Mon Jun 6 14:24:07 2016, TD, ML & YS, R1118 (AIDA) 10x
|
22.14 R1118 starts
aidas1 has been rebooted
|
Mon Jun 6 15:57:51 2016, TD, ML & YS, R1121 (AIDA) 
|
R1120 stalled shortly after DAQ GO
'unable to connect' etc
|
Fri Jun 10 02:25:45 2016, TD, ML & YS, DAQ State of Play - Friday 10 June 2016 6x
|
10.25 Screenshots showing DAQ state of play during NP1512 |
Fri Jun 10 02:52:02 2016, TD, ML & YS, Friday 10 June 2016 16x
|
10.50 SyncCheck ... EURICA server refusing connection
[aida@d05 euricatssender]$ ./euricatssender -t
|
Fri Nov 17 15:53:03 2023, TD, JB, JG, Friday 17 November contd. 25x
|
AIDA ASIC settuings 2023Nov16-18.55.20
low comparator p+n FEE64s 0xa, n+n 0xf
|
Thu Nov 16 09:09:58 2023, TD, JB, CC, VP, AIDA tests 16/11/2023 48x
|
Viewing AIDA status on Thursday morning 16/11/2023.
Rates and histograms are observed with bPlast HV connected but not powered. The LIMO cables to the booster cards of bPlast are connected and the TAMEX |
Thu Nov 16 17:43:25 2023, TD, JB, CC, VP, AIDA test 16/11/2023 cont.   
|
| Screenshot uploads as I hit the 50 image upload limit. |
Sun Jun 5 01:32:44 2016, TD, DK, GL, AE, PJW, First RIB implantation: Run 67
|
| We restarted the merger (Stop, Setup & Configure, Go, Pause) and then we could restart the DAQ as normal. Rate is ~500 Hz. |
Sat Nov 26 07:11:34 2016, TD, DK, AE, Saturday 26 November, Part II
|
16.11 The cyclotron and BigRIPS condition are now restored and we have good beam
Count rate at F11 plastic is ~8 cps
At F8, they are focued on 41Al (D5 Brho = 7.5235 Tm) |
Sat Nov 26 07:45:48 2016, TD, DK, AE, Offline analysis of R7_45  
|
R7_45 3mm Pb + 0.5mm W (+1mm Al) only (at start of run) changing to 1.5mm W (+2mm Al)
S O R T C O M P L E T E ..... Sat Nov 26 16:46:31 2016
|
Sun Nov 27 06:35:47 2016, TD, DK, AE, Sunday 27 November - part 2 14x
|
14.15 BigRIPS run number is now 1029
15.22 BigRIPS run number is now 1030
|
Tue Mar 28 01:28:12 2017, TD, CG, OH, DK, Tuesday 28 March 15x
|
09.13 DAQ run R3 ends OK (final file R3_9)
|
Mon Nov 7 23:15:14 2016, TD, CG, OH, Tuesday 8 November 12x
|
08.15 DAQ found stalled
Soft reset OK
|
Thu Nov 3 17:42:37 2016, TD, CG, DK, Friday 4 November 32x
|
00.40-02.30 Discussion with PJCS
|
Fri Nov 4 04:35:03 2016, TD, CG, DK, Friday 4 November part 2 36x
|
13.35 Swapped HDMI cables from master MACB to MACB #3 & #7
for HDMI cables from MACB #7 ports 1 & 2 to MACB modules #8 & #9
|
Wed Nov 9 11:07:14 2016, TD, CG, DK, NP1412 R22 R23 6x
|
DAQ start (R22) failed - merger remained in 'want first sync' state, no output to TapeServer -> soft reset OK
start 20.07
|
Sun May 29 10:11:07 2016, TD, CG & reply by PJCS, Saturday 8 May 2016 - reply about 'H' and "X"
|
> 15.20 DAQ histogramming & data transfer #1 enabled
> Merger configured, started, input paused
> Following DAQ GO nnaida9 data transfer 'X' nnaida19 histogramming 'H' disappear - see attachments 1-7
|
Wed Jan 27 14:54:48 2016, TD, CG, Wednesday 27 January 2016 
|
MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +8.110uA, ambient temperature +20.2 deg C
|
Tue May 24 06:39:17 2016, TD, CG, per FEE64 waveforms 30x
|
Attachments 1-30 per FEE64 ASIC #1 waveforms
|
Wed May 25 02:10:51 2016, TD, CG, Wednesday 25 May 2016  
|
10.05 Recirculating chiller on
FEE power on
Detector bias on - ambient temp +23 deg C - see attachments 1-2
|