| ID |
Date |
Author |
Subject |
|
335
|
Sat Oct 21 07:26:13 2017 |
NB, RY, BD, MS | Corrected Calibration D4 | K R G B
m 0.001558636 0.0006599344 0.0015311753 0.0015807021
b -0.6545742444 0.4330534066 2.001278013 1.0994163913
FWHM are <= 3 keV @ 1408
K R G B
3.1458290692 2.5879235958 2.9829238667 3.0707781948
The green leaf of D4 may have a noticeable non-linearity above 1MeV. |
|
175
|
Sat Nov 26 16:54:17 2016 |
AT & AT | Clovers | Calibration of clovers |
|
300
|
Thu May 25 13:38:11 2017 |
AT, PC, KR, JLT, AA | Clover, detectors in new position | Both clover detectors were moved. They are in a symmetrical position. The end on the clover nose is of the order
of 3-4 mm from the AIDA tunnel.
See sketch of CLOVERS with respect to beam.
See photos of the insertion distance of
both CLOVERS |
|
298
|
Thu May 25 12:53:47 2017 |
AT, PC, JLT, KR, AA | Clover, 60Co | 60Co source
Source ID: CD395
same type as 133Ba source
Start: 20:57
Stop:21:18
Position: z=0 cm, No AIDA
Pulser connected
There was an small file (dlt) before this run with no pulser connected (170525_2054_60Co_z0cm_004.dlt),
that run for only 3-4 min.
Files
170525_2057_60Co_z0cm_005.dlt
170525_2057_2118_60Co_z0cm_pulser.root
Comment: we noticed that the two clovers had different statistics for the 1332 peak. To be checked why
(source not in place ?)
The pulser shows similar counts, so the reason can not be deadtime
Answer: the D4 was not in its right position !!!!, efficiency calibrations have to be repeated :-( |
|
297
|
Thu May 25 12:49:55 2017 |
AT, JLT,PC,AA | Clover, 133Ba, LN2 filling | We started the measurement of the source when the N2 filling started. Just to check if there are funny things
related to the filling.
Start: 18:45
Stop: 20:48
The source was in position z=0 cmm (no AIDA)
File name: 170525_1845_2048_133Ba_NFilling_z0cm_noD4Pulser.root |
|
341
|
Sun Oct 22 08:52:17 2017 |
KR,JA,ATD,JLT | Clover resolution | Resolution check using 40K 1460 keV line
in the background measurement overnight
(File: 171022_0126_1101_bck.root)
D4: 2.9 1keV @ 1461.8 keV
G7: 2.98 keV @ 1460.0 keV |
|
406
|
Mon Nov 5 06:46:30 2018 |
KR, YR, MW, JLT, ... | Clover check |
With detectors still on the floor we check signals and found
that D4 gives no signal with PA power. Two power supplies/cables were checked.
The detector was still working just before Jungclaus experiment. In July it was working.
Temperature monitors OK: 76-80 units
We mount both CLovers in position and make all connections.
We apply HV and check the resolution of G7.
