10.54 DAQ continues OK
Current file May2017/R18_208
|
|
Sat May 27 05:38:39 2017, CB, TD, OH, Saturday 27 May 9x
|
13.38 DAQ continues OK
Current file May2017/R27_49
|
|
Tue May 23 03:01:52 2017, CB, TD, NN, OH, Tuesday 23 May 19x
|
11.02 DAQ continues OK
Current file May2017/R22_192
|
|
Sun Jun 9 03:43:00 2019, CB, TD, CG, OH, Sunday 9 June 28x
|
11.43 DAQ continues OK
ASIC settings 2019May19-17.54.03
|
|
Mon May 22 02:34:51 2017, CB, TD, Monday 22 May 16x
|
10.35 DAQ continues OK
Current file May2017/R19_253
|
|
Wed May 24 03:20:35 2017, CB, TD, Wednesday 24 May 8x
|
11.00 Merger found stopped at 03:27 - current file R24_7
Restarted Merge. Stopped Run control. Run control stopped, got error message - see attachment 1
nnaida 1-16 show error, nnaida 17-24 show stopped - see attachment 2
|