Source: 152Eu
File: 181105_1550_CloverCheck_152Eu.root
As can be seen in the attached figure the calibration used last year
is still pretty good
Resolution @ 1408 keV
G7 black: 2.75keV
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 Constant 6.57807e+02 1.35347e+01 4.63240e-02 -7.68897e-07
2 Mean 1.40766e+03 1.96681e-02 6.71225e-04 5.14533e-03
3 Sigma 1.16983e+00 1.52231e-02 1.41407e-05 -1.28285e-02
G7 red: 2.97keV
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 Constant 5.60626e+02 1.17448e+01 3.69357e-02 1.06287e-06
2 Mean 1.40659e+03 2.29862e-02 6.70713e-04 1.36869e-04
3 Sigma 1.26305e+00 1.62145e-02 1.30239e-05 -1.44151e-02
G7 green: 2.75keV
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 Constant 7.87830e+02 1.48889e+01 3.68407e-02 5.57077e-06
2 Mean 1.40597e+03 1.75988e-02 6.70417e-04 -2.47334e-03
3 Sigma 1.17167e+00 1.41220e-02 9.59214e-06 1.55873e-02
G7 blue: 2.73keV
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 Constant 4.99089e+02 1.19364e+01 -6.77351e-03 -4.15987e-06
2 Mean 1.40489e+03 2.17210e-02 2.57134e-05 2.38923e-03
3 Sigma 1.16057e+00 1.73778e-02 3.14777e-06 2.01018e-02
FWHM: |
|
331
|
Wed Oct 18 08:46:23 2017 |
NB, SG, AT, JL | Clover G7 resolution | G7 clover was on the stand
Source: 152Eu
File: 171018_1627_152Eu_G7.root
Resolution check for 1408 keV peak
FWHM(keV) Mean (keV)
G7Black 2.88 1407.2
G7 Red 3.06 1406.8
G7 Green 2.81 1407.0
G7 Blue 2.93 1406.5 |
|
317
|
Mon May 29 04:17:34 2017 |
YS | Clover Efficiency | Clover gamma detection efficiency calculation with 152Eu
Date of the measurement: 2017-05-26 10:15
root file: 170526_1015_152Eu_noAIDA_z0cm_014.root
Gamma Energy[keV] {121.781700, 244.697500, 344.278500, 444.000000, 778.904500, 867.378000, 964.100000,
1112.074000, 1408.011000}
Crystal ID 152 Efficiency[%] {1.536508, 0.978779, 0.736707, 0.591553, 0.359426, 0.338228, 0.300229, 0.272331,
0.220314}
Crystal ID 152 Efficiency Error {0.030465, 0.021204, 0.014732, 0.016358, 0.008284, 0.011340, 0.006673,
0.006173, 0.004757}
Crystal ID 153 Efficiency[%] {1.679147, 1.051609, 0.799702, 0.628184, 0.386672, 0.387489, 0.328493, 0.300337,
0.236573}
Crystal ID 153 Efficiency Error {0.033341, 0.023338, 0.016004, 0.017827, 0.008906, 0.013626, 0.007298,
0.006773, 0.005071}
Crystal ID 154 Efficiency[%] {1.402847, 0.922081, 0.696455, 0.593818, 0.348820, 0.341118, 0.298197, 0.276055,
0.215494}
Crystal ID 154 Efficiency Error {0.027933, 0.020478, 0.014004, 0.017865, 0.008087, 0.012283, 0.006708,
0.006288, 0.004660}
Crystal ID 155 Efficiency[%] {1.329735, 0.886053, 0.665180, 0.559708, 0.340513, 0.340755, 0.288800, 0.261229,
0.202480}
Crystal ID 155 Efficiency Error {0.026511, 0.020274, 0.013378, 0.016628, 0.007732, 0.010686, 0.006432,
0.005958, 0.004413}
Crystal ID 156 Efficiency[%] {1.163705, 0.757446, 0.548990, 0.465020, 0.282777, 0.294110, 0.237165, 0.220572,
0.155430}
Crystal ID 156 Efficiency Error {0.023277, 0.017832, 0.011114, 0.014924, 0.006765, 0.010733, 0.005496,
0.005160, 0.003514}
Crystal ID 157 Efficiency[%] {1.420320, 0.906654, 0.672645, 0.536032, 0.347827, 0.346548, 0.298879, 0.269536,
0.196238}
Crystal ID 157 Efficiency Error {0.028367, 0.020536, 0.013537, 0.016528, 0.008115, 0.012147, 0.006664,
0.006128, 0.004314}
Crystal ID 158 Efficiency[%] {1.271836, 0.790926, 0.591132, 0.494340, 0.311442, 0.295866, 0.255764, 0.227822,
0.168103}
Crystal ID 158 Efficiency Error {0.025589, 0.018723, 0.011955, 0.015706, 0.007457, 0.010690, 0.005849,
0.005296, 0.003762}
Crystal ID 159 Efficiency[%] {1.268501, 0.806356, 0.588627, 0.511611, 0.297958, 0.326487, 0.252316, 0.231872,
0.175679}
Crystal ID 159 Efficiency Error {0.025339, 0.018906, 0.011939, 0.016912, 0.007159, 0.011892, 0.005740,
0.005411, 0.003900}
Total Efficiency[%] {11.072600, 7.099903, 5.299439, 4.380266, 2.675436, 2.670601, 2.259844, 2.059754, 1.570310}
Total Efficiency Error {0.078525, 0.057205, 0.037954, 0.047007, 0.022172, 0.033133, 0.018054, 0.016749, 0.012242}
Fitting Function: 10^{p_0 + p_1*ln(x) + p_2*ln^2(x) + p_3/x^2} (This is the function used in the textbook
"Radiation detection and measurement" by G.Knoll)
Parameters
Total (two clovers):
p_0 = 2.29172e-01 +/- 1.13185e-02
p_1 = 9.48436e-01 +/- 8.89344e-04
p_2 = -1.54934e-01 +/- 7.58240e-05
p_3 = 1.89920e+06 +/- 1.18292e+09
ID152:
FCN=1.11317 FROM HESSE STATUS=NOT POSDEF 23 CALLS 325 TOTAL
EDM=1.40411e-09 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 8.09248e+00 4.00474e-02 1.92940e-06 7.13568e-03
2 p1 -2.02411e+00 8.19548e-03 4.82585e-07 4.27674e-02
3 p2 9.78402e-02 1.18086e-03 2.33269e-08 2.59077e-01
4 p3 -2.11550e+09 1.97563e+08 5.04375e+02 2.35344e-13
ID153:
FCN=7.1582 FROM HESSE STATUS=NOT POSDEF 23 CALLS 345 TOTAL
EDM=1.28369e-11 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 5.98204e+00 4.02864e-02 1.42623e-06 1.27251e-03
2 p1 -1.30120e+00 8.24403e-03 3.10231e-07 7.00775e-03
3 p2 3.70097e-02 1.18706e-03 2.80719e-08 3.85335e-02
4 p3 -1.43256e+09 1.97976e+08 3.41550e+02 1.75334e-14
ID154:
FCN=7.31777 FROM HESSE STATUS=NOT POSDEF 23 CALLS 300 TOTAL
EDM=7.25203e-09 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 4.60707e+00 4.07462e-02 1.09841e-06 -1.28042e-02
2 p1 -8.62719e-01 8.33215e-03 2.05688e-07 -8.63564e-02
3 p2 9.84262e-04 1.20127e-03 2.86738e-08 -5.66097e-01
4 p3 -1.45278e+09 2.00179e+08 3.46370e+02 5.24463e-13
ID155:
FCN=8.93044 FROM HESSE STATUS=NOT POSDEF 23 CALLS 325 TOTAL
EDM=1.56376e-09 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 3.36149e-01 4.05951e-02 1.02424e-06 1.66747e-02
2 p1 5.96907e-01 8.27701e-03 1.78992e-07 9.42383e-02
3 p2 -1.24128e-01 1.19514e-03 3.10496e-08 5.35879e-01
4 p3 -5.49707e+08 1.98933e+08 1.31060e+02 2.34852e-13
ID156:
FCN=27.107 FROM HESSE STATUS=NOT POSDEF 23 CALLS 369 TOTAL
EDM=1.72237e-10 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -6.26350e+00 4.21430e-02 1.78695e-06 -4.63010e-03
2 p1 2.85365e+00 8.58127e-03 6.80363e-07 -2.64484e-02
3 p2 -3.19389e-01 1.24245e-03 7.61484e-08 -1.51241e-01
4 p3 1.16616e+09 2.05264e+08 2.78034e+02 -1.93778e-14
ID157:
FCN=19.4716 FROM HESSE STATUS=NOT POSDEF 23 CALLS 342 TOTAL
EDM=1.04278e-08 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -3.89605e+00 4.09683e-02 1.48832e-06 3.26076e-02
2 p1 2.04214e+00 8.37584e-03 4.86884e-07 1.83059e-01
3 p2 -2.47352e-01 1.20710e-03 5.89732e-08 1.02761e+00
4 p3 9.13701e+08 2.00155e+08 2.17843e+02 1.24035e-13
ID158:
FCN=7.59955 FROM HESSE STATUS=NOT POSDEF 23 CALLS 331 TOTAL
EDM=1.78742e-08 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -8.46924e+00 4.17987e-02 2.01922e-06 -1.01596e-03
2 p1 3.60905e+00 8.55091e-03 8.60466e-07 8.06431e-03
3 p2 -3.83202e-01 1.23257e-03 9.13624e-08 1.28451e-01
4 p3 1.94705e+09 2.02809e+08 4.64212e+02 1.90916e-13
ID159:
FCN=24.8135 FROM HESSE STATUS=NOT POSDEF 27 CALLS 314 TOTAL
EDM=7.91895e-10 STRATEGY= 1 ERR MATRIX NOT POS-DEF
EXT PARAMETER APPROXIMATE STEP FIRST
NO. NAME VALUE ERROR SIZE DERIVATIVE
1 p0 -1.15142e+00 4.18270e-02 1.70735e-06 3.54687e-03
2 p1 1.09795e+00 8.55588e-03 2.98767e-07 1.75400e-02
3 p2 -1.67863e-01 1.23250e-03 5.18807e-08 8.63094e-02
4 p3 1.96354e+08 2.02197e+08 4.87057e+05 3.05910e-13
For comparison: EURICA total efficiency - see attachment 3 |
|
340
|
Sun Oct 22 05:15:26 2017 |
RG,RY,MS,ATD,JA,JLT | Check of YSO | We start a systematic check of YSO in BRIKEN DACQ
WE check and correct a configuration file for YSO alone
Conf file: 171022_1306_YSO_Conf.xlsx
First measurement:
change the light pulser attenuation and check
changes of X and Y position
Root file: 171022_1314_pulserAtCenter.root
We change configuration file to remove amplitude
range condition to buil position
New configuration file:171022_1332_YSO_Conf.xlsx
Now start moving the light pulser position using a mask:
Light pulse position: Top Left Out
Root file: 171022_1335_pulseTopLeftOut.root
Light pulse position: Bottom Left Out
Root file: 171022_1341_pulseBottomLeftOut.root
Light pulse position: Bottom Right Out
Root file: 171022_1345_pulseBottomRightOut.root
Light pulse position: Top Right Out
Root file:171022_1350_pulseTopRightOut.root
Light pulse position: Top Left In
Root file: 171022_1401_pulseTopLetIn.root
Light pulse position: Bottom Left In
Root file: 171022_1406_pulseBottomLeftIn.root
Light pulse position: Bottom Right In
Root file: 171022_1410_pulseBottomRightIn.root
Light pulse position: Top Right In
Root file: 171022_1416_pulseTopRightIn.root
Now we ramp the PMT high voltage starting at 600V:
600V, 650V, 700V, 750V, 800V, 900V, 950V, 1000V, 1050V, 1100V, 1150V
Pulser at Top Left Out
Root file: 171022_1445_HVramp_pulseTopLeftOut.root |
|
21
|
Tue May 5 05:04:00 2015 |
J.L. Tain, J. Agramunt, G. Kiss | Change of degrader thickness | For EURICA measurements degrader thickness were increased
trying to decrease MACI and AIDA trigger rate
Before we had 5.7 mm of Al
Now we have:
Degrader: 4.0 + 1.0 + 0.6 + 0.4 +0.3 = 6.3 mm of Al
also 2x 0.8mm Al plates were added before
the MACI start detector (thus covering partially AIDA)
Trigger from AIDA will be taken from 3rd DSSSD |
|
347
|
Tue Oct 24 13:14:47 2017 |
RY | Calibration data for clovers | for energy calibration with 152Eu source
171024_1858_152Eu_G7.root
171024_2112_152Eu_D4.root |
|
332
|
Fri Oct 20 05:33:11 2017 |
KR, NB, SG, RY, JL, AT: | Calibration and Resolution of D4 (after Repair) | Green and Red channels were repaired by crimping and securing the grounding of the cables and fixing the cables securely to the table.
All problems during the repair process were visible on the scope. See example attatched.
Calibration is as:
Edit(10-21): NB realized calibration was not performed on the raw spectra, but on the previously calibrated ones. These values are wrong!
| |
Red |
Green |
Blue |
Black |
| m |
0.427423220774017 |
0.998884435913729 |
2.37782285204219 |
0.98418344391708 |
| b |
0.530526265762205 |
0.578623397588558 |
0.699629095743376 |
-0.148161787849403 |
| |
|
|
|
|
Calculation also attached
FWHM (keV) @ 1408 values were:
Num Col FWHM (now) FWHM (before @ 1333)
G7 Red 3.06 2.77
G7 Green 2.81 2.84
G7 Blue 2.93 2.67
G7 Black 2.88 2.64
D4 Red 2.61 3.41
D4 Green 2.79 3.35
D4 Blue 2.88 3.60
D4 Black 3.17 4.85
|
|
86
|
Fri Oct 14 04:12:50 2016 |
JL Tain et al | CONF | New configuration file:
161014Conf_BrikenFull.xlsx |
|
299
|
Thu May 25 13:24:02 2017 |
AT,PC,KR,JLT,AA | CLOVER, detector not in its rigth position | We have noticed that D4 is not in its right position. That explains the different number of counts in the
detectors.
Probably of the order of 3 cm away from its nominal place.
The position of the other detector should be also checked.
Efficiency calibrations need to be repeated |
|
295
|
Thu May 25 09:51:37 2017 |
A.T, A.A | CLOVER, Ba133 | Source details:
Diameter: 25.05 mm
Dz: 3 mm
Source ID: CD 392
With pulser
Start:17:45
Stop: 18:08
Files saved:
170525_1146_152Eu_z0cm_D4Pulser.root
170525_1745_133Ba_z0cm_PulserD4_002.dlt
Ps. See that the pulser generates peaks in the region 250-270 keV (to avoid people to invent new levels (and
gammas) populated
in the beta decay of 133Ba). |
|
306
|
Fri May 26 03:52:23 2017 |
AT,AA,JLT | CLOVER, 137Cs | 137Cs, No AIDA, Efficiency calibration
Source ID: 393
Same type as 133Ba
Start: 11:51
Stop: 12:10
Files:
170526_1151_137Cs_noAIDA_z0cm_016.dlt
170526_1151_1210_137Cs_z0cm.root |
|
296
|
Thu May 25 10:15:02 2017 |
A.T, G. K, A.M, A. A | CLOVER, 133Ba no pulser |
Source in position z=0 with the carton (cardboard) high-end, high-tech holder, but no AIDA (of course).
No pulser. Remember that the pulser is providing peaks around
Start: 18:11
Stop: 18:31
Files
170525_1811_133Ba_z0cm_003.dlt
170525_1831_133Ba_z0cm_noD4Pulser.root |
|
305
|
Fri May 26 03:24:38 2017 |
GK,VP, AT, AA | CLOVER, 133Ba | 133Ba source efficiency calibration, no AIDA
Start: 11:23
Stop: 11:43
Files:
170526_1123_133Ba_noAIDA_z0cm_015.dlt
170526_1123_1143_133Ba_z0cm.root |
|
316
|
Sun May 28 11:41:24 2017 |
YS | CLOVER energy calibration | Clover calibration with 152Eu
Used peaks [keV]: 121.7817, 244.6975, 344.2785, 444.000, 778.9045, 867.378, 964.100, 1112.074, 1408.011
Up to 444keV is lower energy region, above 778.9045 is higher energy region.
All the peaks were fitted with Gaussian + Second Order Plolinomial(background) + Step Function(background).
Parameters: Second Order, First Order, Offset
ID 152 Lower: 1.14254e-08, 1.57915, 408.94
ID 152 Higher: -3.90753e-10, 1.58167, 1224.11
ID 153 Lower: -7.33088e-09, 1.54588, 264.002
ID 153 Higher: 4.72241e-09, 1.53548, 3541.56
ID 154 Lower: -4.45069e-08, 1.54978, -626.916
ID 154 Higher: -4.48059e-08, 1.58933, -14795.7
ID 155 Lower: -5.93726e-10, 0.666536, 230.739
ID 155 Higher: 1.74281e-09, 0.659392, 3973.56
ID 156 Lower: -4.00636e-09, 0.708287, -509.227
ID 156 Higher: 9.5416e-11, 0.705004, -1574.59
ID 157 Lower: -2.94588e-09, 0.686728, -572.626
ID 157 Higher: 3.24943e-10, 0.683273, -1684.07
ID 158 Lower: 1.30198e-09, 0.668335, 485.045
ID 158 Higher: -4.572e-10, 0.67108, -3189.18
ID 159 Lower: -4.37028e-09, 0.701927, -666.22
ID 159 Higher: 3.40354e-09, 0.685865, 8115.55 |
|